NBS Source
I'm a manufacturer
Compare variants

Stannah Trolleylift 250-500 kg floor level service lift

Verified by manufacturer 5 months ago

Trolleylift 250HP

Stannah Lifts Variant:
Third party certifications:
  • Health & Safety Accreditation

    Health & Safety Accreditation

    Certificate type

  • CHAS

    CHAS

    Certificate type

  • ISO 45001 Health and Safety Management

    Certificate type

  • ISO 9001 Quality Management

    Certificate type

Service and goods lift suitable for loads up to 500 kg over a total distance of 18 m (12 m for 500 kg model).

Jump to:
+44 (0)1264 343777 Website

Application

Suitable for larger loads up to 500 kg over a total distance of 18 m (12 m for 500 kg model), typically transported on trolleys or in roll cages.

Description

Trolleylift is a floor level service list used in pubs, bars or hotels to move beer barrels and crates, or in retail or industrial environments to move larger loads. Designed to help avoid excessive manual handling with risk of injury to staff.


Features and benefits:

  • Three models (250, 300 or 500 kg) available offering a choice of entrance types.
  • Installation in just 2–3 days for a 250 kg lift, or 3–4 days for a 300 kg lift and 8-10 days for a 500 kg lift with minimal disruption.
  • Installed either through the floor or adjacent to a mezzanine floor.
  • Suitable for up to six stops over a total distance of 18 m (12 m for 500 kg).
  • Hinged doors as standard, concertina shutter leaf gate as an option.
  • Smooth, quiet and efficient traction drive system.
  • Easy to clean with a hardwearing finish.
  • Robust push buttons, fully automatic control.
  • Entrance protection is by means of a galvanized collapsible car gate which protects goods from falling when the lift is in motion.
  • The Trolleylift normally serves at floor level and would require a pit in the lowest floor, if a pit cannot be provided the lift can be installed to serve at 175 mm (600 mm for 300 kg) above the lowest floor and a ramp will need to be provided by the builder.


Complies with the Essential Safety Requirements (ESRs) of the Machinery Directive 2006/42/EC and EN 81-3 where applicable.


The Trolleylift is supplied in a structure-supported frame which is galvanized for longer life and does not need load bearing shaft walls. A solid flat base, support at each floor and at the top, together with a pre-formed lift shaft supplied by the builder, is usually all that is required.

General information

Color

Grey

Guidance for specification option:

RAL 7038 - RAL 7038.

Finish

Powder-coated

Material

Steel

Guidance for specification option:

Mild steel sheeting.

Shape

Rectangle

Length

950 mm

Width

1000 mm

Height

1175 mm

1975 mm

Warranty description

One year

Guidance for specification option:

12-month warranty including service visits.

Uniclass

Ss_80_50_01_26 Electric service lift systemsPrimary
Ss_80_50_01_40 Hydraulic service lift systems

CAWS

X12/350 Platform lifts

X12/110 Vertical lifting platform systems

Product range

Service & Goods lifts

Specification data - Electric service lift systems

Lift type

Trolley lift.

Door configuration

Single hinged steel landing door with grey baked enamel finish.

Concertina shutter leaf landing gate with a galvanized finish.

Manufacturer guidance

All doors have safety locks fitted to comply with safety regulations.

Drive type

The 0.66 kW motor is mounted at the top of the lift structure.

Manufacturer guidance

The smooth, quiet motor drives a high quality reduction gearbox fitted with a traction vee-sheave. An electro-magnetic disc brake is supplied with emergency release mechanism. Electrical consumption is minimal due to the reliable controller and counter-balance.

Configuration

As drawing.

Guidance for specification option:

Up to three sides on most models, consult manufacturer for details.

Accessories

None.

Stainless steel lift car.

Stainless steel hinged landing doors.

Load weighing.

Intercom system.

Show more

Capacity

250 kg.

Size (w x d)

1000 x 950 x 1175 mm.

Manufacturer guidance

(w x d x h). If the car has a through/ adjacent car entry arrangement, the car depth and width will be reduced by 50 mm.

Clearance dimensions

770 x 1090 mm.

Manufacturer guidance

Entrance.

Finish

Tough grey backed enamel (RAL 7038) with heavy-duty vinyl covered floor.

Material:

Mild steel sheeting.

Speed

0.17 m/s.

Guidance for specification option:

Nominal.

Power supply

415 V.

Guidance for specification option:

Three-phase supply is required for the lift and a standard power socket within the motor compartment.

Depth

175 mm.

Manufacturer guidance

Pit depth.

Shaft

1320 x 1320 mm.

Headroom

2800 mm.

HasVisualIndicator

true

Guidance for specification option:

'Lift arrival', 'lift occupied' and 'lift position' indicators and audible lift arrival buzzers are fitted at each floor.

Sustainability data

Contains Red List materials

No

Country of material origin

Italy

Country of product manufacture

Italy

Recyclability

Steel can be recycled

Third party certifications

Health & Safety Accreditation

Health & Safety Accreditation

Certificate of Health & Safety Accreditation

CHAS

CHAS

CHAS – Contractors Health and Safety Assessment Scheme SSIP

ISO 45001 Health and Safety Management

ISO 45001 Health and Safety Management

ISO 45001 Health and Safety Management

ISO 9001 Quality Management

ISO 9001 Quality Management

ISO 9001 Quality Management

Literature

Stannah Trolleylift Service Lift

Stannah Trolleylift Service Lift

Stannah Trolleylift 250-300kg user handbook

Stannah Trolleylift 250-300kg user handbook

Case studies

Playing pack horse in top toy store

Playing pack horse in top toy store