NBS Source
I'm a manufacturer

Steel Frame System

Verified by manufacturer 5 months ago

Ash & Lacy

Cold rolled steel frame system (SFS), giving a structurally robust and dimensionally stable warm spaced wall construction.

Jump to:
BOS
+44 (0)121 525 1444 Website

Application

Can be used with the majority of external finishes, across most applications. It is compatible with reinforced concrete and hot rolled steel frames, and traditional, pre-cast concrete and tensioned slab designs. It suits infill, oversail and loadbearing systems:


Infill systems:

Infill between structural slabs and steelwork. Normally offset 20 mm from the edge of the structure.


Oversail systems:

Installed outside the line of the structural frame using specially designed support cleats and brackets. Particularly suitable to projects where the façade treatment needs to have movement joints reduced or removed or where internal floor area needs to be maximised.


Multi-storey loadbearing:

Most commonly used for extensions of old or existing buildings.

Description

The cold rolled SFS offers a structurally robust and dimensionally stable warm spaced wall construction that can be used with most external finishes.


This component supply structural stud and track system, is available to suit infill, oversail and loadbearing systems that provide early weather protection capability to the building.


Features and benefits:

  • Lighter than blockwork which reduces foundation mass and costs.
  • High value commodity.
  • Can be installed in any weather conditions.
  • Easily adapted to site.
  • 100% recyclable and will lose none of its structural strength during the recycling process.
  • Bespoke solutions can be achieved with the flexibility of the products. Consult manufacturer for more information.

General information

Finish

Coated

Material

Steel

Shape

Other

Length

Bespoke

Width

Bespoke

Height

Bespoke

Warranty description

12 year

Uniclass

Pr_20_76_51_21 Cold-formed galvanized steel sectionsPrimary

CAWS

G10/30 Cold-formed galvanized steel

G10/170 Cold-formed galvanized steel

Specification data - Cold-formed galvanized steel sections

Primary components

'U' section standard track.

Guidance for specification option:

Used as head/ base track in wall frames of edge trimmers on floor/ roof frames.

'U' section slotted track.

Guidance for specification option:

Used as head track in infill wall frames.

'C' section stud.

Guidance for specification option:

Used as studs in wall frames and joists in floor/ roof frames.

Ancillary components

Deflection head bracket.

Guidance for specification option:

Used to restrain the head of a 'C' section stud into the head track within infill frames where the slotted head track is not used.

Flat strap.

Guidance for specification option:

Used as bracing straps on panels or as bracing to some lintel constructions.

'Z' bar.

Guidance for specification option:

Used at the head or base of panels where the frame sits partially outside the line of the structure.

Angle - equal legged.

Guidance for specification option:

Used for general building works and connections from lintels and cills to jambs.

Angle - unequal legged.

Guidance for specification option:

Used for general building works and support to sheathing boards.

Standard and special bracket.

Guidance for specification option:

Used to connect oversail frames to the main structure or at the head and base of jambs of infill frames to strengthen the connection to the structure.

Manufacturer guidance

Standard: To BS EN 10346:2015.

Designation: S275GD+Z275.

Material

-

Standard

To BS EN 10346.

Designation

S390GD+Z275.

FrameType

Infill.

Guidance for specification option:

Typically comprises of a series of frames that infill between structural slabs and steelwork.

Oversail.

Guidance for specification option:

Installed outside the line of the structural frame using specially designed support cleats and brackets at each floor level.

Multi-storey loadbearing.

Guidance for specification option:

A total building frame supplied in component form for erection on site.

Bespoke.

Guidance for specification option:

Special bracketry and alternative uses for standard components can be used to achieve a building line as required. Consult manufacturer and insert requirements.

Fixings

Low profile HWH Ø5.5 x 19 mm self drilling screw - LP19-HEX.

Guidance for specification option:

  • Frame to frame connections.
  • Flush finish.
  • 1.0 to 4.0 mm.
  • 14 t.p.i. No.2pt.

HWH Ø5.5 x 25 mm self drilling screw - LS25.

Guidance for specification option:

  • Frame to frame connections.
  • Non-flush finish.
  • 1.0 to 4.0 mm.
  • 14 t.p.i. No.3pt.

Pan head Ø5.5 x 38 mm self drilling screw - CFHS38.

Guidance for specification option:

  • Frame to hot rolled connections.
  • Flush finish.
  • 4.0 to 12.5 mm.
  • 24 t.p.i. No.5pt.


HWH Ø5.5 x 38 mm self drilling screw - HS38.

Guidance for specification option:

  • Frame to hot rolled connections.
  • Non-flush finish.
  • 4.0 to 12.5 mm.
  • 24 t.p.i. No.5pt.

HWH Ø6.3 x 32 mm masonry anchor - MF32.

Guidance for specification option:

  • Frame to concrete connections.
  • 3.0 mm to concrete.

Show more

Manufacturer guidance

All fixings are recommendations. All connections from the frame to any interfacing structure or material must be checked for suitability and design. Contact manufacturer.

Sustainability data

Country of material origin

United Kingdom

Country of product manufacture

United Kingdom

Embodied carbon

A1-A3 (production stage) as defined in BS EN 15804

4.21 kg CO₂ eq/kg

Self declared

Recyclability

100%

Guidance for specification option:

recyclable from the point of demolition.

Recycled content

As defined in clause 7.8 of BS EN ISO 14021

18 %

BIM objects

BOS

NBS BIM Object Standard

This BIM object has been authored to meet the requirements of the NBS BIM Object Standard.

Find out more about the NBS BIM Object Standard.

Platform Compatible Version
Revit
-

1

IFC
-

1