NBS Source
I'm a manufacturer
Compare variants

Stonepanel Stone Cladding

Verified by manufacturer over a year ago

Orient Gold - 610 x 152 mm/ 305 x 152 mm (SPZ-14R/ SPZ-14R-MF)

Taylor Maxwell Variant:
Third party certifications:
  • BBA Agrément Certificate

    BBA Agrément Certificate

    Certificate type

Natural stone cladding system made of panels that utilize quartzite, gneiss, limestone, sandstone and slate.

Jump to:
0203 794 9377 Website

Application

Decorative stone exterior cladding for both indoor and outdoor use or on new or existing buildings when attached to solid walls of masonry or concrete, using cementitious adhesive.

Description

STONEPANEL™ (and STONEPANEL™ Sky) is a natural stone cladding system made of panels that utilize quartzite, gneiss, limestone, sandstone and slate, which are bonded to a cement base and reinforced with glass fibre mesh. The product can be used as a decorative stone exterior cladding for both indoor and outdoor use or on new or existing buildings when attached to solid walls of masonry or concrete, using cementitious adhesive to BS EN 12004-2:2017.


This wall stone cladding achieved an A2-s1, d0 reaction to fire classification to NF EN 13501-1:2013 (Section 7 BBA Agreement certificate ref 21/5908).


STONEPANEL™ Sky panels incorporate an anchor of 2.6 mm stainless steel wire embedded into the concrete base for mechanical fixing to the wall. During installation, a piece of stainless-steel banding is looped through this anchor and fixed to the support wall using stainless steel screws and wall plugs.


STONEPANEL™ cladding can be installed at heights up to 2 metres and STONEPANEL™ Sky can be installed up to any height. STONEPANEL™ is manufactured by CUPASTONE and exclusively distributed by Taylor Maxwell in the UK.


Features and benefits:

  • BBA certificate 21/5908 CUPASTONE wall panels - STONEPANEL™ and STONEPANEL™ Sky.
  • Behaviour in relation to fire – a construction incorporating the panels achieved an A2-s1, d0 reaction to fire classification to NF EN 13501-1:2013 (Section 7 BBA Agrément certificate ref 21/5908).
  • Durability – the panels have a design life of more than 30 years (Section 10 BBA).
  • Air and water penetration – the panels are not watertight but will restrict the ingress of rainwater to the supporting structure (Section 8 BBA 21/5908).
  • Strength and stability – the panels have sufficient strength to resist the negative and positive wind pressures likely to be experienced in the UK and have good impact resistance (Section 6 BBA 21/5908).
  • Hard body impact – the panels achieved adequate resistance to impact and therefore may be considered suitable for us in Categories I, II, 111 and IV as defined in section 6.11 of BBA 21/5908.

General information

Color

Other

Finish

Other

Material

Stone

Shape

Other

Length

Bespoke

Width

Bespoke

Height

Bespoke

Uniclass

Ss_25_20_85_55 Natural stone slab cladding systemsPrimary

CAWS

H20/10 Sheet cladding

H20/155 Sheet cladding (attached to timber battens)

H92/120 Rainscreen cladding

H20/150 Sheet cladding (attached to metal support systems)

Specification data - Natural stone slab cladding systems

Preparation

-

Samples

Guidance for specification option:

Consult manufacturer and insert requirements or omit.

Pre-construction survey

Guidance for specification option:

Consult manufacturer and insert requirements or omit.

Supports

-

Loadbearing supports

Guidance for specification option:

Consult manufacturer and insert requirements or omit.

Restraints

Guidance for specification option:

Consult manufacturer and insert requirements or omit.

Material

Guidance for specification option:

Consult manufacturer and insert requirements or omit.

Fixings

-

Loadbearing support fixings

Guidance for specification option:

Consult manufacturer and insert requirements or omit.

Restraint fixings

Guidance for specification option:

Consult manufacturer and insert requirements or omit.

Waterproofing

Guidance for specification option:

Consult manufacturer and insert requirements or omit.

Thermal insulation

Guidance for specification option:

Consult manufacturer and insert requirements or omit.

Cavity fire barriers

-

Horizontal

Guidance for specification option:

Consult manufacturer and insert requirements or omit.

Vertical

Guidance for specification option:

Consult manufacturer and insert requirements or omit.

Cladding units

-

Material

Natural stone panels.

Grout

Cement-gauged mortars.

Oversize slabs for cutting on site

Not permitted.

Jointing

Cement-gauged mortars.

Site-applied coatings

Guidance for specification option:

Consult manufacturer and insert requirements or omit.

Damp-proof course

Guidance for specification option:

Consult manufacturer and insert requirements or omit.

System accessories

Guidance for specification option:

Consult manufacturer and insert requirements or omit.

Stone type

Quartzite.

Surface finish

Orient Gold.

Panel dimensions

610 x 152 mm.

Guidance for specification option:

  • Weight: 7.0 kg.
  • Stonepanel long (L): SPZ-14R-L.
  • Stonepanel Sky long (L): SPZ-14R-L-MF.

305 x 152 mm.

Guidance for specification option:

  • Weight: 3.5 kg.
  • Stonepanel short (s): SPZ-14R-S.
  • Stonepanel Sky short (s): SPZ-14R-S-MF.

Overall thickness

20—40 mm.

Reaction to fire (to EN 13501-1)

A2-s1, d0.

Third party certifications

BBA Agrément Certificate

BBA Agrément Certificate

Stonepanel Stone Cladding - 21/5908

Case studies

Topgolf, Glasgow

Topgolf, Glasgow

Bridgend Road, Pontyclun

Bridgend Road, Pontyclun

Similar products from Taylor Maxwell

Generix Stone Cladding

Generix Stone Cladding