NBS Source
I'm a manufacturer

SumpGuard® - Automatic Sump Frost Protector

Verified by manufacturer 4 months ago

Andel Ltd

A cost-effective solution that provides additional protection to Andel’s BundGuard® dewatering system when installed in sites susceptible to freezing temperatures.

Jump to:
+44 (0)1484 845000 Website

Application

Suited to both new and retrofitted heating installations.

Description

SumpGuard® is a cost-effective solution that provides additional protection to Andel’s BundGuard® dewatering system when installed in sites susceptible to freezing temperatures.


The system comprises of a control panel and fully submersible ceramic heating element that is designed to prevent water from freezing in a sump size of 600 x 600 x 600 mm.


It is energy efficient, only using enough power to prevent water in the sump from freezing and automatically switching the heating element off when not required.


Features and benefits:

  • Prevents water in the sump from freezing.
  • Allows BundGuard® to operate efficiently in freezing temperatures.
  • Can be part of a new installation or easy retrofit to existing BundGuard® system – no system upgrade required.
  • Cost-effective, low energy use and can save on costly repairs.
  • Extends pump life and protects the BundGuard® system by preventing damage caused by the effects of freezing water in the sump.
  • Minimal maintenance required.
  • Capability to connect to any building management system (BMS).
  • CE certified.
  • UKCA compliant.


The system uses a submersible electrical device in water, therefore strict levels of safety should be followed. All electrical supplies must be isolated before handling or maintaining this system. Installation must only be carried out by trained personnel or a qualified electrician.

General information

Color

Grey

Material

Acrylonitrile butadiene styrene (ABS)

Ceramic

Plastic

Shape

Square

Length

32 mm

Guidance for specification option:

Heating element.

112 mm

Guidance for specification option:

Control panel.

Manufacturer guidance

Depth.

Width

55 mm

Guidance for specification option:

Heating element.

285 mm

Guidance for specification option:

Control panel.

Height

235 mm

Guidance for specification option:

Control panel.

286 mm

Guidance for specification option:

Heating element.

Uniclass

Pr_70_60_36_85 Submersible heatersPrimary

Specification data - Submersible heaters

Description

Automatic sump frost protector.

Manufacturer

Andel Ltd.

Product reference

SumpGuard®.

Power supply

230 V a.c. (at two A maximum). RCD and over-current protected supply (control panel).
230 V a.c. at a current load rating of approx. 1.3 A, maximum power consumption 300 Watts (W) (heating element).

Dimensions

600 x 600 x 600 mm (sump size).
285 x 235 x 112 mm (control panel).
55 x 286 x 32 mm (heating element).

Guidance for specification option:

W x H x D.

Control panel

ABS enclosure with a 'mains on' lamp, 'heater on' lamp and rotary isolator switch.

Heating element

Fully submersible 300 W ceramic heating element protected with a hard plastic mesh.

Guidance for specification option:

  • Air temperature activation: Set by user (factory default setting at +5ºC).
  • Air temperature deactivation: When the temperature rises above the set point.

Ingress protection

IP 68.

Sustainability data

Material

Acrylonitrile butadiene styrene (ABS)

Ceramic

Plastic

Literature

SumpGuard® Data Sheet

SumpGuard® Data Sheet