NBS Source
I'm a manufacturer
Compare variants

Superglass Superwall 32 Cavity Wall Batt - Cavity Wall Insulation

Verified by manufacturer 3 days ago

Superwall 32 Cavity Batt - 75 mm

Superglass Insulation Ltd Variant:
Third party certifications:
  • EPD

    EPD

    Certificate type

  • ISO 9001 Quality Management

    Certificate type

  • BBA Agrément Certificate

    BBA Agrément Certificate

    Certificate type

  • UK Conformity Assessed (UKCA)

    UK Conformity Assessed (UKCA)

    Certificate type

  • CE Marking

    Certificate type

  • BS EN 13501-1

    BS EN 13501-1

    Certificate type

  • DoP

    DoP

    Certificate type

  • CCPI Product

    CCPI Product

    Certificate type

Superglass Superwall 32 is a British Board of Agrément (BBA) approved, non-combustible glass mineral wool insulation cavity wall batt.

Jump to:
+44 (0)808 1645 134 Website

Application

Superglass Superwall 32 is designed to provide thermal insulation in full or partial fill in new external masonry cavity walls, up to 25 metres in height for full fill and without restriction for partial fill in buildings of a domestic and non-domestic nature. Additional requirements apply for buildings above 12 metres in height for full fill and above 25 metres in height for partial fill, please refer to the product BBA certificate for more information.


Superwall 32 is BBA approved for use in all UK exposure zones (subject to conditions detailed in the BBA Certificate)

Description

Superglass Superwall 32 is a British Board of Agrément (BBA) approved, non-combustible glass mineral wool insulation cavity wall batt, manufactured with a water-repellent additive to resist moisture ingress. The flexible batt is supplied at 455mm wide to allow friction fitting between standard vertical wall tie spacings, reducing the need for on-site cutting and waste.


Thermal Conductivity:

Declared thermal conductivity (lambda (λ) value) of 0.032W/mK.


Fire Classification:

Deemed non-combustible with a fire classification of Euroclass A1 (the highest possible rating) when tested to BS EN 13501-1 Reaction to Fire.


CCPI (Code for Construction Products Information)

Holds CCPI Verification Mark. Certificate number: 005800103/1026.


Vapour Resistivity

The product has a nominal vapour resistivity of 5 MN·s/g·m.


Environmental credentials.

  • Manufactured in accordance with ISO 14001 - Environmental Management Systems (EMS). Certificate number: EMS 646508.
  • Contains no ozone-depleting substances or greenhouse gases. For more information, please refer to the Environmental Product Declaration (EPD).
  • Made from up to 84% recycled glass.
  • Generic BRE Green Guide Rating of A+.
  • Our products and their pallets are wrapped in low-density polyethylene (LDPE4) plastic, which contains a minimum 30% recycled material and is fully recyclable. Before recycling, please consult your local authority for guidance.


Standards and Approvals.

  • BS EN 13162:2012(+A1:2015) Thermal insulation products for buildings - Factory made mineral wool (MW) products.
  • BS EN 13172: 2012 Thermal insulation products – Evaluation of conformity.
  • BS EN ISO 9001 - Quality Management Systems (QMS). Certificate number: FM 02264.


Certification:

  • UKCA certified to BS EN 13162:2012+A1:2015. Certificate number: 0086 CPR 469699.
  • CE marked to BS EN 13162:2012+A1:2015. Certificate number: 0751-CPR-399.0-01.
  • BBA certified for full and partial fill applications. Certificate number: 89/2231.


Below DPC level.

The product may be used in situations where it bridges the DPC in

walls; dampness from the ground will not pass through to the inner leaf provided the wall is detailed in accordance with the requirements and provisions of the national Building Regulations.


Water Resistance

Constructions incorporating the product and built in accordance with the Standards listed in section 4.4 of BBA Certificate 89/2231 Product Sheet 3, will resist the transfer of precipitation to the inner leaf and satisfy the national Building Regulations.

General information

Color

Yellow

Material

Glass mineral wool

Glass Fibre

Shape

Rectangle

Length

455 mm

Width

1200 mm

Height

Uniclass

Pr_25_57_06_56 Mineral wool slab insulationPrimary

CAWS

F30/155 Partial fill cavity insulation

F30/150 Full fill cavity insulation

F30/12 Partial fill cavity insulation

F30/10 Full fill cavity insulation

Product range

External Masonry Cavity Walls

Specification data - Mineral wool slab insulation

Standard

To BS EN 13162.

Guidance for specification option:

Manufactured in accordance with BS EN 13162:2012(+A1:2015) Thermal insulation products for buildings. Factory made mineral wool (MW) products. BS EN 13172:2012 Thermal insulation products. Evaluation of conformity BS EN ISO 9001:2015 Quality Management Systems (QMS).


Water resistance construction incorporating the product and built in accordance with the Standards listed in section 4.4 of BBA Certificate 89/2231 Product Sheet 3, will resist the transfer of precipitation to the inner leaf and satisfy the national Building Regulations.


Thickness

75 mm.

Thermal conductivity (maximum)

0.032 W/m·K.

Fire performance

Reaction to fire classification of A1, as defined in BS EN 13501-1.

Guidance for specification option:

All Superglass products are deemed non-combustible and have a fire classification of A1 when tested to BS EN 13501-1 reaction to fire.

Recycled content

Up to 84%.

Guidance for specification option:

Manufactured from up to 84% recycled glass which would otherwise go to landfill.

R-Value

2.30 m²K/W.

Length

1200 mm.

Form

Glass mineral wool batt.

Width (nominal)

455 mm.

Guidance for specification option:

Length: 1200 mm.

Sustainability data

Contains Red List materials

No

Country of material origin

United Kingdom

Country of product manufacture

United Kingdom

Material

Glass mineral wool

Glass Fibre

Manufacturing plant location

Embodied carbon

A1-A3 (production stage) as defined in BS EN 15804

1.35 kg CO₂ eq/kg

Manufacturer guidance

Please see product EPD.

Recycled content

As defined in clause 7.8 of BS EN ISO 14021

84 %

Guidance for specification option:

Manufactured from up to 84% recycled glass which would otherwise go to landfill.

Expected Life

Lifetime

Third party certifications

BIM objects

Platform Compatible Version
Revit
-

1

Third party certifications

EPD

EPD

Environmental Product Declaration (EPD) – Cured Glass Mineral Wool Insulation

ISO 9001 Quality Management

ISO 9001 Quality Management

Quality Management System ISO 9001:2015

BBA Agrément Certificate

BBA Agrément Certificate

SUPERWALL 32 DUAL PURPOSE CAVITY WALL BATT CERTIFICATE 89/2231

UK Conformity Assessed (UKCA)

UK Conformity Assessed (UKCA)

UKCA Certificate - Cured Glass Mineral Wool Insulation

CE Marking

CE Marking

CE Certificate - Cured Glass Mineral Wool Insulation

BS EN 13501-1

BS EN 13501-1

Euroclass A1 Reaction to Fire Classification

DoP

DoP

Declaration of Performance (DoP) - Superwall 32 Cavity Batt - UKCA

CCPI Product

CCPI Product

CCPI Vertified Products Certificate - Superwall Cavity Batts

Literature

Superglass Superwall 32 Cavity Batt - Datasheet

Superglass Superwall 32 Cavity Batt - Datasheet

Insulation Solutions Guide

Insulation Solutions Guide

A Guide to Product Substitution - External Masonry Cavity Wall Insulation

A Guide to Product Substitution - External Masonry Cavity Wall Insulation

Superglass Superwall Cavity Batts Installation Guide - Full & Partial Fill

Superglass Superwall Cavity Batts Installation Guide - Full & Partial Fill

Similar products from Superglass Insulation Ltd

Superglass Adapt Slab 35 - Multi Application Insulation

Superglass Adapt Slab 35 - Multi Application Insulation

Superglass Slab 32 - Multi Application Insulation

Superglass Slab 32 - Multi Application Insulation

Superglass Superwall 34 Cavity Wall Batt - Cavity Wall Insulation

Superglass Superwall 34 Cavity Wall Batt - Cavity Wall Insulation

Superglass Superwall 36 Cavity Wall Batt - Cavity Wall Insulation

Superglass Superwall 36 Cavity Wall Batt - Cavity Wall Insulation