Swimming Pool - Under Tile Waterproofing System
Verified by manufacturer 3 months ago
BBA Agrément Certificate
Certificate type
EPD
Certificate type
Internal swimming pool waterproofing system.
Application
A robust and Crack Bridging waterproofing system, suitable for application under tiles in swimming pools to give protection against negative and positive side pressure.
Description
Waterproofing swimming pools has unique requirements. Not only must it provide a suitable substrate for tiles, but it has to resist positive and in some cases negative side water pressure. It should also have crack-bridging capabilities as these structures tend to settle greatly and can become stressed by the huge amount of water load contained. This Koster system is designed and implemented for waterproofing swimming pools and has a long track record of success.
The system is applied to substrates that are sound and solid as well as free from bond inhibiting agents. As primer, Koster Polysil TG 500 is used. It hardens the substrate and reduces the mobility of salts. The installation of a fillet at the wall-floor-junction is done with Koster Repair Mortar Plus to prevent stresses in the subsequent waterproofing layers.
The negative side waterproofing is achieved with Koster NB 1 Grey. In case of active leakages in the wall or slab, this first needs to be stemmed using Koster KD System (please see separate NBS page on this system, for further information).
The positive side waterproofing is carried out with the crack bridging system Koster NB 4000. This waterproofing material is resistant to foot traffic and can be covered with tiles. It creates an excellent bond to damp substrates. The installation of Koster Glass Fiber Mesh is recommended between the first and second layer of the Koster NB 4000 to enhance the movement resistance.
The tiling can then be performed with the single component and flexible adhesive - Koster BD Flexible Tile Adhesive.
Pipe penetrations are waterproofed using Koster KB-Flex 200 and sealed with Koster KB-Fix 5.
System includes:
- Fillet: Koster Repair Mortar Plus.
- Negative side waterproofing: Koster NB 1 Grey.
- Positive side waterproofing: Koster NB 4000.
- Tile adhesive: Koster BD Flexible Tile Adhesive.
- Penetrations: Koster KB-Flex 200.
For further guidance, please contact the Koster technical team at technical@kosteruk.com.
General information
Color | Other |
Finish | Micro-textured Smooth |
Material | Cementitious Fiber-glass Polymer-modified cement Polymeric |
Shape | Other |
Length | Bespoke |
Width | Bespoke |
Height | Bespoke |
Warranty description | Ten year |
Uniclass | |
CAWS | J30/110 Cold-applied tanking |
Product range |
Specification data - Cold-applied liquid waterproofing systems
Substrates | |
Pointing and filling mortar | Koster Repair Mortar Plus.Guidance for specification option: Slightly expanding, hydrophobic, fast setting repair mortar which is resistant to pressurized water. When mixed with Koster SB Bonding Emulsion it becomes a PCC Mortar. |
Primer | Koster Polysil TG 500. |
Tanking | |
Coatings | Koster NB 1 Grey.Guidance for specification option: Watertight mineral waterproofing with subsequently crystallizing agents. Suitable for positive side and negative side waterproofing. A waterproofing made of Koster NB 1 Grey possesses excellent pressure and abrasion resistance, as well as chemical and sulfate resistance. Approved by the building authorities and tested in accordance with the potable water guidelines. For area waterproofing in new construction and restoration, e.g. waterproofing of basements and tanks. Koster NB 4000.Guidance for specification option: A polymer modified mineral coating for waterproofing building structures inside and outside. It is resistant to rain soon after its application and can be exposed to pressurized water after 24 hours of curing time. Koster NB 4000 is elastic and crack bridging and suitable for waterproofing in areas such as basements, foundation slabs, masonry, and the repair of defective waterproofing layers. |
Reinforcement | Koster Glass Fiber Mesh. |
Protection | |
Jointing tape | Koster Joint Tape 20.Koster Joint Tape 30. |
Pipe sleeves | Koster KB-Flex 200.Guidance for specification option: Sealant for pipe and cable penetrations, even in the case of pressurized water. Koster KB-Flex 200 is a one-component, permanently plastic material and can therefore be directly applied from the cartridge – even in the case of flowing water. |
Adhesive | Koster BD Flexible Tile Adhesive. Guidance for specification option: Single component, mineral flexible adhesive for all mineral building materials in construction. In combination with the Koster BD System suitable for waterproofing wet rooms. Manufacturer guidanceTile adhesive. |
Sustainability data
Contains Red List materials | No |
Country of material origin | Germany |
Country of product manufacture | Germany |
Material | Cementitious Fiber-glass Polymer-modified cement Polymeric |
Manufacturing plant location | |
Recyclability | No |
Recycled contentAs defined in clause 7.8 of BS EN ISO 14021 | 0 % |
Expected Life | 50 year |
Third party certifications
Third party certifications
Literature
Koster Negative Side Waterproofing Brochure
Koster Waterproofing Systems Company Brochure
Koster External Basement Waterproofing Brochure
Koster Waterproofing of Construction Joints
Similar products from Koster Aquatecnic Ltd
Koster NB 4000 - Waterproofing Liquid Coating System
Podium Deck Waterproofing System