Verified by manufacturer 5 months ago
TENTAL Feature Cap
EPD
Certificate type
50 mm wide aluminium curtain walling.
Suitable for optimising grids of residential and commercial buildings, new builds or renovations. Particularly suitable for:
The TENTAL curtain wall offers an extensive range of solutions and creative freedom when designing a facade. It allows modular curtain wall designs with large glazing units to enable maximum transparency with a minimal sightline.
It uses Hydro CIRCAL®, an alloy made with a minimum of 75% recycled end-of-life aluminium, allowing tons of scrap that would otherwise become waste be reintroduced into the system. The thermal break elements are made from recycled xPET, a material that gives a second life to used plastic drinks bottles. Therefore, the TENTAL curtain wall is a suitable solution for current needs in terms of design and sustainability in the building industry.
Features and benefits:
Color | Other Guidance for specification option: A full pallet of exclusive colours. Consult manufacturer. |
Finish | Powder-coated Anodized |
Material | Aluminium Acrylonitrile butadiene styrene (ABS) Polyamide EPDM Thermoplastic elastomer (TPE) |
Shape | Rectangle |
Length | Bespoke |
Width | Bespoke |
Height | Bespoke |
Uniclass | |
CAWS | H11/110 Curtain walling |
Product range |
System performance | Tested in accordance with the requirements of EN 13830. |
Framing | |
Frame members | Hydro CIRCAL® aluminium sections. |
Frame accessories | Aluminium 'Aero' cap.Guidance for specification option: For accentuating lines. Aluminium 'H' cap.Guidance for specification option: For accentuating lines. Aluminium 'U' cap.Guidance for specification option: For accentuating lines. |
Fasteners | Manufacturer guidanceConsult manufacturer and insert requirements. |
Cladding units | |
Glass units | Large glazing unit.Guidance for specification option: Glazing available from 6 mm to 62 mm for flat of faceted curtain wall up to ±10°. Consult manufacturer and insert requirements. |
Glazing accessories | Manufacturer guidanceConsult manufacturer and insert requirements. |
Panels and facings | |
Thermal insulation | ABS insulators.Guidance for specification option: Standard insulation. xPET insulators.Guidance for specification option: High insulation. |
Perimeter seals | Concealed drainage with a central seal for panel drainage. |
System accessories | Inward opening windows.Guidance for specification option: Consult manufacturer and insert requirements. Outward opening windows.Guidance for specification option: Consult manufacturer and insert requirements. Fixing brackets.Guidance for specification option: Positioned on the mullion and offers a personalised design and optimised comfort. Consult manufacturer and insert requirements. SUNEAL sun shading.Guidance for specification option: Can be integrated with all aspects of TENTAL curtain walling. Consult manufacturer and insert requirements. Not required. |
Glazing | Continuous aluminium pressure plate. Punctual polyamide pressure plate. Manufacturer guidanceGlazing installation. |
Profile | Manufacturer guidanceA range of profile depths are available to meet project needs. Consult manufacturer and insert requirements. |
Infill | To EN 13830, up to 850 kg. Manufacturer guidanceMaximum infill weight. Insert requirements. |
Gasket | EPDM and EPDM foam, large vulcanized frames. EPDM and EPDM foam, linear pieces. Manufacturer guidanceForm dependent on project requirements. Consult manufacturer and insert requirements. |
Drainage | Mullion drainage. |
Insulation | Standard. High. Manufacturer guidanceInsulation level. |
Sightline | 50 mm. |
Air permeability | To EN 13830, AE 1500 Pa; to CWCT, 950 Pa. |
Watertightness | To EN 13830, up to RE 1500 Pa; to CWCT, 900 Pa (static), 300/ 900 Pa (dynamic). |
Wind pressure/ suction: | To EN 13830, 2000 Pa (service), 3000 Pa (security); to CWCT, 2400 Pa (service), 3600 Pa (security). Manufacturer guidanceWind pressure resistance. |
Burglar resistance | To EN 1628:2011, EN 1629:2011 and EN 1630:2011, RC2 and RC3. |
Impact resistance | To EN 13830 and CWCT, I5/E5. |
Thermal performance | To CWCT, Uf up to 0.53 W/m²K; Ucw up to 1.4 W/m²K (with Ug = 1.1 W/m²K). |
Acoustic performance | To CWCT, 43 dB. |
Contains Red List materials | No |
Country of material origin | United Kingdom |
Country of product manufacture | United Kingdom |
Embodied carbonA1-A3 (production stage) as defined in BS EN 15804 | 1.9 kg CO₂ eq/kg |
Recyclability | 95 |
Recycled contentAs defined in clause 7.8 of BS EN ISO 14021 | 75 % |