NBS Source
I'm a manufacturer
Compare variants

Terrain P.A.P.A and Pleura Vent Systems

Verified by manufacturer 5 days ago

Terrain Pleura 100

Polypipe Building Services Variant:

Replaces extensive ventilation pipework - saving material and installation costs. Allows more flexibility in the design of internal drainage systems. Eradicates transient air fluctuations.

Jump to:
01622 795200 Website

Application

Attenuation and air regulation system for branch pipework within commercial developments.

Description

Positive air pressure attenuator and air regulator for branch pipework ventilation.

Features and benefits:

  • Replaces extensive ventilation pipework, saving costs in material and installation.
  • Allows more flexibility in the layout and design of internal drainage systems for engineers, architects and design professionals.
  • Offers a point-of-need solution that quickly responds to transient air fluctuations.
  • Compatible with Terrain FUZE Stax (specified separately).
  • Note that valves are to be installed only on Terrain systems.

Terrain Pleura 50:

  • The Terrain Pleura 50 air regulator provides ventilation to branch pipework. It is generally installed on the pipe behind the appliance trap.
  • The Terrain Pleura 50 opens and admits fresh air into the branch pipe when the negative (suction) pressure occurs from an appliance discharging into the pipework system. This equalizes the transient air pressure within the pipework and protects the trap seal. When the flow stops and the internal transient air pressure in the pipework balances, the Terrain Pleura 50 closes by gravity and prevents foul air entering the built environment.

Terrain Pleura 100:

The Terrain Pleura 100 air regulator can be fitted on to the top of a foul or waste stack, or at the end of long low gradient branch drains, to provide ventilation. 

  • The Terrain Pleura 100 opens and admits fresh air under condition of reduced pressure in the discharge pipes and prevents trapped water seals being drawn.
  • As the internal transient air pressure in the pipework balances, the Terrain Pleura 100 closes by gravity and prevents foul air entering the built environment. 

Terrain P.A.P.A.

The Terrain P.A.P.A. is a positive air pressure attenuator, designed to mitigate the affects of positive air fluctuations in the drainage pipework system.

  • As water descends down the drainage stack it creates a negative pressure; if that flow is interrupted or is approaching a change of direction, the negative pressure changes to a positive pressure and moves up the pipe.
  • This low amplitude air wave travels typically at 320 m/s, the speed of sound. As the positive air fluctuation approaches the branch-off point for the Terrain P.A.P.A., the bladder within the unit reacts very quickly, within 0.2 seconds, and starts to expand; this creates a pressure differential at the branch-off point.
  • The branch to the Terrain P.A.P.A. then becomes the path of least resistance and the majority of the positive air pressure is absorbed within the unit.
  • As the transient air pressure within the pipework starts to equalize, the bladder slowly releases the small volume of air into the pipework system at only 12 m/s which will have no effect on the trap seals.

General information

Color

White

Finish

Smooth

Material

Acrylonitrile butadiene styrene (ABS)

Shape

Other

Length

Bespoke

Manufacturer guidance

Maximum diameter

Width

Bespoke

Manufacturer guidance

Maximum diameter.

Height

Bespoke

Uniclass

Pr_65_54_24_02 Air admittance valvesPrimary

CAWS

R11/375 Air admittance valves

R11/45 Air admittance valves

Specification data - Air admittance valves

Standard

To NHBC Standards 2018.
To BS EN 12380 AI Air Admittance Valve (Pleura System).

Guidance for specification option:

In the opinion of the BBA, the Terrain P.A.P.A. (Positive Air Pressure Attenuator) Device, if installed, used and maintained in accordance with this Certificate, can satisfy or contribute to satisfying the relevant requirements in relation to NHBC Standards, Chapter 8.1 Internal services.

Refers to BBA certificate 18/5551, Product Sheet 1.

Material

ABS.

Guidance for specification option:

Body only.

  • Valve: POM.
  • Seal: NBR.
  • Internal insulation: PEIX.
  • Connector: Rubber.

Size

141 x 195 mm.

Guidance for specification option:

Height x maximum diameter (excluding connector).

Jointing

Push fit.

Guidance for specification option:

Via global connector.

Minimum airflow rate

32 L/s.

Guidance for specification option:

Branch/ stack (Europe only; consult manufacturer for details re: other regions).

Verification

-

Third-party certification

-

Integral accessories

Connector.

Operating temperature range

-20ºC to +60ºC.

Guidance for specification option:

CE.

-40ºF to +150ºF (ASSE).

Pressure

Open pressure: -70 Pa 0.0072.
Maximum pressure rating tightness: 10 000 Pa (1 m/40”H20)
at 0 Pa or higher.

Nominal sizes

Guidance for specification option:

DN 75–110 (Europe only).

Consult manufacturer for details and insert requirements.

Sustainability data

Material

Acrylonitrile butadiene styrene (ABS)