NBS Source
I'm a manufacturer

TRADECC PC 509 Rubber Acryl for Water Sealing Underground Structures - Flexible Acrylic-Rubber Injection Resin

Verified by manufacturer 3 months ago

Newton Waterproofing Systems Third party certifications:
  • DoP

    DoP

    Certificate type

A 4-component, elastic acrylic resin with low viscosity that reacts into an elastic gel. Suitable for water sealing of cracks & voids in walls, floors, concrete constructions & underground structures

Jump to:
+44 (0)1732 360095 Website

Application

  • Deep sealing of wet or dry joints and fine cracks.
  • Stage 2 sealing to complete the water sealing operation after Stage 1 has been carried out by products such as TRADECC PC Leakinject UNI 6816 E.
  • Post-construction sealing of construction joints within reinforced concrete structures via the HydroTank 302 Injection Hose system.
  • Ground/ curtain injection.

Description

A high performance, five-part injection resin that reacts to create an acrylic-rubber compound with exceptional durability, flexibility and adhesion. These qualities make TRADECC PC 509 Rubber Acryl perfect for sealing leaks in structures that are subject to settlement or movement, such as movement joints.


The cured resin also swells in contact with water, retaining that moisture so as not to dry or shrink even under seasonal temperature and water level fluctuations.

By adjusting the volume of Initiator (Part E) that is used, the reaction speed of TRADECC PC 509 Rubber Acryl can also be controlled from 18 seconds up to 18 minutes. Coupled with its flexibility, adhesion and low viscosity, the resin is guaranteed to penetrate deep into fine cracks in the substrate, even when dry.


Features and benefits:

  • Penetrates very deep into fine cracks.
  • Swells in contact with water and retains that moisture even at high temperatures.
  • Slow reaction times and very long working life.
  • Suitable for use within injection hose systems such as HydroTank 302 Injection Hose.
  • Extremely low viscosity.
  • Hydrophilic.
  • Non-foaming.
  • Very flexible with high strength.
  • Controlled and very linear reaction times.
  • Very high adhesion to the substrate.
  • High levels of chemical resistance.
  • Non-corrosive.
  • CE marked.


Newton ReSeal System:

The Newton ReSeal System consists of a range of Newton’s advanced concrete repair mortars and injection resins to seal structural and non-structural cracks and defects, whether they are dry or leaking large volumes of water.

The products in the Newton ReSeal System can be used to repair a number of defects, including spalled and broken concrete to walls and pillars, road repairs, and cracks and honeycombing to concrete basement walls, soffits and floors.


Suitable substrates:

  • Reinforced concrete.
  • Steel piled walls (welded flange required).
  • Brick or concrete block walls.

General information

Color

Clear

Manufacturer guidance

Whitish pink - mixed.

Finish

Smooth

Material

Liquid

Guidance for specification option:

Acrylic-rubber

Shape

Formless

Length

Bespoke

Width

Bespoke

Height

Bespoke

Warranty description

Guidance for specification option:

When specified, installed and protected in accordance with the Data Sheet, fully and permanently isolated from UV light and physical damage or wearing, and only to those substrates confirmed within, TRADECC PC 509 Rubber Acryl has a service life that can be equal to the design life of the structure

Uniclass

Pr_20_31_86_02 Acrylic resinsPrimary

CAWS

C42/340 Crack/ void sealing grouts

Specification data - Acrylic resins

Composition

Five-part injection resin that reacts to create an acrylic-rubber compound.

Colour

Clear.

Foaming

No.

Sealing

Yes.

Viscosity at 20°C

25 mPa/S.

Viscosity Category

Very low.

Controlled reaction

Yes - by initiator.

Final performance

Stable.

Shrinkage

Slight.

Flexibility

Extremely good.

Working time

Working day.

Reaction time

18 seconds to 18 minutes.

Rate of expansion

120%.

Adhesion

Very high.

Capacity

24.91 kg container.

Guidance for specification option:

(Part A - Resin), 0.09 kg bottle (Part B - Additive), 2.5 kg bottle (Part C - Catalyst), 23.7 kg container (Part D - Strengthener), 0.625 kg container (Part E - Initiator).

Sustainability data

Country of material origin

Belgium

Country of product manufacture

Belgium

Recyclability

0

Recycled content

As defined in clause 7.8 of BS EN ISO 14021

0 %

Third party certifications

DoP

DoP

TRADECC PC 509 Rubber Acryl - DoP

Literature

TRADECC 509 Rubber Acryl TDS

TRADECC 509 Rubber Acryl TDS

Resin Injection Comparison Table

Resin Injection Comparison Table

Case studies

Movement Joint Resin Injection, London.

Movement Joint Resin Injection, London.