NBS Source
I'm a manufacturer
Compare variants

Type B Rack

Verified by manufacturer 7 months ago

138 200 228

AUTOPA Limited Variant:

Floor mounted cycle rack.

Jump to:
+44 (0)1788 550556 Website

Application

Suitable for all environments where high density, single sided cycle parking is required.

Description

The AUTOPA Type B Cycle Rack is a floor mounted cycle rack based upon the Model R Holder.


Features and benefits:

  • The Type B offers a high single sided cycle parking density.
  • The high and low holders combined ensure that cycles are parked only 305 mm apart (typical parking distance for a Sheffield Cycle Stand is 500 mm).
  • The high holders, which incorporate ramps are alternated with the low holders, ensuring that all holders can accommodate bicycles at the same time at a higher density than single level cycle parking racks.
  • The practical and durable nature of the AUTOPA Type B Cycle Rack ensures that the rack is suitable for all environments where high density, single sided cycle parking is required.
  • 696 mm (height).
  • 1057 mm (width).
  • 305 mm distance between holders (centre to centre).
  • 3 mm galvanized mild steel tube.
  • 20 mm galvanized mild steel bar.
  • Other sizes are available; consult manufacturer.


Installation:

  • Flanged versions require bolting to a suitable concrete surface.
  • Ragged versions require casting into concreted hole, no less than 300 x 300 x 350 mm.
  • Some on-site assembly may be required.

General information

Finish

Galvanized

Guidance for specification option:

Manufactured from mild steel and galvanised to ensure their longevity

Material

Steel

Length

-

Manufacturer guidance

Length varies per number of holders

Width

1057 mm

Height

696 mm

Warranty description

One year

Guidance for specification option:

This product is guaranteed for 12 months (if installed and used correctly).

Uniclass

Pr_40_30_21_12 Carbon steel cycle standsPrimary

CAWS

Q50/32 Cycle stands

Q50/210 Cycle stands

Product range

Velopa Cycle Security

Specification data - Carbon steel cycle stands

Stand type

Cycle.

Number of stands

2.

Base

Ragged.

Finish as delivered

Galvanized.

Weight

11 kg.

Accessories

Not required.

138 100 994 - 12mm Expanding Bolt (3 required per flange).

138 100 999 - 10mm Expanding Bolts (1 required per ramp).

Standards

To ISO 9001, ISO 14001 and OHSAS 18001.

Sustainability data

Country of product manufacture

United Kingdom