NBS Source
I'm a manufacturer
Compare variants

Variofold 80 H (Folding Sliding Wall Hardware)

Verified by manufacturer 3 months ago

19534

Hawa Sliding Solutions AG Variant:
Third party certifications:
  • EPD

    EPD

    Certificate type

Door hardware for large wooden folding walls with panel weights up to 80 kg.

Jump to:
+41 44 787 17 17 Website

Application

Suitable for residential and commercial settings, including:

  • Shopping centres.
  • Airports.
  • Hotels.
  • Restaurants.
  • Banks.
  • Care homes.

Description

Door hardware for large wooden folding walls, for panel weights up to 80 kg. Requires a bottom guide channel, except for two panel installations. Equal panel widths are recommended, consult manufacturer for details.


Features and benefits:

  • Quick assembly.
  • Panel width: 500–900 mm.
  • Suitable for door panel thickness of 35–57 mm.
  • Left and right-handed configurations, as well as inwards or outwards-opening installations can all be achieved using the same components.
  • Light and quiet running.
  • A pivot bearing secures the first panel in the set. The others line up with the stainless steel hinges that bring the panels closer together and minimize the panel stacking space required.
  • Attached to every other panel is a folding (pivot) door catch with an integrated, individually adjustable retainer, to hold the centre fold wall flush when closed without operating a locking mechanism.
  • A communicating pivot door can be added to the panel stack, or the opposing end, consult manufacturer for details.
  • Hollow cross-section seal strips eliminate the problem of light penetrating through gaps between panels.
  • Choice of locking configurations available.
  • Vertical adjustment (±3 mm).


Installation and design:

  • One-sided installations, filling an aperture up to 6000 mm width are possible using the one-panel basic sets, supplementary and pivot door sets (or double this figure for two-sided installations).
  • Consult manufacturer for further details.


Components:

Quantities of each component will vary dependent on variant specified, consult manufacturer for details.

  • Top pivot bearing.
  • Folding/ pivot door catch, adjustable.
  • Four-wheeled trolley M10, plastic-tyred wheels and suspension plate.
  • Four-wheeled trolley M10, plastic-tyred wheels with suspension plate and spacer (19533 only).
  • Suspension profile, aluminium, 208 mm (plain anodized, predrilled).
  • Thrust bearing for bottom guide channel, including driver.
  • Thrust bearing sleeve, 20 mm including driver.
  • Plastic guide, rattle proof, for bottom guide channel (24 x 24 mm).
  • Plastic cover cap for top fixed suspension, anthracite grey RAL 7016.
  • Vertical adjustment key.
  • Suspension assembly locking wrench.
  • Fork spanner SW 13 mm.

General information

Color

Grey

Silver

Finish

Anodized

Material

Aluminium

Stainless steel

Steel

Shape

Rectangle

Warranty description

Two year

Uniclass

Pr_30_36_36_23 Door track and running gearPrimary

CAWS

P21/10 Door track and running gear

P21/350 Door track and running gear

Specification data - Door track and running gear

Standard

To EN 1527.

Third-party certification

TÜV Rheinland LGA Products GmbH, Nürnberg, Germany.

Classification grades (minimum)

-

Durability

6.

Door mass

3.

Initial friction

3.

Form

Running track: Aluminium, plain anodized, pre-drilled, sliding, stacking, Bottom guide channel: Aluminium, plain anodized, undrilled, Hinges: Stainless steel grade 1.4401 (316).

Guidance for specification option:

  • Hinges with heavy load bearings and fixing screws.
  • Panels up to 2500 mm tall require two hinges.
  • Panels up to 3500 mm tall require three hinges.
  • Insert quantity.


Running track

6000 mm.

Cut to size.

Guidance for specification option:

Insert requirements.

Bottom guide channel

Not required.

Guidance for specification option:

Dependent on variant specified, consult manufacturer for details.

6000 mm.

Cut to size.

Guidance for specification option:

Insert requirements.

Manufacturer guidance

  • Installations with two panels on either side and up to 3.6 m wide are possible without a bottom guide channel, other configurations may require the channel.
  • Consult manufacturer for details.

Hollow seals

Guidance for specification option:

  • Insert quantity.
  • Provided in rolls of 10 m (black, rubber).

Locking

Not required.

Bar bolt lock.

Guidance for specification option:

  • Allows locking the folding wall at handle height.
  • Square or hexagonal socket, backset 42.5 mm.

Deadbolt.

Guidance for specification option:

  • Provides unobtrusive, barely visible locking at the panel bottom edge.
  • Galvanized steel deadbolt, 13 mm.

Manufacturer guidance

  • Additional deadbolt or bar bolt locks may be fitted for safety and to keep out unwanted visitors.
  • Both locks engage with floor inserts, or a locking plate.
  • Locking from the inside engages the floor-mounted sleeve (13787).
  • Mortice locks can be used to secure pivot doors (supplied by others).
  • Various locking positions and accessories are available including thumbturns and deadbolt lock keys, consult manufacturer for details.

Accessories/ Other requirements

Not required.

Wall attachment.

Guidance for specification option:

  • Version A: With premises-fitted compensation strip and hollow seal (19657).
  • Version B: Direct wall attachment, requires 6 mm clearance.

Manufacturer guidance

Other accessories and spares are also available, consult manufacturer for details.

Components

Basic set with pivot bearing without guide.

Sustainability data

Contains Red List materials

No

Country of material origin

Switzerland

Country of product manufacture

Switzerland

Recyclability

Yes

Third party certifications

BIM objects

Platform Compatible Version
Revit
 -

1

IFC
 -

1

Third party certifications

EPD

EPD

Hawa EPD Sliding door gear EN

Literature

CAT_EN_Hawa_Variofold_80_H

CAT_EN_Hawa_Variofold_80_H

© 2024 NBS Enterprises Ltd. All rights reserved.