NBS Source
I'm a manufacturer
Compare variants

VORTEX 4 ePIV Terminal Valve Assembly

Verified by manufacturer 4 months ago

VX4E4RxxA0

PETTINAROLI UK LIMITED Variant:

VORTEX 4 series compact terminal valve assembly with 40 mm centre to centre bypass, Belimo ePIV and drain installed in the return. Venturi flow measuring station mounted in the flow.

Jump to:
0121 3582012 Website

Application

The VX4ER-0 is mounted above an extended fan coil drip tray.

Description

The Vortex 4 range of terminal valve assemblies is designed to include all of the required valves for controlling and maintaining a Fan Coil Unit or other hydronic terminal unit. All of these functions are offered in a compact package that is designed for quick and efficient installation by the terminal unit manufacturer over an extended condensate drip tray.


Function:

  • The Vortex 4 valve sets include an Belimo ePIV control valve to maintain design flow rates and provide modulating temperature control as well as a venturi flow measurement device for flow verification purposes.
  • The valve set also includes a flushing bypass which can isolate both the flow and return legs and perform terminal unit flushing and system bypassing operations.
  • The blow down valve within the valve set and connected terminal unit may be flushed out of circuit and subsequently forward flushed to flush the coil.


Configuration:

The VX4 valve assembly is offered in three main configurations to suit most terminal/fan coil unit designs and is offered with a wide range of end connections.

  • Left and Right-Handed: For terminal/fan coil units where the coil is mounted perpendicularly to the floor plate, then typically left and right-handed units will be required.
  • Horizontal: The VX4ER-0 family of valve sets can also be configured horizontally for terminal/fan coil units where the coil is mounted either in parallel orientation to the floor plate or at 45° to the floor plate.
  • Additional four Port valves: The VX4ER-0 family of valve sets can also be fitted with additional four port valves should the need arise, please contact Pettinaroli UK for more information.


Strainers:

The 0X4ER-0 series does not include its own integral strainer within the assembly (our 0X4ER-S series does). The manufacturer recommends it may be prudent to consider the installation of a large bore strainer such as a Pettinaroli Filterball be fitted at the beginning of each section branch pipework and at transitions between clean pipework systems (such as copper, press-fit steel and plastic) and black iron pipework.

 

Please note strainers are intended to help protect the assemblies and terminal/ fan coil units from impurities in the systems media, but this is in no way a substitute for proper media maintenance or cleaning.

General information

Color

Yellow

Orange

Finish

Brass

Material

Brass

EPDM

Shape

Other

Length

Bespoke

Width

Bespoke

Height

Bespoke

Warranty description

Two year

Uniclass

Pr_65_54_95_63 Pressure-independent control valvesPrimary

CAWS

S90/650 Flow-reducing/ servicing valves

S90/650 Flow reducing/ servicing valves

Specification data - Pressure-independent control valves

Pressure rating

PN25.

Temperature range

0–100°C.

Material

Brass body, FKM/ EPDM O-ring.

Connections

15 mm Copper Solder.

22 mm Copper Solder.

1/2" Male BSP.

3/4" Male BSP.

1/2" Female BSP.

3/4" Female BSP.

15 mm Pressfit.

22 mm Pressfit.

15 mm Copper Compression.

22 mm Copper Compression.

Actuator

EP015R2+BAC.

EP020R2+BAC.

EP025R2+BAC.

EP032R2+BAC.

EP040R2+BAC.

EP050R2+BAC.

Manufacturer guidance

Characterized control valve with sensor operated flow control, 2-way, Internal and external thread, PN 25 (EPIV):

  • Nominal voltage AC/DC 24 V.
  • Control modulating, communicative, hybrid.
  • For closed cold and warm water systems.
  • For modulating control of air-handling and heating systems on the water side.
  • Communication via BACnet MS/TP, Modbus.
  • RTU, Belimo-MP-Bus or conventional control.
  • Conversion of active sensor signals and switching contacts.

Accessories

FK-CS15.

Guidance for specification option:

Copper Capillary Solder 3/4":

Euroconus union to Capillary solder fittings. Available in

15 and 22 mm pipe sizes. Option available with pre-soldered copper pipe.

FK-CS22.

Guidance for specification option:

Copper Capillary Solder 3/4":

Euroconus union to Capillary solder fittings. Available in

15 and 22 mm pipe sizes. Option available with pre-soldered copper pipe.

FK-CS15.100.

Guidance for specification option:

Copper Capillary Solder 3/4":

Euroconus union to Capillary solder fittings. Available in

15 and 22 mm pipe sizes. Option available with pre-soldered copper pipe.

FK-CS22.100.

Guidance for specification option:

Copper Capillary Solder 3/4":

Euroconus union to Capillary solder fittings. Available in

15 and 22 mm pipe sizes. Option available with pre-soldered copper pipe.

FK-CC15.

Guidance for specification option:

Copper Compression:

3/4" Euroconus union to copper compression fitting,

suitable for diameters 10, 15 and 18 mm.

FK-FUA.

Guidance for specification option:

¾” Flat Face:

Adaptor to convert ¾” Euroconus male ends to ¾” flat face

male, to facilitate the use of flat face fittings.

FK-M04G.

Guidance for specification option:

Male BSP Screwed:

3/4" Euroconus union to male BSP fittings. Available in ½”

and ¾”.

FK-M06G.

Guidance for specification option:

Male BSP Screwed:

3/4" Euroconus union to male BSP fittings. Available in ½”

and ¾”.

FK-F04G.

Guidance for specification option:

Female BSP Screwed:

3/4" Euroconus union to female BSP fittings. Available in

½” and ¾”.

FK-F06G.

Guidance for specification option:

Female BSP Screwed:

3/4" Euroconus union to female BSP fittings. Available in

½” and ¾”.

Manufacturer guidance

Various fitting kits are available to adapt the euroconus ends of the Vortex 4 assembly to different pipe systems. A fitting kit consists of a pair of fittings (flow and return), generally found on both the coil and mains side of the units. Consult manufacturer for details.

FlowRateRange

0.011–0.42.

Guidance for specification option:

Minimum–maximum.

Manufacturer guidance

Venturi size: 3 mm.

Kvs: 2.8.

Assy’ Min ΔP: 25.

Configuration

Left handed.

Right handed.

Horizontal.

Additional 4 port valves.

Sustainability data

Contains Red List materials

Yes

Country of material origin

Italy

Country of product manufacture

United Kingdom

Recyclability

Return to manufacturer or recycle locally

Literature

Pettinaroli VX4ER-0 TDS

Pettinaroli VX4ER-0 TDS

Belimo ePIV - TDS

Belimo ePIV - TDS

Similar products from PETTINAROLI UK LIMITED

83 Range PICV - Pressure Independent Control Valve

83 Range PICV - Pressure Independent Control Valve

92 Range PICV

92 Range PICV

94 Range PICV - Pressure Independent Control Valve

94 Range PICV - Pressure Independent Control Valve

Energy SAVER COMPACT - Kits for Metering

Energy SAVER COMPACT - Kits for Metering

VORTEX 4 PICV Compact Terminal Valve Assembly

VORTEX 4 PICV Compact Terminal Valve Assembly

VORTEX 4 PICV Compact Terminal Valve Assembly (Strainer)

VORTEX 4 PICV Compact Terminal Valve Assembly (Strainer)