Waiting Shelter

The AUTOPA Waiting Shelter range is fully enclosed providing a flexible, permanent covering suitable for a wide variety of sites and uses.

Open Sided Waiting Shelters:

The Badby, Binley, Dodford and Watford shelters are free-standing, open sided shelters designed for on site assembly, constructed from galvanised mild steel. Complete with a 4mm PETG clear sheet roof, and side panels. Front-to-back curved roof.

Features and benefits:

• Full-height UV PETG or galvanised sheeting is used to enclose the strong aluminium frame, protecting occupants from the worst of the weather.
• With a universal design, this waiting shelter is available up to 5 m long, extension bays can be added to achieve the
• desired shelter length making it suitable for use in both commercial and public areas.
• Available flanged only, the AUTOPA Waiting Shelters feature an adjustable foot to make installation easier on uneven surfaces.
• PLEASE NOTE: this shelter does not comply with UK & Irish Smoking regulations.

Installation:

• Supplied in component form for easy installation.
• Flanged shelters must be bolted down onto a concrete surface (no less than 300 mm³) per leg by means of one 10 mm anchor bolt.
• The area surrounding the installation must be flat and level with no nearby surface irregularities or gradient changes.
• On-site assembly requires construction skill.

Open Fronted Waiting Shelters:

The Binley and Watford shelters are free-standing, open fronted shelters designed for on site assembly, constructed from

galvanised mild steel. Complete with a 4mm PETG clear sheet roof, and side panels. Front-to-back curved roof.

Features and benefits:

• Full-height UV PETG or galvanised sheeting is used to enclose the strong aluminium frame, protecting occupants from the worst of the weather.
• With a universal design, this waiting shelter is available up to 5 m long, extension bays can be added to achieve the
• desired shelter length making it suitable for use in both commercial and public areas.
• Available flanged only, the AUTOPA Waiting Shelters feature an adjustable foot to make installation easier on uneven surfaces.
• PLEASE NOTE: this shelter does not comply with UK & Irish Smoking regulations.

Installation:

• Supplied in component form for easy installation.
• Flanged shelters must be bolted down onto a concrete surface (no less than 300 mm³) per leg by means of one 10 mm anchor bolt.
• The area surrounding the installation must be flat and level with no nearby surface irregularities or gradient changes.
• On-site assembly requires construction skill.