Verified by manufacturer 4 months ago
Watco Concrete Floor Paint
Single pack floor paint for light traffic areas. 'Anti Slip' and 'Matt' versions are also available. Pre-mixed, easy to apply, available in 190 RAL colours.
Surface preparation
Priming
Is not usually required, but for very porous high suction surfaces, such as sand and cement screed, use Watco 4 Hour Epoxy Primer. Concrete should be sufficiently porous to allow the paint to penetrate, so very smooth or power floated concrete is unsuitable unless first primed with Watco Powerfloat Primer.
Application
The paint should be thoroughly stirred and must not be thinned. Apply by roller and work well into the surface. Use a paint brush for edges. Avoid applying the paint too thickly. The second coat can be applied as soon as the first coat is dry (generally 16 hours), and should be applied within 5 days. If more than 5 days elapse, the first coat should be lightly abraded before the second coat is applied. Avoid washing the surface for 7 days.
Single pack paint for general use and light traffic concrete floors. Solvent based polyurethane formulation.
All grades now carry CE Mark EN 1504-2 and have impressive test results for abrasion, scratch and impact resistance, as well as for adhesion, hardness and flexibility. All tests have been undertaken to ISO standard where applicable, and demonstrated this ‘Best Ever Formulation’ to be four times more scratch resistant than previously, twice as hard wearing and with 50% improved adhesion.
This attractive, hardwearing coating is easy to apply and dries quickly to provide a low maintenance, tough, oil resistant finish.
Watco Matt Concrete Floor Paint helps to disguise imperfections in older floors and reduce reflection or glare. It’s still easy to keep clean and has all the protective benefits of the gloss finish.
Watco Anti Slip Concrete Floor Paint provides a good level of slip resistance and the anti slip particles are pre-blended which makes it easier to achieve a uniform finish.
Features and benefits:
Areas of use:
Color | Yellow Blue Grey White Red |
Finish | Gloss Matt Anti-slip |
Material | Polyurethane (PUR) |
Shape | Formless |
Length | Bespoke |
Width | Bespoke |
Height | Bespoke |
Uniclass | |
CAWS | M60/180 Floor coating |
Product range |
Colour | Hazard Yellow RAL 1018.Mid Blue RAL 5015.Blue Grey RAL 7000.Dark Grey RAL 7015.Stone RAL 7032.Mid Grey RAL 7037.Light Grey RAL 7038.White RAL 9010.Tile Red. |
Paint finish | Gloss. |
Country of product manufacture | United Kingdom |
Chemi-Coat® Acid Strength
Chemi-Coat® Range
Cold Set Coating
Epoxicote High Build
Epoxicote High Build Anti-slip - 100% solids epoxy resin coating
Epoxicote High Build Rapid
Epoxy Gloss Coat & Epoxy Matt Coat - Two-Part water-based epoxy resin coating
Food Safe Coating
Plant Room Coating
Protecta-Coat Range