NBS Source
I'm a manufacturer

Waterproof Blue: High-Performance DPM for Ultimate Moisture Protection and Waterproofing - Waterproof Flexible Membrane

Verified by manufacturer 2 months ago

Intelligent Membranes

Polymer emulsion that transforms into a waterproof flexible membrane (DPM).

Jump to:
BOS
+44 (0)1223 208174 Website

Application

  • Suitable for waterproofing of concrete and cement based surfaces in showers, bathrooms, steam areas and wet rooms that require waterproofing prior to tiling.
  • Suitable for internal and external use – spray, roll or brush applied DPC/ DPM.


Suitable Substrates:

Ideal for the waterproofing of concrete, bricks and cement based surfaces in showers, bathrooms, steam areas and wet rooms that need waterproofing prior to tiling.


Application:

  • STEP 1 – Fill the joints between the surface, and the draining and tubes with a paintable waterproof sealant. When these joints are < 5mm, enlarge these
  • before applying the sealant.
  • STEP 2 – Apply the Waterproof Blue, waterproof paint membrane with a longhaired roller, paintbrush or airless paint spray machine in two coats. Coverage in 2 layers is minimal 800gr/m², or 2 layers of approx. 400 gr/m² depending on the roughness of the substrate. Second layer to be applied crosswise on the first layer, when the first layer has dried out. Make sure to check for complete coverage.
  • STEP 3 –When the second layer of Waterproof Blue, water proof paint membrane has dried out (24 to 48 hours after application), apply tiling as finishing. Suitable tiling glues include: cement glue class C2 or dispersion glue class D2TE, according EN12004.

Description

Waterproof Blue is a one-product-solution for the waterproofing prior to tiling in bathrooms, wet-rooms and concrete floors. The waterproof paint membrane dries to a flexible membrane solution with high crack bridging properties. Application with roller, paintbrush or airless spray gun is advised. No corner reinforcements needed.


One-product-solution for the waterproofing prior to tiling in bathrooms and wetrooms, including base damp proofing and the use as a DPM. The liquid DPM coating dries to a flexible membrane with high crack-bridging properties, airtight values and adhesion.


Features and benefits:

  • One product solution for complete waterproofing.
  • Spray, brush and roll applied.
  • No corner reinforcements required.

General information

Color

Blue

Finish

Anti-slip

Guidance for specification option:

Slight rubber like polymer coating

Material

Polymer

Guidance for specification option:

Polymer emulsion, liquid DPM.

Shape

Formless

Guidance for specification option:

Liquid.

Length

Bespoke

Width

Bespoke

Height

Bespoke

Warranty description

25 year

Uniclass

Pr_25_57_65_60 Plastics sheetsPrimary
Ss_32_20_30_15 Cold-applied liquid floor damp-proofing systems
Ss_32_80_03_14 Cold-applied liquid waterproofing systems

CAWS

J31/353 Waterproof coating

J30/130 Cold-applied damp-proofing

J40/345 Cold-applied bonding compounds

Q26/230 In situ polymeric surfacing

J30/10 Cold-applied damp-proofing

Product range

Waterproofing Paint

Specification data - Plastics sheets

Material

Polymer emulsion.

Purpose

Damp-proof membrane.

Performance characteristics

-

Elongation to break

>250%.

Guidance for specification option:

To DIN 53504.

Physical properties

-

Colour

Blue.

Class

Emulsion M1.

Application temperature

>5°C.

Components

Suitable tiling glues: Cement glue class C2 or dispersion glue class D2TE, according EN12004.

Density

1.2 kg/L.

Solids

60%.

Application rate

0.8 kg/m² (minimum consumption, substrate dependent).

PHLevel

9.0.

VOC emissions

<5 ppm.

Adhesion strength

Red brick Porotherm: 1.6 N/mm², Concrete brick: 1.4 N/mm², Sand cement screed: 1.3 N/mm², Concrete tile: 1.6 N/mm², Ytong Brick: 1.0 N/mm².

Manufacturer guidance

To ISO 4624: 2016.

Water absorption

2.14 to 5.27 g.

Guidance for specification option:

Normal: <20 g.

Manufacturer guidance

To NBN EN 14981, Part A7.

Crack bridging

>3.5 mm.

Manufacturer guidance

To NBN EN 14981.

Watertightness

Watertight and water impermeable to NBN EN 14891 part A7.

Sustainability data

Contains Red List materials

No

Country of material origin

Europe

Country of product manufacture

Europe

Material

Polymer

Guidance for specification option:

Polymer emulsion, liquid DPM.

Recyclability

Not recyclable due to its adhesion to other products

Manufacturer guidance

Recyclable as a solid content. Consult manufacturer for details.

Recycled content

As defined in clause 7.8 of BS EN ISO 14021

0 %

BIM objects

BOS

NBS BIM Object Standard

This BIM object has been authored to meet the requirements of the NBS BIM Object Standard.

Find out more about the NBS BIM Object Standard.

Platform Compatible Version
Revit
-

1

IFC
-

1

Literature

Waterproof Blue DPM Install guide

Waterproof Blue DPM Install guide

Waterproof Blue DPM Technical Data Sheets

Waterproof Blue DPM Technical Data Sheets

Waterproof Blue Liquid DPM - Impermeability

Waterproof Blue Liquid DPM - Impermeability