Compare

weberfloor bonded system

Name: weberfloor bonded system
Brand: Saint-Gobain Weber
SKU: rsYHVTogvr16o3Si2Uet77

Verified by manufacturer 5 months ago

Saint-Gobain Weber

Third party certifications:

EPD
Certificate type
ISO 45001 Health and Safety Management
Certificate type
ISO 9001 Quality Management
Certificate type

Bonded flooring system designed to level and smooth substrates finished with floor coverings such as vinyl, laminate, carpet or tiles.

Jump to:

+44 (0)1525 718877 Website

Application

If substrate is in need of repair please see weberfloor substrate repair system
Cannot be used on external projects
Substrate must have a pulloff strength ≥1.0MPa
Consideration should be given to the requirements of the final floor finish when deciding if weberfloor MVS or weberfloor DPM is required

Description

weberfloor bonded system provides a solution to level and smooth a substrate with up to 98% relative humidity prior to the application of a final floor finish. Suitable for depths as low as 5mm and up to 50mm, this system can be tiled in as little as 2 hours or covered with a moisture sensitive final floor finish in as little as 16 hours.

Features and benefits:

Suitable for concrete, cementitious or anhydrite substrates
Provides an ultra smooth surface, perfect for final floor finishes
System can be applied at as little as 5mm and up to 50mm
Foot traffic after 2 hours
Can be covered in as little as 16 hours
Pump or hand applied
Compatible with weberfloor 4716 acrylic primer
Compatible with moisture control systems that allow application up to 98% relative humidity

General information

Color	Grey Other
Finish	Other Guidance for specification option: Finished with floor coverings such as laminate, vinyl, carpet or tiles.
Material	Cementitious Other
Shape	Formless

Uniclass	Ss_30_42_15_10 Bonded or partially bonded cementitious levelling screed systemsPrimary
CAWS	M41/110 Terrazzo tiling M40/110 Tiling to M40/5 Tiling to M50/130 Carpet tiling M50/15 Carpet tiling K21/10 Wood laminate flooring K21/145 Composite laminate flooring K21/115 Wood laminate flooring K21/146 Laminate flooring M10/3 Bonded cement:sand levelling screeds M10/110 Bonded cement:sand levelling screeds

Product range	Flooring solutions / Bonded solutions

Specification data - Bonded or partially bonded cementitious levelling screed systems

Preparation	Preparation of substrate for fully bonded construction.
Bonding coat	Guidance for specification option: Consult manufacturer and insert requirements or omit.
Reinforcement for crack control	Guidance for specification option: Consult manufacturer and insert requirements or omit.
Screed	Self-smoothing levelling screed mixes. Guidance for specification option: weberfloor fibre 4310. Self-smoothing base and renovation screed. weberfloor fibre 4310 is a pump or hand applied, self-smoothing, fibre-reinforced base or renovation screed for floors, with Low Dust TechnologyTM, which gives a strong base layer for receiving tiles or a thin topping screed. The product is formulated from special cements, aggregates and chemical admixtures.
Surface treatment	Guidance for specification option: Consult manufacturer and insert requirements or omit.
Accessories	Guidance for specification option: Consult manufacturer and insert requirements or omit.

Primer	Not required. Styrene acrylate primer. Guidance for specification option: weberfloor 4716 (optional). For use if no moisture control system is used and if weberfloor DPM is used. Regulates the porosity of the substrate and improves adhesion. weberfloor 4716 primer is a styrene acrylate dispersion which can be diluted with water and is intended for use with Weber’s flooring products.
Moisture control layer	Not required. Water-based moisture vapour suppressant. Guidance for specification option: weberfloor MVS (optional). Use to reduce the passage of residual construction moisture up to 95% relative humidity.
Drying time	Two hours (foot traffic); 16+ hours (floor covering).
Floor covering	Guidance for specification option: Finished with floor coverings such as laminate, vinyl, carpet or tiles. Consult manufacturer and insert requirements.