Compare

White Solar Reflective TPE Membrane - IKO Spectraplan Ballasted Roofing System - Single Ply Roof

Name: White Solar Reflective TPE Membrane - IKO Spectraplan Ballasted Roofing System - Single Ply Roof
Brand: IKO Ireland
SKU: 7YpmRTqarNX7MmVHfKqUVU

Verified by manufacturer 1 month ago

IKO Ireland

Third party certifications:

ISO 9001 Quality Management
Certificate type
ISO 45001 Health and Safety Management
Certificate type

Single ply ballasted roof covering system.

Jump to:

+353 1 88 55 090 Website

Application

Suitable for ballasted roofing applications.
New build and refurbishment installations.

Description

IKO Spectraplan ballasted systems can be installed over most substrates, including timber and profiled steel. They can be used as the roofing system for flat roof projects and are suitable for both new builds and refurbishments. Overlaps in the IKO Spectraplan SM membrane are mechanically fastened by using IKOfix Thermally Broken Washers and IKOfix fixings into the deck. They are then hot air welded. The systems can include a wide range of finishes, including a variety of ballasts, concrete loading coats, and more.

Key benefits to your project

BBA Approved (Certificate No. 05/4203).
Classified to achieve BROOF(t4) following EN 13501-5 to enable compliance with Part B of the Building Regulations.
UV resistance and long service life.
Secure seam welding quality.
Overlaps sealed at a broad range of welding temperatures.
Chemical resistance.
Compatible with existing bitumen membranes, without the need for a separation layer.
IKOfix fastenings ensure resistance to wind uplift.
Aesthetically pleasing white finish.
Easy to clean and repair.

General information

Color	White
Material	Thermoplastic elastomer (TPE)
Length	Bespoke
Width	Bespoke
Height	Bespoke
Warranty description	20 year

Uniclass	Ss_30_40_30_80 Single layer sheet warm roof covering systemsPrimary
CAWS	J42/10 Warm deck roof covering J42/110 Warm deck roof covering

Specification data - Single layer sheet warm roof covering systems

System performance	- Manufacturer guidance Consult manufacturer and insert requirements.
Air and vapour control layer	-
Type	IKO Spectravap vapour control layer. Guidance for specification option: IKO Spectravap is a 0.3 mm thick, loose laid polyethylene vapour control layer (VCL), suitable for use on most IKO Polymeric mechanically fastened systems.
Attachment	Loose laid with 150 mm side and end laps taped with Spectravap jointing tape.
Insulation	-
Type	IKO enertherm Gold Insulation, 2400 x 1200 mm. Guidance for specification option: Thickness: 40, 50, 60, 80, 100, 120, 140, 150, 160, 180, 200 mm. Consult literature and insert requirements.
Waterproof covering	-
Type	IKO Spectraplan SM. Guidance for specification option: A 1.2 mm thick, polyester scrim reinforced TPE membrane.
Attachment	Mechanically fastened.
Joints	Hot air welded.
Surface protection	Ballast. Guidance for specification option: Suitable for a variety of ballasts. Consult manufacturer and insert requirements. Concrete loading coats. Paving support pads.
System accessories	Not required. IKO Adjustable Leafguards. IKO TPE Stainless Steel Outlets. IKO Strike Spectraplan Lightning Conductor Clips. IKO TPE Coated Metal. IKO TPE Rainwater Outlets. Bond & Seal Mastic. Manufacturer guidance Refer to the BBA Agrément Certificate and manufacturer's literature for details.

Detailing/ Vertical work	Detailing: IKO Spectraplan D adhered with Spectraplan TPE Contact Adhesive. Manufacturer guidance Spectraplan D is a 1.2 mm thick thermoplastic elastomer (TPE) membrane which is unreinforced and pliable for intricate detailing.
Weight	1300 g/m². Guidance for specification option: This value relates to the Spectraplan SM membrane.
TensileStrength	≥ 1000 N/50 mm. Guidance for specification option: This value relates to the Spectraplan SM membrane.
Elongation at break	≥ 15%. Guidance for specification option: This value relates to the Spectraplan SM membrane.
Tear resistance	≥ 150 N. Guidance for specification option: This value relates to the Spectraplan SM membrane.
ShearStrength	≥ 1000 N. Guidance for specification option: This value relates to the Spectraplan SM membrane. Manufacturer guidance Shear strength of joints.
Impact resistance	≥ 1100 mm soft; ≥ 450 mm hard. Guidance for specification option: This value relates to the Spectraplan SM membrane.
Static load resistance	≥ 20 kg. Guidance for specification option: This value relates to the Spectraplan SM membrane.
Dimensional stability	≤ 1.0%. Guidance for specification option: This value relates to the Spectraplan SM membrane.
Flexibility at low temperature	≤ -35°C. Guidance for specification option: This value relates to the Spectraplan SM membrane.
Third-party certification	BBA Agrément Certificate No. 05/4203.

Sustainability data

Contains Red List materials	Yes
Country of product manufacture	United Kingdom
Material	Thermoplastic elastomer (TPE)
Manufacturing plant location	Clay Cross, Chesterfield, UK
Embodied carbon A1-A3 (production stage) as defined in BS EN 15804	2.64 kg CO₂ eq/m² Self declared
Recyclability	The membrane is manufactured from TPE and polyester, which can be recycled.