A specially formulated combination of high quality bitumen, synthetic rubbers, lightweight fillers and other additives, which is hot-applied with carefully selected reinforcement fabrics and protection layers to give a monolithic waterproofing system. ShieldTEC Warm Roof Hotmelt system achieves a Broof (T4) reaction to fire without the need for additional fire resistant coverings allowing for a light weight fire resistant system.

Components:

ShieldPRIME - A brush or roller applied bituminous priming solution for the preparation of cementitious surfaces to receive ShieldTEC monolithic membrane.
ShieldTEC PS2 - A vapour control membrane with a nominal mass of 2 kg/m².
Suitable Shield insulation.
ShieldTEC Monolithic Hot Melt - A hot applied specially formulated combination of refined polymer-modified bitumen, synthetic rubbers, fillers and other additives.
ShieldTEC PS2 - VCL, ShieldTEC PS4 - Underlay or ShieldTEC PS5 - Mineral cap sheet or ShieldROOT M - Root resistant protection membrane.

Features and benefits:

Hot applied system.
Broof (T4) without additional coverings
Suitable for completely flat (zero falls) decks.
BBA Certified No. 20/5793
Outstanding durability – lasts the life of the building.
Tough and resistant to impact damage.
High bond strength to substrate and insulation
High tensile strength.
Monolithic application.
Rapid setting
Resistant to rain, snow and frost immediately after application.
Fully bonded system – Non-tracking.

20/5793 ShieldTEC Warm Roof Hotmelt System