WeatherClad® is a wood effect autoclaved, cellulose fibre reinforced cement siding board manufactured from Portland cement, cellulose fibres, finely ground sand and water. Available in a range of colours and wood stains.

Features and benefits:

Natural timber appearance with embossed grain finish, pre-decorated paint and woodstains.
A2-s1,d0 reaction to fire according to BS EN 13501-1: 2018.
Weather resistant.
Split pallets available.
Easy to install and low maintenance.
Range of colour matched profiles and trims available.

Installation:

Install WeatherClad® with a minimum 15 mm ventilated cavity to reverse of planks.
Timber battens should have a minimum dimension of 15 mm deep x 50 mm wide and be positioned at maximum span of 600 mm.
Fixings are generally concealed, as planks should overlap by approximately 30 mm to the plank below.
These principles ensure that the system is ventilated to reduce the risk of moisture penetration into the building.

BDA Weatherclad BAW-20-140-P-A-UK