Summary

Bolton Gate offer a complete range of Security Rated options from SR1 through to SR5 rating.

The latest addition to our portfolio, are the SecRoll Security Roller Shutters offering A1, B3 & C5 security classifications equivalent to SR1, SR2 & SR3 respectively.

Providing a choice of ratings, these bespoke high security rolling shutters manufactured here in the UK are designed to provide flexibility for our Clients with a wide range of opening sizes and specification options including thermal and acoustic capabilities.

We are proud to confirm that our security shutters are registered in the BRE Global ‘Red Book Live’ confirming our products have been rigorously tested, assessed and approved by LPCB (Loss Prevention Certification Board) and that also the same high standard and quality production is maintained through the process of regular audits.

C5 Rated SecRoll SR3

Operation

Tubular Motor

· To suit 230-volt nominal, 1 phase supply.

· External safety brake.

· Low level keyswitch

Direct Drive Motor

· To suit 400-volt nominal, 3 phase supply

· Integrated safety brake.

· Open, close, stop push buttons within low level control panel.

Arrangement

Internally face fixed to brick, block, concrete or steel (i.e. rigid structures).

Locking

A pair of side guide mounted pin locks are provided.

Over 3500mm clear width, a centrally mounted ground lock (complete with padlock) is also provided (2no if >7000mm).

Size Parameters

Minimum 1m wide x 1m high

Maximum 10m wide x 10m high (Direct drive motor)

7m wide x 4m high (Tube motor)

Weight

Varies with opening size dependent on lath/barrel/casing requirements but approximately 45kgs/m².

B3 Rated SecRoll SR2

Operation

Tubular Motor

· To suit 230-volt nominal, 1 phase supply.

· External safety brake.

· Low level keyswitch

Direct Drive Motor

· To suit 400-volt nominal, 3 phase supply

· Integrated safety brake.

· Open, close, stop push buttons within low level control panel

Arrangement

Internally face fixed to timber, brick, block, concrete or steel (i.e. flexible and rigid structures).

Locking

A pair of side guide mounted pin locks are provided.

Over 5000mm clear width, a centrally mounted ground lock (complete with padlock) is also provided.

Size Parameters

Minimum 1m wide x 1m high

Maximum 7m wide x 7m high (Direct drive motor)

7m wide x 4m high (Tube motor)

Weight

Varies with opening size dependent on lath/barrel/casing requirements but approximately 45kgs/m².

C1 Rated SecRoll SR1

Operation

Tubular Motor

· To suit 230-volt nominal, 1 phase supply.

· External safety brake.

· Low level keyswitch

Direct Drive Motor

· To suit 400-volt nominal, 3 phase supply

· Integrated safety brake.

· Open, close, stop push buttons within low level control panel.

Arrangement

Internally face fixed to timber, brick, block, concrete or steel (i.e. flexible and rigid structures).

Locking

A pair of side guide mounted pin locks are provided.

Size Parameters

Minimum 1m wide x 1m high

Maximum 7m wide x 7m high (Direct drive motor)

7m wide x 4m high (Tube motor)

Weight

Varies with opening size dependent on lath/barrel/casing requirements but approximately 45kgs/m².

Constructionline Gold