MultiTX Plus is a high vapour resistance air and liquid barrier roofing underlay. It is durable, clean, easy to cut and install, and offers temporary protection against wind driven rain, snow and dust.

Features and benefits:

MultiTX Plus conforms to the Construction Products Regulation (EU Regulation No. 305/2011), Underlay for discontinuous roofing (Annex ZA of EN 13859-1) and is manufactured under control of an ISO 9001 quality management system.
BBA certified.

Rolls should be stored flat on a clean, level surface and kept under cover. Once the underlay is applied to the roof, the primary roof covering should be installed within one month.

Method of installation:

The membrane should be installed as detailed in national building regulations and relevant agreement certification for this product. The membrane should be unrolled across the roof colour side up and draped a minimum of 150 mm onto the proprietary eaves carrier. The membrane should be fixed to the rafters or boarded sarking, subsequent rows should be lapped by 150 mm to shed water out and down the slope. Adjacent rolls should be lapped by 100 mm.

Don & Low Multi TX