Anomatch architectural powders have been specially designed to represent architectural anodizing on both aluminium and galvanized steel. Anomatch creates a finish that enhances the metal with a soft, lustrous sheen.

Anodized aluminium has a reputation for its 'living' quality, with a natural metallic radiance. Anomatch creates the same effect with additional benefits.

Features and benefits:

Range of over 20 colours, bronze, silver, gold and blue/grey.
Long guarantees – up to 40 years.
Low maintenance
Can be repaired on site or off-site.
A faster turn around and lower cost than anodising.
Excellent weather resistance, excellent mechanical properties
Colour stability
Flexible coating which can be drilled, cut and sawn without fracturing the coating,
Does not require expensive, high grade, anodizing quality aluminium.
A homogenous and consistent finish across different batches of metal.
A homogenous and consistent finish on adjoining material.
Colour consistency finish across welded joints.
Steel can be chosen for its strength - and coated to appear anodized.
Qualicoat Class 1 or class 2 approved powder products.
All Anomatch finishes and application conform to BS EN 12206-1. Powder coating on aluminium.
All Anomatch finishes and application conform to BS EN 13438: 2013. Powder coating on galvanized steel.
Resistance to boiling water: no blistering and no loss of adhesion.
Cylindrical mandrel bending: To ISO 1519, 5 mm mandrel, no cracking or detachment.

EPD guide