Cementitious coating for the waterproofing and protection of concrete and masonry. Can be spray-applied so ideal for large projects. Suited to the waterproofing of reservoirs, tunnels, water tanks, basements, podium decks, flat roofs and balconies.

Features and benefits:

Pre-packaged materials easily mixed on site.
Tough, flexible coating which maintains its elastomeric properties even under immersed conditions to accommodate movement in cracks.
Good abrasion and very high resistance to freeze/ thaw cycles and de-icing salts.
Excellent adhesion to sound prepared concrete and masonry substrates, as well as steel.
Dense matrix offers low permeability to water, even at 10 bar pressure, and very high diffusion resistance to carbon dioxide gas.
Suitable for positive and negative waterproofing of earth-retaining structures as well as covered decks.
A 2 mm coat provides the equivalent to 135 mm of good quality concrete cover.
Can be applied to damp substrates in temperatures down to 5°C.
Water-based product, free from hazardous solvents, ideal for use in confined spaces. Non-toxic when cured.
Correctly prepared suitable substrates include concrete of at least 20 kN, steel, masonry and screed.
Can be applied via squeegee, roller, airless spray, pin leveller, brush or trowel.
CE marked and manufactured in accordance with EN 1504-2: 2004.
Guaranteed to resist weathering for up to ten years.

Curing:

Ready for next coat: At 5°C: After 8 hours; at 10°C: After 7 hours; at 15°C: After 6 hours; at 20°C: After 5 hours; at 25°C: After 3 hours.
To be kept rain-free: At 5°C: For 5 hours; at 10°C: For 4 hours; at 15°C: For 3 hours; at 20°C: For 2.5 hours; at 25°C: For 2 hours.
Ready for temporary traffic/ protection boards: At 5°C: After 72 hours; at 10°C: After 72 hours; at 15°C: After 72 hours; at 20°C: After 48 hours; at 25°C: After 48 hours.
Ready for flood/ hosepipe test: After 7 days (at all temperatures).
Fully cured: After 28 days (at all temperatures).

Newton HydroCoat 107 Elastic 2K