Verified by manufacturer over a year ago
COLORBOND® Steel
Wall cladding system with a flat, recessed joint look.
Suitable for wall cladding applications that require a flat, recessed look.
AUSTRALIAN STANDARDS
Published load capacity data is derived from testing in accordance with:
Published Limit state capacities are suitable to determine structural adequacy and serviceability in accordance with:
Published installation guidelines align with AS 1562.1:2018 Design and Installation of sheet and wall cladding.
Fielders steel products comply with:
Boulevard™ is a wall cladding system with a flat, recessed joint look achieved through interlocking panels that are pierce-fixed and installed with a ventilated air space. Some features of this system include:
Material | Steel. |
Shape | Rectangle |
Warranty description | Manufacturer guidanceProject specific material warranties available. Contact manufacturer for details. |
Uniclass | |
SpeedSpec | 07462 Cladding External Walls |
NATSPEC National Classification System | 0436 Cladding – Profiled and Seamed Sheet Metal |
SpecPack | 07600 Metal Roofing, Siding and Roof Plumbing |
Standards | To AS 1397, AS/NZS 1365 and AS/NZS 2728.Guidance for specification option: Installation of the cladding should be in accordance with AS 1562.1 and HB 39. |
Structural grade | G300. |
Coating | |
Class | AM100. |
Size | |
Length | Manufacturer guidanceSheets are supplied custom cut to length to suit project requirements. Transportation limits apply. Panels come in lengths of 0.50 m to 8.0 m, with longitudinal joint widths of 5 mm to 18 mm (with 15 mm as standard). Provide manufacturing tolerance of ±7 mm in length. |
Width | 285 mm.485 mm.Manufacturer guidanceComes with a side depth of 22 mm. Provide manufacturing tolerance of ±4 mm in cover width. Other widths are available, subject to minimum order quantity. Contact local manufacturer for details. |
Thickness | 0.55 mm.Guidance for specification option: Total Coated Thickness of 0.60 mm. 0.75 mm.Guidance for specification option: Total Coated Thickness of 0.80 mm. Subject to minimum order quantities. Manufacturer guidanceRefers to Base Metal Thickness or BMT. Indicated Total Coated Thickness (TCT) is based on standard COLORBOND®, single-sided material. |
Finish | |
Applied | Painted. |
Colour | Basalt. Classic Cream. Cottage Green. Cove. Deep Ocean. |
Material | COLORBOND® steel. |
Cyclonic performance | To AS/NZS 1170.2:2011, AS 4040.1:1992, AS 4040.3:2018 and AS 4055:2012. |
Thermal expansion | 2.9 mm average per 5.0 m. Manufacturer guidanceComputed at 50° C change. |
Frame or support | Plywood. Guidance for specification option: To be supported with purlins of minimum 1.00 mm BMT G550, with maximum spans of 600 mm. Affix with 10g-16 x 25 mm Wafer or Low Profile Hex Head Type 17 screws with a minimum class 3 coating. Steel Batten. Guidance for specification option: Steel battens should be 40 mm x 0.75 mm BMT G550, with maximum spans of 450 mm. This is to be supported with purlins of minimum 1.00 mm BMT G550, with maximum spans of 1500 mm. Affix with 10g-16 x 16 mm Wafer or Low Profile Hex Head Tek screws with a minimum class 3 coating. KingFlor® KF40®. Guidance for specification option: For resistance to wind-borne debris, KF40 backing is required. KF40 should be 0.75 mm BMT, to be supported by wall girts of 1200 mm maximum spans. If panels are to be installed vertically, steel battens with 1200 mm maximum spans should be added. Affix with 10g-16 x 16 mm Wafer Head Tek screws through both over and under lap legs. Manufacturer guidanceRefers to recommended substrate and fasteners if product is to be installed without insulation. |
Mass | 5.31 – 5.92 kg/m² (0.55 mm BMT). 6.71 – 7.47 kg/m² (0.75 mm BMT). |
Insulation | Manufacturer guidanceWhen insulation thickness up to 50 mm are installed, screws may need to be increased in number depending on insulation thickness and density. When insulation is required, Fielders® recommends the use of a thermal spacer. |
Installation | Concealed pierced-fixed. Manufacturer guidanceBoulevard™ needs to be fitted on a water tight barrier, which may consist of a precast wall, steel sheeting backing (such as Panelform™) or another waterproof membrane. Fielders® recommends the use of Panelform™. |
Country of material origin | Australia |
Country of product manufacture | Australia |
Recyclability | 100% Recyclable. |