NBS Source
I'm a manufacturer
Compare variants

Panelform™ Non-Cyclonic (COLORBOND® Steel)

Verified by manufacturer over a year ago

COLORBOND® Steel

Fielders Variant:

Walling and ceiling profile. Available in NSW and VIC only.

Jump to:
+61 8 8292 3611 Website

Application

Suitable as walling and ceiling option for a variety of applications. Available in New South Wales and Victoria only.


AUSTRALIAN STANDARDS

 

Published load capacity data is derived from testing in accordance with:

  •       AS 4040.0:1992.
  •       AS 4040.1:1992.
  •       AS 4040.2:1992.
  •       AS 4040.3:2018.

 

Published Limit state capacities are suitable to determine structural adequacy and serviceability in accordance with:

  •       AS/NZS 1170.0:2002 Structural design actions, Part 0: General principles.
  •       AS/NZS 1170.1:2002 (Reconfirmed 2016) Structural design actions, Part 1: Permanent, imposed and other actions.
  •       AS/NZS 1170.2:2011 (Reconfirmed 2016) Structural design actions, Part 2: Wind actions.
  •       AS/NZS 1170.3:2011 (Reconfirmed 2016) Structural design actions, Part 3: Snow and ice actions.

 

Published installation guidelines align with AS 1562.1:2018 Design and Installation of sheet and wall cladding.

 

Fielders steel products comply with:

  •       AS 1397:2011 Continuous hot-dip metallic coated steel sheet and strip - Coatings of zinc and zinc alloyed with aluminium and magnesium.
  •       AS/NZS 2728:2013 Prefinished/prepainted sheet metal products for interior/exterior building applications - Performance requirements.
  •       AS 1397:2011 which defines the coating types and classes and steel grades for hot dip metallic coated steel.

Description

Panelform™ is a walling and ceiling profile with maximum flexibility, thereby offering more design freedom. Some of its features include:

  • Low-profile and highly durable walling and ceiling option.
  • Easily trimmed and fitted with matching capping.
  • Available in a range of colours and finishes.

General information

Material

Steel.

Shape

Rectangle

Warranty description

-

Manufacturer guidance

Covered by BlueScope material warranties, subject to project assessment and terms and conditions.

Uniclass

Pr_25_71_51_89 Steel profiled sheetPrimary

SpeedSpec

07610 Roofing and Roof Plumbing

07462 Cladding External Walls

NATSPEC National Classification System

0436 Cladding – Profiled and Seamed Sheet Metal

0423 Roofing – Profiled Sheet Metal

SpecPack

07600 Metal Roofing, Siding and Roof Plumbing

Specification data - Steel profiled sheet

Standards

To AS 1397 and AS/NZS 2728.

Guidance for specification option:

Installation of the cladding should be in accordance with AS 1562.1 and HB 39.

Grade

G550.

Coating class

AM100.

Base Metal thickness (BMT)

0.35 mm.

0.42 mm.

Profile

-

Form

Trapezoidal.

Height

4 mm.

Manufacturer guidance

Refers to rib height.

Cover width

850 mm.

Manufacturer guidance

Provide manufacturing tolerance of ±2 mm.

Colour

Basalt.

Classic Cream.

Cottage Green.

Cove.

Deep Ocean.

Dune.

Evening Haze.

Gully.

Ironstone.

Jasper.

Mangrove.

Manor Red.

Monument.

Night Sky.

Pale Eucalypt.

Paperbark.

Shale Grey.

Surfmist.

Terrain.

Wallaby.

Windspray.

Woodland Grey.

Finish

Painted.

Solar absorptance value (maximum)

0.32–0.96.

Manufacturer guidance

Value is dependant on colour. Contact manufacturer for further assistance.

Material

COLORBOND® steel.

Length

-

Manufacturer guidance

Sheets are supplied custom cut to length to suit project requirements. Transportation limits apply.


To address thermal expansion and contraction, the recommended maximum sheet length is 15 m for walling and 24 m for roofing.


Provide manufacturing tolerance of ±15 mm.

Span

-

Manufacturer guidance

Refers to maximum allowable spans. These vary depending on base metal thickness and span type.

  • 0.35 mm BMT walling: 1100 mm for single span and 1200 mm for end span and internal span.
  • 0.42 mm BMT walling: 1200 mm for single span, end span and internal span.

Frame or support

Steel (1.0 to 3.5 mm).

Guidance for specification option:

  • For valley fixing (wall only), use 10-16 x 16 mm Metal Teks Hex Head or 10-16 x 25 mm Designer Head screws.
  • If side lap fixing is necessary, use 3.2 mm sealed aluminium blind rivet.

Timber Hardwood and Softwood.

Guidance for specification option:

  • For valley fixing (wall only), use 10-12 x 25 mm Type 17 Hex Head or 10-16 x 25 mm Designer Head screws.
  • If side lap fixing is necessary, use 3.2 mm sealed aluminium blind rivet.

Manufacturer guidance

Refers to recommended fixing supports and fasteners. Can be installed with either four or eight fasteners for walling applications.

Mass

3.19 – 3.22 kg/m² (0.35 mm BMT).

3.80 – 3.83 kg/m² (0.42 mm BMT).

Installation

Pierced-fixed.

Sustainability data

Country of material origin

Australia

Country of product manufacture

Australia

Recyclability

100% Recyclable.

Similar products from Fielders

ARAMAX® (COLORBOND® Steel)

ARAMAX® (COLORBOND® Steel)

CorroMax 21® Non-Cyclonic

CorroMax 21® Non-Cyclonic

CorroMax 35® Non-Cyclonic

CorroMax 35® Non-Cyclonic

FreeForm® (COLORBOND® Steel)

FreeForm® (COLORBOND® Steel)

HiKlip® 630 Cyclonic

HiKlip® 630 Cyclonic

HiKlip® 630 Non-Cyclonic

HiKlip® 630 Non-Cyclonic

HiRib™ 680 Cyclonic

HiRib™ 680 Cyclonic

HiRib™ 680 Non-Cyclonic

HiRib™ 680 Non-Cyclonic

KingKlip® 700 Cyclonic

KingKlip® 700 Cyclonic

KingKlip® 700 Non-Cyclonic

KingKlip® 700 Non-Cyclonic