Verified by manufacturer over a year ago
Rockcote Quick Render Fibre Reinforced is a fibre reinforced render, designed for high strength, crack resistance and low shrinkage.
Rockcote Quick Render Fibre Reinforced (FR) render is designed for a medium to fine render finish. Suitable for use where builds of 2-10 mm are required in a single application. Rockcote Quick Render products should always be used as part of a full Rockcote system specification.
AAC 75 mm Panel (Painted Render System)
Step 1. Rockcote Rockbond 27
Step 2. Rockcote Quick Render Fibre Reinforced (FR)
Step 3. Rockcote Masonry Primer Hi Op
Step 4. Rockcote Armour
Step 5. Rockcote Armour
Off Form Concrete & Masonry (Premium Texture System)
Step 1. Rockcote High Adhesion Primer
Step 2. Rockcote Quick Render Fibre Reinforced (FR)
Step 3. Rockcote Texprime
Step 4. Rockcote Sandcote Hydratech
AAC 75 mm Panel (Concrete Finish Look)
Step 1. Rockcote Bond 27
Step 2. Rockcote Quick Render Fibre Reinforced (FR)
Step 3. Rockcote Polymer Render Grey
Step 4. Rockcote Cerano
Step 5. Rockcote Cerano
Step 6. Rockcote Clearcote/Repel
Quick Render Fibre Reinforced (FR) is a fibre reinforced render, designed for high strength, crack resistance and low shrinkage. Properly cured, Quick Render FR exhibits minimal drying shrinkage and is a reliable surface for over-coating with acrylic textures and paints. Quick Render FR is specifically designed for AAC (Autoclaved Aerated Concrete) substrates and can also be used as a sponge finished render. Some of its significant features include:
Size | Manufacturer guidance20 kgs pack. |
Warranty description | Manufacturer guidanceUp to 15 year* warranty when applied as part of a full Rockcote coating system. * Depending on substrate and finish. |
Uniclass | |
NATSPEC National Classification System | 0611a Rendering and Plastering – Cement Render 0611 Rendering and Plastering |
SpeedSpec | 09210 Cement Render |
SpecPack | 09210 Cement Render |
Cement | General purpose (GP) cement. |
Sand | Fine - Medium. |
Additives | Fibre reinforced. |
Colour | Off white. |
Execution | Trowel.Spray. |
Dry film thickness | 2-10 mm. |
Number of coats | 1 coat. Guidance for specification option: Depending on substrate and method of application. |
Drying time | 48-72 hours (full curing). Manufacturer guidanceDries in approximately 8 hours under normal drying conditions. (Dry times vary with changes in temperature and humidity and residual moisture in the substrate). |
Substrates | AAC blocks and panels. Block. Brick. Concrete. Tilt up panels. |
Contains Red List materials | No |
Country of material origin | Australia |
Country of product manufacture | Australia |