NBS Source
I'm a manufacturer

Rockcote Quick Render PM100 High Build

Verified by manufacturer over a year ago

Rockcote

A pre-blended polymer-modified cement render.

Jump to:
1300 736 668 Website

Application

  • Quick Render PM100 High Build adheres well to standard and difficult masonry substrates such as bricks, concrete blocks, AAC panel, off-form concrete and specified lightweight building substrates, such as core filled fibre cement sheet when properly prepared.
  • Suitable for interior and exterior use.


Rockcote Quick Render PM100 High Build is designed for a medium grade, rendered finish. Rockcote Quick Render products should always be used as part of a full Rockcote system specification. 



Description

Quick Render PM100 High Build is a pre-blended polymer-modified cement render. Quick Render PM100 High Build is simple to mix and easy to apply and finish. PM100 High Build has been formulated to build up and level undulating clay and cement block masonry. Can be built out to 30mm. Some of its significant features include:

  • Easy to use.
  • Water repellent.
  • Excellent adhesion to properly prepared substrates.
  • Acrybond not required, just add water.
  • Manufactured with low density materials.
  • Insulative properties.
  • Fibre reinforced.
  • Lighter in weight than standard renders.
  • Ideal levelling base coat before the application of Rockcote Coloured Renders and textures.

General information

Size

-

Manufacturer guidance

12 kgs pack.

Warranty description

-

Manufacturer guidance

Up to 15 year* warranty when applied as part of a full Rockcote coating system.

* Depending on substrate and finish. 

Uniclass

Pr_35_31_64_65 Polymer-modified rendersPrimary
Pr_35_31_64_12 Cementitious renders

NATSPEC National Classification System

0611a Rendering and Plastering – Cement Render

0611 Rendering and Plastering

SpeedSpec

09210 Cement Render

SpecPack

09210 Cement Render

Specification data - Polymer-modified renders

Cement

Off White Cement.

Sand

Medium.

Additives

Mineral.

Organic.

Polystyrene.

Colour

Grey.

Execution

Trowel.

Spray.

Dry film thickness

5-30 mm.

Number of coats

1 coat.

Guidance for specification option:

Depending on substrate and method of application.

Manufacturer guidance

Application not to exceed 30 mm per single coat. If the total thickness of the material is to exceed 30 mm, please contact the ROCKCOTE Technical Department.

Drying time

48-72 hours (full curing).

Manufacturer guidance

Dries in approximately 48 hours under normal drying conditions. (Dry times may vary with changes in temperature, humidity and residual moisture in the substrate.

PLEASE NOTE THAT A 20 to 30 mm THICK COAT NEEDS EXTRA TIME TO CURE AND DRY OUT BEFORE TEXTURING CAN COMMENCE).

Substrates

AAC panels.

Brick.

Concrete block.

Off-form concrete.

Block.

Show more

Manufacturer guidance

Please refer to the ROCKCOTE Systems Guide for all suitable substrates.

Sustainability data

Contains Red List materials

No

Country of material origin

Australia

Country of product manufacture

Australia

Literature

QuickRender_PM100HighBuild_TDS_September2020

QuickRender_PM100HighBuild_TDS_September2020

Rockcote Quick Render Range

Rockcote Quick Render Range

QuickRender_PM100HighBuild_SDS_April2021

QuickRender_PM100HighBuild_SDS_April2021

Similar products from Rockcote

Concrete Finish

Concrete Finish

Rockcote Quick Render Coarse

Rockcote Quick Render Coarse

Rockcote Quick Render Fibre Reinforced

Rockcote Quick Render Fibre Reinforced

Rockcote Quick Render Fine

Rockcote Quick Render Fine

Rockcote Quick Render Grey

Rockcote Quick Render Grey

Rockcote Quick Render High Strength

Rockcote Quick Render High Strength

Rockcote Quick Render Non-Combustible

Rockcote Quick Render Non-Combustible

Rockcote Quick Render Off White

Rockcote Quick Render Off White

Rockcote Quick Render PM100

Rockcote Quick Render PM100

Rockcote Quick Render Premium Sponge

Rockcote Quick Render Premium Sponge