Name: Spanform™ Non-Cyclonic (COLORBOND® Steel)
Brand: Fielders
SKU: sMzELUdLb4bTQzA9gwScQV

Standards	To AS 1397 and AS/NZS 2728. Guidance for specification option: Installation of the cladding should be in accordance with AS 1562.1 and HB 39.
Grade	G550.
Coating class	AM125.
Base Metal thickness (BMT)	0.42 mm. Guidance for specification option: Total Coated Thickness of 0.47 mm. 0.48 mm. Guidance for specification option: Total Coated Thickness of 0.53 mm. Manufacturer guidance Indicated Total Coated Thickness (TCT) is based on standard COLORBOND®, single-sided material.
Profile	-
Form	Trapezoidal.
Height	24 mm. Manufacturer guidance Refers to rib height.
Cover width	700 mm. Manufacturer guidance Provide manufacturing tolerance of ±4 mm.
Colour	Standard ZINCALUME steel colour.
Finish	Zinc-coated.

Material	ZINCALUME® steel.
Length	- Manufacturer guidance Sheets are supplied custom cut to length to suit project requirements. Transportation limits apply. To address thermal expansion and contraction, the recommended maximum sheet length is 24 m. Where lengths exceed 24 m, step joints or concealed decks are recommended. Provide manufacturing tolerance of ±7 mm in length.
Span	900 mm. 1200 mm. 1500 mm. 1800 mm. 2100 mm. 2400 mm. 2700 mm. 3000 mm. 3300 mm. Show more Manufacturer guidance Refers to maximum allowable spans based on supports of 1.0 mm BMT. These vary depending on profile thickness and span type. Maximum spans are as follows: 0.42 mm BMT roofing: 1050 – 2400 mm. 0.42 mm BMT walling: 1400 – 3500 mm. 0.48 mm BMT roofing: 1450 – 3000 mm. 0.48 mm BMT walling: 1650 – 3550 mm.
Thermal expansion	2.9 mm average per 5.0 m. Manufacturer guidance Computed at 50° C change.
Frame or support	Steel (1.0 to 3.5 mm). Guidance for specification option: For crest fixing, use 12g-14 x 45 mm Hex Head Auto Tek screws with HiGrip and seal. For valley fixing, use 10g-16 x 16 mm Hex Head Tek screws with seal. If side lap fixing is necessary, use 10g-16 x 16 mm Hex Head Tek screws with seal. Timber Hardwood. Guidance for specification option: For crest fixing, use M6-11 x 65 mm Hex Head RoofZip srews with HiGrip and seal. For valley fixing, use M6-11 x 25 mm Hex Head RoofZip screws with seal. If side lap fixing is necessary, use 10g-16 x 16 mm Hex Head Tek screws with seal. Timber Softwood. Guidance for specification option: For crest fixing, use M6-11 x 65 mm Hex Head RoofZip srews with HiGrip and seal. For valley fixing, use M6-11 x 25 mm Hex Head RoofZip screws with seal. If side lap fixing is necessary, use 10g-16 x 16 mm Hex Head Tek screws with seal. Metal Battens (0.55 to 1.0 mm). Guidance for specification option: For crest fixing, use M6-11 x 50 mm Hex Head RoofZip screws with HiGrip and seal. For valley fixing, use 15g-15 x 25 mm Hex Head Tek screws with seal. If side lap fixing is necessary, use 10g-16 x 16 mm Hex Head Tek screws with seal. Manufacturer guidance Refers to recommended fixing supports and fasteners. Use three fasteners per sheet for internal supports.
Mass	4.48 – 4.71 kg/m² (0.42 mm BMT). 5.29 – 5.38 kg/m² (0.48 mm BMT).
Insulation	- Manufacturer guidance When insulation thickness up to 50 mm are installed, screws may need to be increased in number depending on insulation thickness and density. For insulation thicknesses greater than 50 mm, Fielders® recommends the use of a thermal spacer.
Installation	Pierced-fixed.
Ancillary components	Masonry Parapet Side Wall (Low or High). Apron Flashings. Overflashing. Headwall Apron Flashing. Soaker Gutter. Soffit Corner Flashing. Shoe Flashing. Bracket. Valley Gutter. Under Over Flashing. Mansard Roof Flashing. Industrial Door Jamb Flashing. Apex Capping (Type 1 or 2). Back Channel. Barge Capping. Framed Parapet Capping. Two Piece Step Flashing. Sliding Bracket. Show more Manufacturer guidance Optionally available. Contact manufacturer for further details.

Material	Steel.
Shape	Rectangle
Warranty description	- Manufacturer guidance Covered by BlueScope material warranties, subject to project assessment and terms and conditions.

Uniclass	Pr_25_71_51_89 Steel profiled sheetPrimary
SpeedSpec	07610 Roofing and Roof Plumbing 07462 Cladding External Walls
NATSPEC National Classification System	0436 Cladding – Profiled and Seamed Sheet Metal 0423 Roofing – Profiled Sheet Metal
SpecPack	07600 Metal Roofing, Siding and Roof Plumbing

Country of material origin	Australia
Country of product manufacture	Australia
Recyclability	100% Recyclable.

Spanform™ Non-Cyclonic (COLORBOND® Steel)

Application

Description

General information

Material

Shape

Warranty description

Manufacturer guidance

Uniclass

SpeedSpec

NATSPEC National Classification System

SpecPack

Specification data - Steel profiled sheet

Standards

To AS 1397 and AS/NZS 2728.

Grade

G550.

Coating class

AM125.

Base Metal thickness (BMT)

0.42 mm.

0.48 mm.

Manufacturer guidance

Profile

Form

Trapezoidal.

Height

24 mm.

Manufacturer guidance

Cover width

700 mm.

Manufacturer guidance

Colour

Standard ZINCALUME steel colour.

Finish

Zinc-coated.

Material

Length

Manufacturer guidance

Span

Manufacturer guidance

Thermal expansion

Manufacturer guidance

Frame or support

Manufacturer guidance

Mass

Insulation

Manufacturer guidance

Installation

Ancillary components

Manufacturer guidance

Sustainability data

Country of material origin

Country of product manufacture

Recyclability

Similar products from Fielders