Verified by manufacturer over a year ago
COLORBOND® Steel
Roofing and walling profile with higher and squarer ribs.
Suitable as either roofing or walling profile for a variety of steel projects.
AUSTRALIAN STANDARDS
Published load capacity data is derived from testing in accordance with:
Published Limit state capacities are suitable to determine structural adequacy and serviceability in accordance with:
Published installation guidelines align with AS 1562.1:2018 Design and Installation of sheet and wall cladding.
Fielders steel products comply with:
Spanform™ Non-Cyclonic is a roofing and walling profile with higher and squarer ribs, thereby providing impressive product strength. Some of its features include:
Material | Steel. |
Shape | Rectangle |
Warranty description | Manufacturer guidanceCovered by BlueScope material warranties, subject to project assessment and terms and conditions. |
Uniclass | |
SpeedSpec | 07610 Roofing and Roof Plumbing 07462 Cladding External Walls |
NATSPEC National Classification System | 0436 Cladding – Profiled and Seamed Sheet Metal 0423 Roofing – Profiled Sheet Metal |
SpecPack | 07600 Metal Roofing, Siding and Roof Plumbing |
Standards | To AS 1397 and AS/NZS 2728.Guidance for specification option: Installation of the cladding should be in accordance with AS 1562.1 and HB 39. |
Grade | G550. |
Coating class | AM100. |
Base Metal thickness (BMT) | 0.42 mm.Guidance for specification option: Total Coated Thickness of 0.47 mm. 0.48 mm.Guidance for specification option: Total Coated Thickness of 0.53 mm. Manufacturer guidanceIndicated Total Coated Thickness (TCT) is based on standard COLORBOND®, single-sided material. |
Profile | |
Form | Trapezoidal. |
Height | 24 mm.Manufacturer guidanceRefers to rib height. |
Cover width | 700 mm.Manufacturer guidanceProvide manufacturing tolerance of ±4 mm. |
Colour | Basalt.Classic Cream.Cottage Green.Cove.Deep Ocean.Dune.Evening Haze.Gully.Ironstone.Jasper.Mangrove.Manor Red.Monument.Night Sky.Pale Eucalypt.Paperbark.Shale Grey.Surfmist.Terrain.Wallaby.Windspray.Woodland Grey. |
Finish | Painted. |
Solar absorptance value (maximum) | 0.32–0.96.Manufacturer guidanceValue is dependant on colour. Contact manufacturer for further assistance. |
Material | COLORBOND® steel. |
Length | Manufacturer guidanceSheets are supplied custom cut to length to suit project requirements. Transportation limits apply. To address thermal expansion and contraction, the recommended maximum sheet length is 24 m. Where lengths exceed 24 m, step joints or concealed decks are recommended. Provide manufacturing tolerance of ±7 mm in length. |
Span | 900 mm. 1200 mm. 1500 mm. 1800 mm. 2100 mm. Manufacturer guidanceRefers to maximum allowable spans based on supports of 1.0 mm BMT. These vary depending on profile thickness and span type. Maximum spans are as follows:
|
Thermal expansion | 2.9 mm average per 5.0 m. Manufacturer guidanceComputed at 50° C change. |
Frame or support | Steel (1.0 to 3.5 mm). Guidance for specification option:
Timber Hardwood. Guidance for specification option:
Timber Softwood. Guidance for specification option:
Metal Battens (0.55 to 1.0 mm). Guidance for specification option:
Manufacturer guidanceRefers to recommended fixing supports and fasteners. Use three fasteners per sheet for internal supports. |
Mass | 4.48 – 4.71 kg/m² (0.42 mm BMT). 5.29 – 5.38 kg/m² (0.48 mm BMT). |
Insulation | Manufacturer guidanceWhen insulation thickness up to 50 mm are installed, screws may need to be increased in number depending on insulation thickness and density. For insulation thicknesses greater than 50 mm, Fielders® recommends the use of a thermal spacer. |
Installation | Pierced-fixed. |
Ancillary components | Masonry Parapet Side Wall (Low or High). Apron Flashings. Overflashing. Headwall Apron Flashing. Soaker Gutter. Manufacturer guidanceOptionally available. Contact manufacturer for further details. |
Country of material origin | Australia |
Country of product manufacture | Australia |
Recyclability | 100% Recyclable. |