NBS Source
I'm a manufacturer

TREMproof 250GC

Verified by manufacturer over a year ago

Tremco

Single component, green & damp concrete approved, rapid curing, polyurethane waterproofing membrane.

Jump to:
+61 2 9638 2755 Website

Application

  • Can be applied on 24-hour old concrete, allowing for rapid acceleration of the construction time-frame and installation of landscaping or backfill.
  • Can be applied onto green concrete, minimising construction delays due to inclement weather.
  • Effective membrane for use on concrete, wood and prepared masonry surfaces in areas such as retaining walls, below grade waterproofing, tunnels, planter boxes (with anti-root additive).

Description

A rapid curing, high solids, low VOC, moisture cure modified polyurethane waterproofing membrane that can be applied to (24hour old) concrete.

 

  • Tested to AS 4654.1 – Waterproofing membranes for external above ground use.
  • Single component minimises application errors with improper mixing of plural component products.
  • Minimum 85% solids assist the contractor in applying the correct dry film thickness by allowing them to quickly measure the wet film thickness. 
  • Multiple application types allow a single membrane to be used on many applications throughout the project.
  • Can be applied at a rate up to 3mm in a single lift to speed application without sacrificing performance.

General information

Material

Polyurethane waterproofing membrane.

Uniclass

Pr_35_31_68_64 Polyurethane (PUR) waterproof coatingsPrimary

NATSPEC National Classification System

0411 Waterproofing – External and Tanking

SpeedSpec

07130 Waterproofing and Tanking

SpecPack

07130 Waterproofing and Tanking

Product range

TREMproof

Specification data - Polyurethane (PUR) waterproof coatings

Standard

To AS 4654.1.

Manufacturer guidance

In compliance with the NCC for external waterproofing in Australia. Check with manufacturer.

Form

Single component, high solids, moisture cured.

Colour

Black.

Curing time

Between 4 to 96 hours.

Manufacturer guidance

Cure times as stated below are based upon standard ambient conditions between 18 to 30°C at 50% RH. Check with the manufacturer for details.

VOC content

179 g/L.

Sustainability data

Country of material origin

United States

Country of product manufacture

United States

Literature

Tremco Waterproofing Brochure

Tremco Waterproofing Brochure

TREMproof 250GC TDS

TREMproof 250GC TDS

TREMproof 250 GC VOC Certificate

TREMproof 250 GC VOC Certificate

Similar products from Tremco

AlphaGuard BIO

AlphaGuard BIO

TREMproof 201/60R

TREMproof 201/60R

TREMproof P85

TREMproof P85

Vulkem 350/346

Vulkem 350/346

Vulkem 360NF/951NF

Vulkem 360NF/951NF

Vulkem NEM

Vulkem NEM