Ventilation and ducting
Ventilation includes a range of ventilator requirements such as roof ventilators, wall grilles, extract hoods, etc. Browse products for Ventilation and ducting below.
Can't find what you're looking for?
Recently verified
Showing 289-307 of 307
AIRTRAK® VR Ventilated Ridge - Roof Ventilation System
Verified 5 months ago
Nicholson STS Ltd
Introduces ventilation at the head of slated or tiled pitch where it reaches the ridge.
AIRTRAK® VT Ventilated Edge Trim - Roof Ventilation System
Verified 5 months ago
Nicholson STS Ltd
Provides a continuous ventilation detail to the bottom edge of a plywood fascia or cladding.
AIRTRAK® AB3 Abutment Ventilator - Roof Ventilation System
Verified 5 months ago
Nicholson STS Ltd
Abutment ventilator for mastic asphalt (vertical kerb).
AIRTRAK® BRV Between Roll Ventilators - Roof Ventilation System
Verified 5 months ago
Nicholson STS Ltd
Range of between-roll ventilators for lead ridge details.
AIRTRAK® AB4 Abutment Ventilator - Roof Ventilation System
Verified 5 months ago
Nicholson STS Ltd
Abutment ventilator for mastic asphalt (splayed kerb).
AIRTRAK® AB6 Abutment Ventilator - Roof Ventilation System
Verified 5 months ago
Nicholson STS Ltd
Ventilator for use at a parapet wall abutment.
AIRTRAK® PE Pitched Eaves Ventilators - Roof Ventilation System
Verified 5 months ago
Nicholson STS Ltd
Provides an unobtrusive ventilation path into the roof void at the bottom of a pitched roof slope.
Cast iron and aluminium ventilation grilles and gratings. Decorative floor and wall heating vent. CGA01 Grille.
Verified 5 months ago
Britannia Metalwork Services Ltd
Cast gratings.
Bespoke AOV Smoke Vents SHEV
Verified 6 months ago
Surespan
Aluminium smoke ventilators in aluminium or glass available in a range of bespoke sizes up to 3000 x 1800 mm, all thermally broken and insulated.
AIRTRAK® PRV Pitched Roof Ventilator - Roof Ventilation System
Verified 6 months ago
Nicholson STS Ltd
Provides point ventilation to lead roofs and vertical cladding where appropriate.
AIRTRAK® SLV Slate Ventilator - Roof Ventilation System
Verified 6 months ago
Nicholson STS Ltd
Low profile roof ventilator.
AIRTRAK® CS Comb Strip - Roof Ventilation System
Verified 6 months ago
Nicholson STS Ltd
Comb strip designed to prevent the entry of birds and vermin into the batten void beneath profiled tiles at the eaves.
AIRTRAK® EC Eaves Carrier - Roof Ventilation System
Verified 6 months ago
Nicholson STS Ltd
Support profile to prevent ponding at eaves caused by a backfall in the roof underlay membrane.
AIRTRAK® RV Roll Vent - Roof Ventilation System
Verified 6 months ago
Nicholson STS Ltd
Roll ventilator designed to ensure that the airpath at the eaves is unobstructed by the insulation where it sits above the wall plate.
AIRTRAK® CV Cheek Ventilator - Roof Ventilation System
Verified 6 months ago
Nicholson STS Ltd
Provides ventilation into vertical lead cladding.
Air Brick and Adjustable Cavity Vent
Verified 6 months ago
Cordek Ltd
Airbrick and Adjustable Cavity Vents provide ventilation to the sub-floor void through the external masonry walls. The cavity vent is adjustable and the air bricks are available in a range of colours.
GP® Vent Box & Accessories
Verified 6 months ago
Juta UK Ltd
Ground level ventilation unit.
RyMar® IM Vent Pipe Cover
Verified 6 months ago
Fixfast Ltd
Vent pipe cover - insertion model.
Eggcrate Core Grille - Extract/ Air Transfer Grille
Verified 6 months ago
GDL Air Systems Ltd
Eggcrate Core Grille for extract or air transfer applications.
Showing 289-307 of 307