NBS Source
I'm a manufacturer
FITTINGS FOR PURE 5.0 GASES

Product catalogue

FITTINGS FOR PURE 5.0 GASES

by BROEN-LAB

BROEN-LAB Cleanline products are designed, produced and intended for use with 5.0 (99,999%) gases. All individual parts for these valves are ultrasonically cleaned and dried in order to remove oil and particles from all parts before assembly. We ensure in this way to have a surface cleaner than 100 mg mineral oil/m2, typically as low as <8-15 mg/m2. Immediately after the mentioned cleaning of the individual parts these are assembled and individually tested in a protected area in our production. Finally, the valve is packed and sealed in a plastic bag. Label on each bag is showing the actual cleanness of the product.

Products related to this literature

View all products (27)
Wall Mounted Pure Gas Tap for Exposed Piping; With Isolation Regulator and Flow Valve

Wall Mounted Pure Gas Tap for Exposed Piping; With Isolation Regulator and Flow Valve

More literature from BROEN-LAB

View all literature (44)
Table mounted catering mixer prerinse mixer with hand shower and swivel spout TDS

Table mounted catering mixer prerinse mixer with hand shower and swivel spout TDS

Table mounted laboratory 0-8.5 bar pressure regulator purity level 2.0 TDS

Table mounted laboratory 0-8.5 bar pressure regulator purity level 2.0 TDS

Table mounted laboratory combination water and burning gas tap TDS

Table mounted laboratory combination water and burning gas tap TDS

Table mounted laboratory hands-free water tap TDS

Table mounted laboratory hands-free water tap TDS