A-Z
Showing 1-36 of 44
Absorbent Sound Screen
JCW Acoustic Supplies Limited
Absorbent Sound Screen suitable for Industrial and Commercial applications
Conforms and tested to BS EN 1793, BS EN1794-1 & BS EN 1794-2
Complies with Highways Sector Scheme 2C
Acoustic Baffles
JCW Acoustic Supplies Limited
Data Sheet
Acoustic Barrier Mat
JCW Acoustic Supplies Limited
Multi Purpose dense acoustic barrier matting, Ideal for use between layers of plasterboard in walls and ceilings for adding additional mass to assist in reducing airborne noise
Acoustic Cradle Levelling System
JCW Acoustic Supplies Limited
A ROBUST DETAIL FFT-2 RESILIENT CRADLE AND BATTEN SYSTEM FOR CONCRETE, STEEL-CONCRETE COMPOSITE AND TIMBER FLOORS. IDEAL FOR LEVELLING BOTH INTERNAL AND EXTERNAL FLOORS PRIOR TO THE INSTALLATION OF DECKING.
The Cradle System has been developed as a quick and easy way to level cambered, stepped and uneven sub-floors so common in traditional construction. The unique interlocking cradle and riser combinations allow a vast range of void depths to be achieved. The result is much improved resistance to the transmission of impact and airborne sound.
2mm Packing Shims permit ultimate flexibility in final height adjustment
Combination of cradles, risers and timber supports provide a variety of raised floor designs
Complies with the requirements of Approved part E and Robust Detail
Acoustic Deck 19 for Concrete Floors
JCW Acoustic Supplies Limited
ACOUSTIC DECK 19 FOR CONCRETE FLOORS
AN MDF BASED ACOUSTIC OVERLAY BOARD, SHALLOW PLATFORM FLOOR SYSTEM (TYPE FFT5) FOR USE WITH ROBUST STANDARD DETAIL CONCRETE FLOOR CONSTRUCTIONS
Can be used with these Robust Standard Detail flooring types: E-FC-1, E-FC-2 and steel floor E-FS-1.
Low profile: At only 19 mm thick JCW Acoustic Deck 19 is an ideal solution where construction heights are a problem.
Performance: the very best product on the market for concrete construction.
Convenient: this economical product is easy to install and always available for fast delivery nationwide.
JCW Acoustic Deck 19 has been tested and is certified to provide the necessary acoustic insulation required for compliance with part E of the building regulations for these RSD floor types.
Acoustic Deck 19 for Timber Floors
JCW Acoustic Supplies Limited
ACOUSTIC DECK 19 FOR TIMBER FLOORS IS A MDF BASED ACOUSTIC OVERLAY BOARD, SHALLOW PLATFORM FLOOR SYSTEM. At only 19mm thick JCW Acoustic Deck 28 is an ideal system which minimises construction heights whilst still complying with statutory regulations. 9mm moisture resistant t&g MDF laminated to a 10mm acoustic resilient layer. Ideal for conversion and refurbishment targets meeting Part E performance targets.
Acoustic Deck 28 / 32 for Concrete Floors
JCW Acoustic Supplies Limited
ACOUSTIC DECK 28/32 FOR CONCRETE FLOORS IS A CHIPBOARD BASED ACOUSTIC OVERLAY BOARD, PLATFORM FLOOR SYSTEM (TYPE FFT5) FOR USE WITH ROBUST STANDARD DETAIL CONCRETE FLOOR CONSTRUCTIONS Can be used with these Robust Standard Detail flooring types: E-FC-1, E-FC-2 and steel floor E-FS-1. At only 28mm thick JCW Acoustic Deck 28 is an ideal system which minimises construction heights whilst still complying with statutory regulations. 18mm P5 t&g chipboard laminated to a 10mm acoustic resilient layer. Convenient: this economical product is easy to install and always available for fast delivery nationwide. JCW Acoustic Deck 28/32 has been tested and is certified to provide the necessary acoustic insulation required for compliance with part E of the building regulations for these RSD floor types.
Acoustic Deck 28 / 32 for Timber Floors
JCW Acoustic Supplies Limited
ACOUSTIC DECK 28 FOR TIMBER FLOORS IS A CHIPBOARD BASED ACOUSTIC OVERLAY BOARD, PLATFORM FLOOR SYSTEM. At only 28mm thick JCW Acoustic Deck 28 is an ideal system which minimises construction heights whilst still complying with statutory regulations. 18mm P5 t&g chipboard laminated to a 10mm acoustic resilient layer. Ideal for conversion and refurbishment targets meeting Part E performance targets.
Acoustic Deck 30C
JCW Acoustic Supplies Limited
Chipboard based high performance premium acoustic deck for fitment onto an existing sub-floor.
Acoustic Deck 33
JCW Acoustic Supplies Limited
CHIPBOARD BASED PREMIUM ACOUSTIC DECK OVERLAY BOARDS FOR TIMBER FLOORS WITH EXCELLENT AIRBORNE AND GOOD IMPACT PERFORMANCE.
Deck 33 dramatically reduces sound transmission through timber floors.
This is one of the quickest and most effective acoustic solutions on the market. At just 33mm thickness this acoustic deck minimises construction height whilst still complying with statutory regs
18mm P5 flooring grade t&g chipboard laminated to an acoustic resilient layer comprising acoustic foam and weight enhanced barrier mat
Ideal for overlaying existing timber floors with exceptional impact sound performance
Impact and airborne sound insulation in one product ready for final floor installation
Meets Part 'E' and Robust Detail performance targets for timber frame construction
Acoustic Deck 34 - Premium Acoustic Overlay Board for Timber Floors
JCW Acoustic Supplies Limited
JCW ACOUSTIC DECK 34 IS A PREMIUM ACOUSTIC OVERLAY BOARD FOR TIMBER FLOORS WITH EXCELLENT AIRBORNE AND IMPACT PERFORMANCE. The slim profile and high acoustic performance of Acoustic Deck 34 premium overlay board makes it ideal for timber floor refurbishment or new build projects. Deck 34 consists of a 12mm acoustic resilient layer laminated to a high density premium quality 22mm Cement Based Board. Suitable for both 400mm and 600mm joist centres.
Acoustic Deck 34c
JCW Acoustic Supplies Limited
12MM RESILIENT ACOUSTIC LAYER LAMINATED TO A 22MM T&G CHIPBOARD, DESIGNED FOR FITTING DIRECT TO JOIST The slim profile and high acoustic performance of Acoustic Deck 34c make it an ideal solution in timber floor refurbishment projects. Deck34c is specially designed for direct to joist fitment after existing timber floor has been removed therefore removing the requirement for a new sub-floor. Saves height and money making it ideal for overcoming floor-to-ceiling height issues. Strong and rigid: Suits both 400mm and 600mm joist centres. None load bearing partitions can be built off the floor Deck 34c is certified to provide the acoustic insulation required for compliance with part E of the Building Regs for both impact and airborne noise
Acoustic Deck 37 - Premium Direct to Joist Acoustic Board
JCW Acoustic Supplies Limited
15MM HIGH PERFORMANCE RESILIENT ACOUSTIC LAYER LAMINATED TO A 22MM T&G CEMENT BASED BOARD, DESIGNED FOR FITTING DIRECT TO JOISTS. Slim profile and high acoustic performance options of Acoustic Deck 37 make it ideal in timber floor refurbishment projects. Deck37 is specially designed for direct to joist fit after existing timber floor has been removed. Saves height saves money removing existing timber floors, therefore removing requirement for laying a new one, overcoming floor-to-ceiling height issues, saving money and time Strong and rigid: Suits both 400mm and 600mm joist centres. Non load bearing partitions can be built off the floor. Deck37 is certified to provide the acoustic insulation required for compliance with part E of the Building Regs for both impact and airborne noise
Acoustic Deck 37c - Direct to Joist Acoustic Board
JCW Acoustic Supplies Limited
15MM RESILIENT ACOUSTIC LAYER LAMINATED TO A 22MM T&G CHIPBOARD, DESIGNED FOR FITTING DIRECT TO JOIST
The slim profile and high acoustic performance of Acoustic Deck 37c make it an ideal solution in timber floor refurbishment projects. Deck37c is specially designed for direct to joist fitment after existing timber floor has been removed therefore removing the requirement for a new sub-floor. Saves height and money making it ideal for overcoming floor-to-ceiling height issues. Strong and rigid: Suits both 400mm and 600mm joist centres. None load bearing partitions can be built off the floor
Deck37c is certified to provide the acoustic insulation required for compliance with part E of the Building Regs for both impact and airborne noise
Acoustic Deck 37P
JCW Acoustic Supplies Limited
15MM RESILIENT ACOUSTIC LAYER LAMINATED TO A 22MM T&G PLYWOOD, DESIGNED FOR FITTING DIRECT TO JOIST the slim profile and high acoustic performance of Acoustic Deck 37P make it an ideal solution in timber floor refurbishment projects. Deck37P is specially designed for direct to joist fitment after existing timber floor has been removed therefore removing the requirement for a new sub-floor. Saves height and money making it ideal for overcoming floor-to-ceiling height issues. Strong and rigid: Suits both 400mm and 600mm joist centres. None load bearing partitions can be built off the floor. Deck 37P is certified to provide the acoustic insulation required for compliance with part E of the Building Regs for both impact and airborne noise
Acoustic Flooring Batten 50C
JCW Acoustic Supplies Limited
ACOUSTIC BATTEN JCW 50C IS IDEAL FOR CONCRETE FFT-3 FLOATING FLOOR TYPES: E-FC-1, E-FC-2, E-FC-7 AND E-FS-1
Raised floor space can be used for installing services
Ideal for good impact sound improvement where height permits
In refurbishments, it is overlaid onto flat timber or concrete floors
Size: 50mm deep x 42mm x 1800mm
Weight: 1.9 kgs
Reduction in Impact Sound Transmission: rd Lw = 28 dB
For more information on this product call us today on 01204 548400.
Acoustic Flooring Batten 80C
JCW Acoustic Supplies Limited
ACOUSTIC BATTEN JCW 80C
JCW ACOUSTIC BATTEN 80C IS IDEAL FOR CONCRETE FFT-1 FLOATING FLOOR TYPES: E-FC-1, E-FC-2, E-FC-7 AND E-FS-1
Raised floor space can be used for installing services
Ideal for good impact sound improvement where height permits
In refurbishments, it is overlaid onto flat timber or concrete floors
Size: 80mm deep x 42mm x 1800mm
Weight: 2.9 kgs
Reduction in Impact Sound Transmission = rd Lw 31 dB
CALL US TODAY
For more information on this product call us today on 01204 548400.
Acoustic Flooring Batten 80T
JCW Acoustic Supplies Limited
ACOUSTIC BATTEN JCW 80T IS IDEAL FOR TIMBER FFT-1 FLOATING FLOOR TYPES: E-FT-1, E-FT-2 AND E-FT-3
Raised floor space can be used for installing services
Ideal for good impact sound improvement where height permits
In refurbishments, it is overlaid onto flat timber or concrete floors
Size: 80mm deep x 42mm x 1800mm
Weight: 2.9 kgs
Reduction in Impact Sound Transmission: rd Lw = 16 dB
For more information on this product call us today on 01204 548400.
Acoustic Flooring Batten 90T
JCW Acoustic Supplies Limited
ACOUSTIC BATTEN JCW 90T IS IDEAL FOR TIMBER FFT-80 FLOATING FLOOR TYPES: E-FT-7 AND E-FT-7
Raised floor space can be used for installing services
Ideal for good impact sound improvement where height permits
In refurbishments, it is overlaid onto flat timber or concrete floors
Size: 90mm deep x 42mm x 1800mm
Weight: 2.9 kgs
Reduction in Impact Sound Transmission: rd Lw = 16 dB
For more information on this product call us today on 01204 548400.
Acoustic Isolation Strips
JCW Acoustic Supplies Limited
Resilient Acoustic Isolation Strip manufactured from recycled rubber. An acoustic isolating strip system used to prevent sound transfer through partitioning or party walls in all forms of construction where there is any point of contact. suitable for use beneath lightweight steel or timber partitions
Acoustic Perimeter Edging Strip
JCW Acoustic Supplies Limited
PERIMETER ISOLATION STRIP TO BE USED INCONJUNCTION WITH ALL ACOUSTIC FLOOR TYPES (BATTENS, DECKS, CRADLES, PLATFORM FLOORS) TO MAINTAIN ACOUSTIC INTEGRITY. Perimeter edging strips (also know as Flanking Band) are available in flat or Pre-Formed L Shaped Versions. Flat versions are offered at a thickness of 5mm and either 75mm or 150mm wide (to suit a variety of floor heights) in rolls of 50LM. Pre-Formed L Shaped version is available in a size of 53mm x 23mm x 2LM.
Essential ancillary product that must be used with all acoustic floating floors to ensure no direct contact between the floor and walls and skirting boards to maintain full acoustic integrity therefore preventing and eliminating the risk of the flanking transmission of impact noise throughout the construction
Acoustic Screed Foam
JCW Acoustic Supplies Limited
A SOUND INSULATION SYSTEM FOR CONCRETE FLOORS, ROBUST RESILIENT UNDER SCREED LAYER SYSTEM. Suitable for precast and solid concrete floors (minimum weight 300kg/m2) Convenient: Minimal change to traditional floor and ceiling construction Resilient: JCW Screed Foam is an economic underscreed material designed for the real building sites. Acoustic Testing & Compliance JCW Impacta Rubber has been site tested for the new 2003 requirements: complies with RSD performance targets. Accepted by NHBC for A.D.E. compliance. For more information on this product call us today on 01204 548400.
Acoustic Socket Liner
JCW Acoustic Supplies Limited
Acoustic Sockets help assist in maintaining the acoustic integrity of walls when electrical sockets are an issue.
Easily installed and highly effective in preventing sound penetration through walls.
Fire and Acoustic Downlighter Covers
JCW Acoustic Supplies Limited
Helps to maintain the acoustic integrity of ceilings whilst also helping to maintain fire resistance
Fire Rated Luminaire Covers
JCW Acoustic Supplies Limited
Recessed luminaire cover to assist in maintaining fire integrity of a suspended ceiling system when a ceiling tile is replaced by recessed luminaires.
60 minute Fire Tested to BS 476: Part 23
Impacta 4551 Mat - Bonded Acoustic Resilient Floor Covering for Hollow Core Concrete Floors
JCW Acoustic Supplies Limited
A ROBUST ACOUSTIC UNDERLAY MATTING MATERIAL DESIGNED TO ATTENUATE IMPACT SOUND AT SOURCE.
Impacta 4551 Mat is suitable for all floor finishes including ceramic tiles, vinyl, wood and laminates, carpet and marmoleum.
Universal: JCW Impacta 4551 Mat can be bonded to all types of base floors.
Tested: Following extensive testing, JCW Impacta Adhesive is recommended to bond the product to the base floor.
Plastersizer Migration Report: Clickhereto download an independent report which clearly states that the JCW Impacta 4551 Mat product does not cause Plastersizer Migration.
Acoustic Testing & Compliance
JCW Impacta 4551 Mat has been accepted by NHBC for ADE compliance.
For more information on this product call us today on 01204 548400.
Impacta 4551 Mat - Bonded Acoustic Resilient Floor Covering for Solid Concrete Floors
JCW Acoustic Supplies Limited
ROBUST ACOUSTIC UNDERLAY MATTING MATERIAL DESIGNED TO ATTENUATE IMPACT SOUND AT SOURCE. Impacta 4551 Mat is suitable for all floor finishes including ceramic tiles, vinyl, wood and laminates, carpet and marmoleum. Universal: JCW Impacta 4551 Mat can be bonded to all types of base floors. Tested: Following extensive testing, JCW Impacta Adhesive is recommended to bond the product to the base floor. Plastersizer Migration Report: An independent report is available on request clearly confirms that JCW Impacta 4551 Mat product does not cause Plastersizer Migration. Acoustic Testing & Compliance JCW Impacta 4551 Mat has been accepted by NHBC for ADE compliance. For more information on this product call us today on 01204 548400.
Impacta Mat 4551 for Timber Floors
JCW Acoustic Supplies Limited
A ROBUST BONDED RESILIENT FLOOR COVERING. ACOUSTIC UNDERLAY MATTING MATERIAL DESIGNED TO ATTENUATE IMPACT SOUND AT SOURCE. Impacta 4551 Timber at 4.5mm thick is suitable for all floor finishes including ceramic tiles, vinyl, wood and laminates, carpet and marmoleum. Universal: JCW Impacta 4551 Timber can be bonded to all types of base floors. Tested: Following extensive testing, JCW Impacta Adhesive is recommended to bond the product to the base floor. Plastersizer Migration Report: Independent report available on request which clearly states that the JCW Impacta 4551 Mat product does not cause Plastersizer Migration. Acoustic Testing & Compliance JCW Impacta 4551 Mat has been accepted by NHBC for ADE compliance. For more information on this product call us today on 01204 548400.
Impacta Rubber - Acoustic Underscreed Resilent Layer
JCW Acoustic Supplies Limited
A SOUND INSULATION SYSTEM FOR CONCRETE FLOORS, ROBUST RESILIENT UNDER SCREED LAYER SYSTEM.
Suitable for precast and solid concrete floors (minimum weight 300kg/m2)
Convenient: Minimal change to traditional floor and ceiling construction
Resilient: JCW Impacta Rubber is a tough, puncture-proof, heavy material designed for the real building site.
Acoustic Testing & Compliance
JCW Impacta Rubber has been site tested for the new 2003 requirements: complies with RSD performance targets. Accepted by NHBC for A.D.E. compliance.
For more information on this product call us today on 01204 548400.
Impactalay
JCW Acoustic Supplies Limited
JCW IMPACTALAY 12MM THICK ACOUSTIC MATTING FOR TIMBER
FLOORS OFFERS A COST EFFECTIVE AND EASILY INSTALLED SOLUTION TO COMBAT AIRBORNE AND IMPACT NOISE. Suitable for timber floors. Suitable for all final floor finishes. Material: JCW Impactalay Acoustic Matting is made from a single acoustic layer of barrier mat with a resilient chip foam core. The acoustic foam does not harden or crumble, unlike the Class O foam normally found in these applications. Versatile: suitable for all final finishes on timber floors. Ideal domestic Impact and Airborne sound insulation product where height is restricted Easy to cut, trim and shape in easy to handle 1000mm x 1200mm sheets Suitable for conversion projects
Impactalay Plus
JCW Acoustic Supplies Limited
JCW IMPACTALAY PLUS 15MM THICK ACOUSTIC MATTING FOR TIMBER FLOORS OFFERS A COST EFFECTIVE AND EASILY INSTALLED SOLUTION TO COMBAT AIRBORNE AND IMPACT NOISE.
Suitable for timber floors. Suitable for all final floor finishes.
Material: JCW Impactalay Plus Acoustic Matting is made from two acoustic layers of barrier mat with a resilient chip foam core. The acoustic foam does not harden or crumble, unlike the Class O foam normally found in these applications.
Versatile: suitable for all final finishes on timber floors.
Ideal domestic Impact and Airborne sound insulation product where height is restricted
Easy to cut, trim and shape in easy to handle 600mm x 1200mm sheets
Suitable for conversion projects
Impactalay10 Acoustic Underlay
JCW Acoustic Supplies Limited
JCW IMPACTALAY10 IS A 10MM THICK ACOUSTIC OVERLAY MATTING FOR TIMBER AND CONCRETE FLOORS OFFERS AN EFFECTIVE AND EASY TO INSTALL SOLUTION WHEN COMBATING AIRBORNE AND IMPACT NOISE.
Impactalay10 from JCW Acoustic Supplies is the ideal solution for
sound insulating floors in domestic situations.
Can be used to bring the overall floor/ceiling construction up to the
standards of Approved Document E in most Lath and Plaster and
resiliently fixed, double plaster boarded ceilings
10mm Impacta overlay system could be considered for conversion projects based on the above structure
Easily cut, trimmed and shaped for fast installation
Reduces impact noise
Improves airborne noise insulation
www.acoustic-supplies.com/products/jcw-impactalay10/
JCW Acoustic Silentboard Plus
JCW Acoustic Supplies Limited
JCW Silentboard Plus is an enhanced acoustic wall liner. Acoustic overlay improvement board for new an/or existing walls. Comprising a 20mm resilient layer bonded to 12.5mm acoustic plasterboard. Can be bonded to existing brick, block and boarded walls. Plasterboard surface ready for decoration. Assists in meeting performance requirements of Approved Document E for refurbishments and material change of use
JCW Acoustic Supplies Product Range Brochure
JCW Acoustic Supplies Limited
Product brochure giving an overview of the entire JCW Acoustic Supplies Product Range including:-
Acoustic Flooring to meet Building Regulations Approved Document E and Section 5 Scottish Building Standards
Absorption products for use in a variety of scenarios such as classrooms, offices and meeting rooms to reduce echo and reverberation
Acoustic Fencing and Barriers to reduce outdoor noise issues where noise generated by traffic, railways or nearby commercial buildings can be a problem.
JCW Reflecta Sound
JCW Acoustic Supplies Limited
Technical Data Sheet
Noise Blocker Panels
JCW Acoustic Supplies Limited
Acoustic Ceiling Insulation Panels for Suspended Ceilings. Ideal for assisting in reduction of room to room noise scenarios where suspended ceilings are used beneath a structural ceiling. Used where internal walls are constructed beneath the ceiling grid.
Cost effective solution
Showing 1-36 of 44