Default
Showing 37-52 of 52
Metal roof and cladding coating using Liqausil's BBA Approved Metalseal
Liquasil Ltd
Metalseal 20 was specified to re-brand a small industrial estate in Swindon.
Roofs and external cladding were all stripped of existing finishes using vapour blasting.
Cut edge corrosion was treated using SWT Primer and all metal surfaces were coated with BBA Approved Metalseal 20 roof & cladding coating.
The finish is now graffiti proof, with any graffiti simply washing off with water, with no ghosting residue.
The project is covered by the unique Liquasil latent defects insurance guarantee (including cover for professional design).
Metal Roof Coating & Liquid Gutter Liner, Oxfordshire
Liquasil Ltd
This is a metal roof coating & liquid gutter lining project carried out at Oxford Brookes University.
The roof was power washed and the gutters cleaned before application.
The gutters were treated with Liquasil's rust primer to prevent further rusting, before the seamless, silicone Gutterseal system was applied.
The roof was coated with a single coat of Metalseal 20 in Goosewing Grey.
Metal roof coating & liquid gutter lining Derbyshire
Liquasil Ltd
This project in Derbyshire involved treating cut edge corrosion, re-coating the roof and lining the gutters.
Products used were
* Metalaseal BBA Approved metal roof coating system
* SWT Primer (to treat rust in the gutters and cut edges)
* Liquasil One and Non-Sag Sealer to line the gutters.
The project is covered by the unique Liquasil Latent Defects Guarantee, which is written specifically for Liquasil and underwritten by an A-Rated, Lloyds of London insurer.
Metal roof coating and liquid gutter liner
Liquasil Ltd
The metal roof was first prepared using high powered jet washing equipment, to remove loose and flaking materials.
Liquasil corrosion primer was applied to the corroded cut edges and the entire roof was sprayed with a single coat of Metalseal 20.
The metal box gutter was heavily corroded.
The loose and flaking material was removed and Liquasil’s Corrosion Primer was applied all along the gutter.
The joints in the gutter were sealed with Liquasil’s unique Non-Sag Sealer and then the entire gutter was coated with Liquasil One to provide a seamless gutter finish.
Metal Roof Coating in Suffolk
Liquasil Ltd
The original factory finish to the metal roof of this property was failing, with the coating delaminating badly due to UV damage.
The gutterless eaves construction meant that both the roofs and cladding had to be coated.
Metalseal was specified because it is available in any RAL colour., In this case, Juniper Green was required.
The original finish was removed with 4000psi pressure washers , before corrosion was treated with Liquasil's corrosion primer before Metalseal 20 was applied.
Metal roof coating project in Leicestershire
Liquasil Ltd
Failing factory finishes and cut edge corrosion were present across the entire roof and Liquasil's Metalseal metal roof coating system was specified as the most appropriate solution.
The roof was cleaned and all failing finishes and rust was removed as far as reasonably practicable.
The roof was then coated. In this case, two colours were employed.
Liquasil is the only company able to produce silicone coatings in any RAL colour.
Metal Roof Coating Project in Middlesex
Liquasil Ltd
After first cleaning the roof and attending to rusted areas with Liquasil’s corrosion primer, it was the coated with Metalseal 20 from Liquasil, using airless spray equipment.
The specification for this roof was for a special RAL colour.
Only Liquasil can make silicone coatings in any RAL colour, so Metalseal 20 was specified for the project.
This roof was completed in Forest Green.
Metal Roof Coating Project using BBA Approved Metalseal 20 from Liquasil
Liquasil Ltd
This is an installation of the BBA Approved Metalseal metal roof coating system from Liquasil Ltd.
The project is in North Shields and involved removing the delaminating factory finish, treating the cut edge corrosion and then coating the whole roof in Metalseal 20, in Goosewing Grey.
Metal roof coating project, Milton Keynes
Liquasil Ltd
This 10,000 sq metre roof was in need of complete refurbishment and Liquasil's Metalseal was specified because it provided all parties with complete protection, with a Latent Defects Insurance Guarantee being provided upon completion.
Cut edge corrosion was treated and the roof cleaned prior to the application of the single-coat Metalseal 20.
The unique Liquasil Latent Defects Guarantee covers safe access, workmanship, materials and specifier's professional management fees, along with Professional Design.
BBA Approval adds even more reassurance to the specifier.
Metal roof coating with BBA Approved Metalseal from Liquasil
Liquasil Ltd
The existing factory finish to this metal roof was degraded and failing in multiple places.
The roof was cleaned and all existing GRP roof lights were replaced.
Cut edge corrosion & spot rust was treated using Liquasil corrosion primer.
An initial coat of Metalseal 20 was roller applied to all corrosion treated areas, followed by a single coat of Metalseal 20, spray applied to the entire roof area.
The end result looks like a new roof and will easily provide 20 years protective, water resistant finish to this once poor roof.
Metal roof coating, Watford
Liquasil Ltd
A roof at teh Jaguar Land Rover premises in Watford was in poor condition and suffering from cut edge corrosion.
All of the loose and flaking factory finish was removed using 4000psi pressure washers and the rusted end and mid-laps were ground back to remove the rust.
The cut edge corrosion was treated with Liquasil's corrosion primer and the entire roof was coated using the BBA Approved Metalseal.
Metal Roof Refurbishment Project Using BBA Approved Metalseal by Liquasil ltd
Liquasil Ltd
This is a metal roof coating & refurbishment project using Liquasil's BBA Approved Metalseal 20.
The project involved removing an existing cut edge corrosion treatment and re-treating with Liquasil SWT Corrosion Primer, followed by two coats of Metalseal.
The whole roof was then coated with Metalseal 20 to provide long term protection against fungal growth and weathering.
The unique 10 year, single-point latent defects insurance guarantee was issued at the end of the project.
For details, speak to our building surveyors on 0121 709 5352
Metal roof renovation project using Liquasil's BBA Approved Metalseal coating system
Liquasil Ltd
The former ToysRUs premises in Luton required complete refurbishment and part of the project involved renovation of the metal roof.
Liquasil's BBA Approved Metalseal 20 system was specified because it includes the advanced, SWT Primer to treat cut edge and spot corrosion in-situ.
The metal gutters were lined with Liquasil's Gutterseal, seamless liquid gutter lining system.
Upon completion of the metal roof coating project, the unique, Liquasil Latent Defects Insurance Guarantee was issued.
The Liquasil guarantee includes cover for Professional Design, meaning that you can specify Liquasil products with 100% confidence.
Metalseal metal roof coating installation
Liquasil Ltd
Metalseal 20 was specified as part of an industrial unit refurbishment project.
Metalseal is the only BBA Approved metal roof coating on the market and the only one to come with a Latent Defects Insurance Guarantee.
This is a single coat application, in this case, using brush and roller to avoid the risk of over-spray which can occur when using airless spray equipment.
Roof Coating - Flat Roof Waterproofing, BBA Approved
Liquasil Ltd
Liquasil Ultra PU is a BBA approved flat roof waterproofing membrane.
Cold-applied, the system comprises an embedment coat, into which a chopped strand reinforcement mat is laid to provide exceptional strength.
The mat dissolves and allows for hand-moulding around difficult details.
Once cured, the Liquasil PU UV coat is applied to provide additional strength, durability & protection.
The completed system comes with the unique Latent Defects Insurance Guarantee, which provides cover for Professional Design.
Specify with 100% confidence. Made in the UK.
Seamless Liquid Gutter Lining System by Liquasil Ltd
Liquasil Ltd
Liquasil's liquid gutter lining system is designed by Chartered Building Surveyors to produce a seamless & flexible finish to the most complex of commercial and industrial building gutters.
This liquid gutter lining system goes where physical liners just can't go - around corners, up walls and into the most complex details, completely seamlessly.
The unique Liquasil 10 year latent defects insurance guarantee is provided as standard on most projects.
Showing 37-52 of 52