A-Z
Showing 1-33 of 33
PROBAND 150 and 250
Progress Profiles
PROBAND 150 / 250 is a exible tape in
polyethylene covered on both sides with a
thermo-welded non-woven polypropylene
fabric. The non-woven polypropylene fabric
ensures the adhesion of the tape to the
membranes and the ceramic and natural
stone tiles.
PRODUCT PLUS
• High elasticity
• Waterproof
• Easy to install
PROBAND FIX
Progress Profiles
PROBAND FIX is a moisture-cure sealant
with high adhesion and elasticity,
available in white and grey colour. It is
suitable for the installation of PROBAND
150 / 250 onto non-absorbent wall
surfaces such as PVC, wood, polycarbonate,
glass, plastic and metal. It can be
also used, using PROBAND 150 / 250, to
waterproof the junction between two
adjacent rolls of PROFOIL in swimming
pools and water tanks and to seal the
joint between tiles and edging pro les of
the PROTERRACE line.
PROBAND FIX is a stable compound and
guarantees the sealing of absorbent
materials such as marble and natural
stone.
PROBAND KOLL
Progress Profiles
PROBAND KOLL is a ready-to-use
single-component organic sealant to
waterproof, using PROBAND 150, the
joints between adjacent sheets and the
wall-to- oor connections of PRODESO.
PROBAND KOLL is a very ne red colored
paste with high workability and very low
volatile organic compound emission which
ensures the waterproo ng using
PROBAND 150.
PROBAND KOLL AB
Progress Profiles
PROBAND KOLL AB is a bi-component
sealant-adhesive, with a cementitious
binder-based on ne-grained aggregates
and synthetic polymers with water dispersion.
Using PROBAND 150 / 250, it guarantees
a waterproof joint between the
adjacent sheets and on the wall to oor
connection using our PRODESO membrane
range.
PROBAND KOLL AB is a very ne red blend
with plastic consistency, with high workability
and waterproo ng.
It ensures a high adhesion of PROBAND
150/250.
PRODUCT PLUS
• Suitable for indoor and outdoor
applications
• Compatible with cement based
adhesives
• High chemical stability
• Bi-component easy to identify
Prodeso
Progress Profiles
PRODESO is a low-density polyethylene
membrane with pyramidal cavities with
round bases. On the back it has a non-woven
thermo-welded polypropylene fabric that
guarantees the adhesion with the adhesive.
On top the membrane has a non-woven
thermo-welded polypropylene fabric that
adheres to its surface and guarantees the tile
adhesion.
PRODESO is a waterproo ng and uncoupling
membrane, with a thickness of 3.5 mm.
Using PRODESO it is possible to go over the
expansion joints in the screed before the
installation of ceramic and natural stones.
PRODESO ensures the installation of all
ooring and waterproo ng also with cracked
and not perfectly cured substrates with
vapor pressure and old tiles.
Prodeso Drain 4 EN
Progress Profiles
PRODESO DRAIN 4 is a draining, uncoupling
membrane that allows the heat distribution,
composed of a high-density polyethylene
(HDPE) sheet, a non-woven polypropylene
fabric permeable to water and a polypropylene
non-woven fabric. The cyan polyethylene
sheet, 4 mm in height, is equipped with
square studs, on which a water-permeable
non-woven polypropylene fabric is
thermo-welded. Below, the membrane is
completed with a polypropylene non-woven
fabric, that ensures the membrane gluing to
the support.
PRODESO DRAIN 4 is a draining and uncoupling
membrane that guarantees the vapour
management and the heat distribution.
Using PRODESO DRAIN 4 it is possible to go
over the expansion joints in the screed
before the installation of ceramic and natural
stones.
Prodeso Drain 8 EN
Progress Profiles
PRODESO DRAIN 8 is a draining, waterproofing and uncoupling membrane composed
of a high-density polyethylene (HDPE) sheet,
a non-woven draining polypropylene fabric
and a polypropylene non-woven fabric. The
cyan polyethylene sheet is 8 mm in height
and with truncated conical studs with a
circular base on which a draining non-woven
polypropylene white fabric is thermo-welded.
Below the membrane has a polypropylene
non-woven fabric glued to the polyethylene.
The non-woven fabric guarantees
bonding to the support and is waterproofed
for 15 cm on one side using a polypropylene
film. It extends by about 7.5 cm beyond the
polyethylene sheet.
PRODESO DRAIN 8 is a draining, waterproofing, uncoupling membrane, which guarantees
the vapour management with a
thickness of 8 mm.
Prodeso Eco
Progress Profiles
PRODESO ECO is an uncoupling and waterproo
ng membrane composed of a high-density
polyethylene (HDPE) sheet and a non-woven
polypropylene fabric. The cyan polyethylene
sheet is equipped with square dovetails
shaped studs 3,5 mm height and below with a
thermo-welded polypropylene non-woven
fabric, that ensures the membrane gluing to
the support.
PRODESO ECO guarantees the vapour management
and the heat distribution. Using
PRODESO ECO it is possible to go over the
expansion joints in the screed before the
installation of ceramic and natural stones.
PRODESO ECO guarantees the ooring installation
even on old ooring, cracked and not
perfectly cured substrates and therefore with
possible vapour pressure.
Prodeso Eco Stick
Progress Profiles
PRODESO ECO STICKk of the membrane is a
layer of adhesive, protected with a silicone
lm, so it adheres to the support.
PRODESO ECO STICK guarantees the vapour
management and the heat distribution. Using
PRODESO ECO STICK it is possible to go over
the expansion joints in the support before the
installation of ceramic and natural stones.
PRODESO ECO STICK guarantees the ooring
installation even on old ooring and cracked
substrates.
Prodeso Heat Grip 5
Progress Profiles
PRODESO HEAT GRIP 5 is a polyethylene
embrane with rounded square shaped reliefs
that form channels specially designed to
embed and fasten the electric heating
cables. On the back a non-woven polypropylene
fabric is thermo-welded to ensures the
membrane fixing to the support. The
rounded square shaped reliefs, interconnected
between them by small channels to
ensure the vapour management, are equipped
with circular cavities that transfer the
loads from the flooring to the support. On
the wall of each circular cavity there are four
rectangular-shape holes that guarantee a
better mechanical grip of the adhesive, and
then increase the flooring tensile strength.
PRODESO HEAT GRIP 5 is an uncoupling,
waterproofing and vapour management
membrane, with a thickness of 5.5 mm.
Prodeso Heat Grip 5 Stick
Progress Profiles
PRODESO HEAT GRIP 5 STICK is a polyethylene
membrane with rounded square shaped
reliefs that form channels specially designed
to embed and fasten the electric heating
cables. On the back of the membrane a layer
of PSA adhesive is applied to ensure its fixing
to the support. The adhesive is protected
using a white silicone film. The cavities of the
reliefs filled of adhesive, transfer the loads
from the flooring to the support.
PRODESO HEAT GRIP 5 STICK is an uncoupling
and waterproofing membrane for
indoor applications, with a thickness of 5,5
mm that guarantees the installation of any
flooring and the waterproofing on cracked
and moisture sensitive substrates.
PRODESO MEMBRANE WARRANTY
Progress Profiles
WARRANTY DOCUMENT
Prodeso Sound
Progress Profiles
PRODESO SOUND is a membrane in high
density polyethylene. It is covered on top
with a polypropylene spunbonded and on
the back with a non-woven fabric in
polypropylene. Both are thermo-welded to
the polyethylene sheet to guarantee the tiles
and the membrane adhesion.
PRODESO SOUND is an uncoupling and foot
fall insulation membrane, with a thickness of
2,3 mm, which does not require expansion
joints in the support before tiling using
ceramic or natural stone.
PRODESO SOUND guarantees the foot fall
insulation and the indoor installation of any
flooring, even on problematic supports and
old tiles.
PRODESO SOUND
Progress Profiles
PRODESO SOUND CATALOGUE PAGE
PRODESO SOUND TEST
Progress Profiles
Prodeso Sound Test
PROFILE WARRANTY
Progress Profiles
WARRANTY
PROFOIL PANEL
Progress Profiles
PROFOIL PANEL are extruded polystyrene
panels provided on both sides with a
waterproof membrane. The waterproof
membrane and the adhesive used for its
fixing stiffen the panels that allow to work
quickly and economically.
Profoil Panel Niche
Progress Profiles
PROFOIL PANEL NICHE are recessed niches
made of extruded polystyrene panels coated
on both sides with a water- and steamproof
membrane making them very rigid and
resistant.
MATERIAL
PROFOIL PANEL NICHE are niches made of
extruded polystyrene panels coated on both
sides with a water- and steamproof membrane
making them very rigid and resistant. The
panels, with a thickness of 12.7 mm, are
designed and tested for strength and durability
and are suitable as a support for laying
tiles. PROFOIL PANEL NICHE allows you to
make recessed niches of quick installation
and at reasonable price.
PROFOIL PANEL WARRANTY
Progress Profiles
WARRANTY DOCUMENT PROFOIL PANEL
Profoil PRO
Progress Profiles
PROFOIL PRO is a exible membrane in
polyethylene, with a non-woven polypropylene
fabric on both sides. This non-woven
polypropylene fabric provides a strong
bond of the ceramic tile or natural stone to
the substrate below.
PROFOIL PRO is a flexible and waterproo-
fing membrane, with a thickness of 415 μm.
It could be installed on every flooring and
covering.
PROFOIL PRO guarantees the waterproo-
fing in any environments in direct contact
with water such as swimming pools, bathrooms
and kitchens, and with high vapour
tension such as spas and wellness centers.
PROFOIL PRO WARRANTY
Progress Profiles
WARRANTY DOCUMENT FOR PROFOIL PRO
PROLISTEL CHANNEL
Progress Profiles
PROSHOWER BASE BASIC
Progress Profiles
PROSHOWER BASE L
Progress Profiles
PROSHOWER LATERAL DRAIN KIT
Progress Profiles
PROSHOWER PANEL
Progress Profiles
PROSHOWER PROFILE
Progress Profiles
PROSHOWER PROFILE FRONT
Progress Profiles
PROSHOWER PROFILE GLASS
Progress Profiles
PROSHOWER PROFILE WALL
Progress Profiles
PROSHOWER VERTICAL DRAIN KIT
Progress Profiles
TEST FOR PRFOIL PANEL
Progress Profiles
TEST RESULT OF PROFOIL PANEL
TEST RESULT
Progress Profiles
TEST RESULT FOR PRODESO MEMBRANE PROBAND KOLL
Showing 1-33 of 33