A-Z
Showing 1-22 of 22
6IE Installation Manual
Warmup plc
6IE Technical Specification
Warmup plc
Clypso Installation Manual
Warmup plc
Clypso Technical Specification
Warmup plc
The Warmup Clypso System is designed for use within
floating screeded floors. Clypso can be installed under
either 65 - 75 mm sand and cement screed or proprietary
screeds down to 35 mm thick.
The system comprises of 16 mm PE-RT pipe that is held
in place by Warmup clips secured to the insulation layer
below.
A gridded membrane is available from Warmup to make
quick and accurate fixing easier to achieve.
Warmup clips are available in two lengths, 40 & 60 mm. The
60 mm clip offers greater fixing strength while the 40 mm
clip only requires a 25 mm layer of insulation making them
well suited for intermediate floors.
The Warmup Clypso System is suitable for almost any floor
finish and in particular where the flooring may be replaced
from time to time.
DCM-PRO Technical Specification
Warmup plc
DCM-PRO is an electric UFH system providing anti-fracture protection to tiled floor finishes. There are two decoupling mats within the range; one backed with non-woven fleece, the other a peel and stick adhesive. They provide a versatile solution for any heated floor, with peel and stick ideal for smooth subfloors, while fleece is more suited to damp surfaces. When not used beneath a tile floor finish, covering the fleece mat with 10 mm of levelling compound allows a variety of floor coverings to be laid over. There are 10 installable system powers, using standard and low wattage cables, making DCM-PRO effective for energy efficient modern properties and older ones with high energy requirements; unique castellations allow the cable to be spaced precisely achieving the intended power.
Element Thermostat Technical Specification
Warmup plc
IEC 60800:2009 Certificate (WFP)
Warmup plc
IEC 60800:2009 Certificate (WSM)
Warmup plc
IEC 60800:2009 Certificate (WSMAP)
Warmup plc
IEC 60800:2009 Certificate (WSR)
Warmup plc
Inscreed Technical Specification
Warmup plc
Inscreed Cable is an electric underfloor heating system designed for use within a screeded floor construction. Variable spacing of cable available during design and installation allows the system power to be tailored to the property's requirements.
Screeded heating systems have slower heat up and cool down times due to screed depths used, making them ideal systems
for rooms in constant use.
The screed can be used as a form of storage heating, making use of its long heat retention for an efficient and cost effective solution.
Inscreed cable is suitable for almost any floor finish and in particular where the flooring may be replaced from time to time, because the system is safely embedded in screed, meaning there is less risk of damaging the heating cable if the floor covering is changed.
Intertek BEAB Mark Certificate (Programmable Termostat)
Warmup plc
Intertek BEAB Mark Certificate (Underfloor heating element)
Warmup plc
Intertek BEAB Mark Certificate (Underfloor Heating System for Wood or Laminate Floors)
Warmup plc
Intertek BEAB Mark Certificate (Undertile heating system)
Warmup plc
ISO 9001:2015 Certificate
Warmup plc
Konekt Thermostat Speicification Sheet
Warmup plc
Nexxa 12 Installation Manual
Warmup plc
StickyMat Technical Specification Sheet
Warmup plc
Warmup StickyMat System is designed for use within the adhesive layer under tiles or within a levelling compound under other floor finishes. The fixed spacing and self-adhesive mat makes installation of regularly shaped rooms quick and easy whilst ensuring precision is
maintained.
The pressure sensitive adhesive binds the mats to the floor, keeping them flat and ensuring the application of tile adhesive is snag free whilst allowing the mats to be easily repositioned as needed.
The ultra-thin, multi-strand, dual core heating cable, is
double insulated with an advanced fluoropolymer making
it exceptionally tough and easy to tile over. For all compatible UFH surfaces, the system can be covered with a levelling compound to provide a flat floor surface.
VLo Econna-12 Joisted System
Warmup plc
The VLo Econna-12 is designed for use over both battened and joisted floors leaving the void between them free for other services. The Econna-12 system is ideal for new and old floors alike but when planning to refurbish an existing floor it can be difficult to know what you will find without lifting the floor up first. The Econna-12 system is simply installed over the unknown in place of a standard floor deck rather than competing for space with the other services within the void beneath. Econna boards have built in diffusers for quick and easy installation, providing even heat distribution across the entire floor. ‘’Fluted’ exit on panel edges to ensure an easy transition into the neighbouring panel - for a quicker and simpler installation.
VLo Nexxa 12 Technical Specification
Warmup plc
Warmup Nexxa-12 is a lightweight and flexible
self-adhesive underfloor heating installation system.
Developed to secure 12mm pipe for even temperature
distribution, the system can be fitted by a single installer
and allows for lateral and diagonal pipe spacing.
The compact design ensures a low floor finish, making it ideal for retrofit or new builds. Suitable underneath all flooring types, the panels require no overboarding whilst covering irregular surfaces better thanks to their flexibility.
Made from environmentally friendly polystyrene, easily recycled in a carbon neutral factory, the panel can be cut to size and placed around obstacles due to its regular pipe spacing design. The panels are inter-locked creating a continuous layer across the floor ensuring a seamless flow of heat.
VLo Ultra-12 Low Build System Technical Specification
Warmup plc
The VLo Ultra-12 is a lightweight and robust underfloor heating system from Warmup. The range comprises of 5 panels maximising usability for the installer, each panel designed to hold the pipe securely across the floor.
Designed for use with Warmup's 12mm PE-RT pipe which inserts directly into the board channels for swift installation, the system has been created with efficiency in mind.
The straight panel with omega profiled 150µm aluminium
diffuser channels ensures maximum surface contact
between the diffuser and PE-RT pipe; optimising heat output, reducing heat up times whilst also minimising heat loss through increased insulation.
The aluminium surface of the heating panels is covered
with a securely bonded, fibreglass reinforced fleece, providing an ideal surface for tiling.
Showing 1-22 of 22