Compare

AIRTRAK® PE Pitched Eaves Ventilators - Roof Ventilation System

Name: AIRTRAK® PE Pitched Eaves Ventilators - Roof Ventilation System
Brand: Nicholson STS Ltd
SKU: R7T2J44ruq8HXqEzsTQ6o

Verified by manufacturer 20 days ago

Airtrak PE100 Pitched Eaves Ventilator

Nicholson STS Ltd

Third party certifications:

ISO 9001 Quality Management
Certificate type

Provides an unobtrusive ventilation path into the roof void at the bottom of a pitched roof slope.

Jump to:

+44 (0) 1763 295828 Website

Application

Suitable for providing ventilation in metal, membrane and liquid roof coverings.
E Version: For increased resistance to both wind uplift in exposed locations and corrosion in coastal locations, the ventilator can be supplied in 1.0 mm-thick, 316 grade stainless steel. Where extreme weather conditions are likely, consideration should be given to providing more weathering cover to upstands and slating or tiling to improve the integrity of the detail.
FR Version: To reduce spread of fire through ventilation apertures, the ventilator can be supplied with an intumescent seal.

Note: Standard AIRTRAK® details assume moderate weather conditions. Small amounts of moisture may be admitted under heavy storm conditions. Where more severe weather conditions are likely, consideration should be given to increasing the vertical overlap dimension to upstands and to slating or tiling to improve the integrity of the weathering detail. For slate and tile details the manufacturer also recommends the use of the AIRTRAK® LPS where appropriate. Contact manufacturer for further technical help.

Description

Provides an unobtrusive ventilation path into the roof void at the bottom of a pitched roof slope.

Features and benefits:

After installation, the ventilator is covered by the flashing or roofing material.
Available in different downstand dimensions.
Supplied pre-bent to a specified angle.
Can be combined with AIRTRAK® CF ClipFast clips where it is possible that the flashing might slip off the ventilator over time and the welt disengage from the lower edge.

General information

Color	Black Grey Silver
Finish	Metallic
Material	Stainless steel Glass Reinforced Plastic (GRP) Guidance for specification option: Insect mesh.
Shape	Rectangle
Length	1000 mm
Width	125 mm 145 mm 180 mm Manufacturer guidance Overall girth.
Warranty description	Ten year

Uniclass	Pr_30_59_29_02 Abutment ventilatorsPrimary
CAWS	H60/72 Top edge ventilated abutments H60/675 Top edge ventilated abutments J41/80 Roof ventilators J41/485 Roof ventilators

Specification data - Abutment ventilators

Ventilation opening	25 mm continuous air gap equivalent.
Colour	Stainless steel.

Type	Standard.
Grade	304.
Dimensions	1000 x 125 mm. Guidance for specification option: Unit length x overall girth. Downstand: 100 mm.
Pitch	Guidance for specification option: Insert requirement.
Airtrak CF ClipFast fixing clips	Not required. Airtrak CF ClipFast clips, stainless steel. Guidance for specification option: 70 x 60 mm, 0.6 mm thickness. Airtrak CF ClipFast clips, copper. Guidance for specification option: 70 x 60 mm, 0.5 mm thickness. Manufacturer guidance Fixing clip for securing lead flashings to the Airtrak ventilators to prevent flashing creep over time. Clips locate in the slots found in the lower edge of the ventilator; these slots are spaced at approximately 330 mm centres.

Sustainability data

Contains Red List materials	No
Country of material origin	United Kingdom
Country of product manufacture	United Kingdom
Material	Stainless steel Glass Reinforced Plastic (GRP) Guidance for specification option: Insect mesh.
Recyclability	Recyclable at end of life
Recycled content As defined in clause 7.8 of BS EN ISO 14021	50 %