Ventilation and ducting
Ventilation includes a range of ventilator requirements such as roof ventilators, wall grilles, extract hoods, etc. Browse products for Ventilation and ducting below.
Can't find what you're looking for?
Recently verified
Showing 1-36 of 301
AIRTRAK® PRV Pitched Roof Ventilator - Roof Ventilation System
Verified 3 days ago
Nicholson STS Ltd
Provides point ventilation to lead roofs and vertical cladding where appropriate.
AIRTRAK® AB6 Abutment Ventilator - Roof Ventilation System
Verified 3 days ago
Nicholson STS Ltd
Ventilator for use at a parapet wall abutment.
AIRTRAK® PV Pitched Valley Ventilators - Roof Ventilation System
Verified 3 days ago
Nicholson STS Ltd
Provides continuous ventilation detail to a pitched valley between two roof pitches.
AIRTRAK® LB Layboard Ventilators - Roof Ventilation System
Verified 3 days ago
Nicholson STS Ltd
Range of ventilators providing 25 mm ventilation over the layboard into the roof void.
AIRTRAK® EC Eaves Carrier - Roof Ventilation System
Verified 3 days ago
Nicholson STS Ltd
Support profile to prevent ponding at eaves caused by a backfall in the roof underlay membrane.
AIRTRAK® PE Pitched Eaves Ventilators - Roof Ventilation System
Verified 3 days ago
Nicholson STS Ltd
Provides an unobtrusive ventilation path into the roof void at the bottom of a pitched roof slope.
AIRTRAK® SLV Slate Ventilator - Roof Ventilation System
Verified 3 days ago
Nicholson STS Ltd
Low profile roof ventilator.
AIRTRAK® AB1 Abutment Ventilator - Roof Ventilation System
Verified 3 days ago
Nicholson STS Ltd
Abutment ventilator for fully supported metal, membrane and liquid applied roofing.
AIRTRAK® AB2 Abutment Ventilator - Roof Ventilation System
Verified 3 days ago
Nicholson STS Ltd
Abutment ventilator for built-up bitumen roofing.
AIRTRAK® VT Ventilated Edge Trim - Roof Ventilation System
Verified 3 days ago
Nicholson STS Ltd
Provides a continuous ventilation detail to the bottom edge of a plywood fascia or cladding.
AIRTRAK® F10/ F25 Fascia Ventilators - Roof Ventilation System
Verified 3 days ago
Nicholson STS Ltd
Provides ventilation to the roof void over the eaves fascia board.
AIRTRAK® RV Roll Vent - Roof Ventilation System
Verified 3 days ago
Nicholson STS Ltd
Roll ventilator designed to ensure that the airpath at the eaves is unobstructed by the insulation where it sits above the wall plate.
AIRTRAK® RTV Ridge Tile Ventilator - Roof Ventilation System
Verified 3 days ago
Nicholson STS Ltd
Provides ventilation of most ridge tiles using traditional wet laid methods.
AIRTRAK® MV Mansard Ventilators - Roof Ventilation System
Verified 3 days ago
Nicholson STS Ltd
Range of mansard ventilators for slate and tile roofing is used to introduce ventilation into a flat roof where it falls out onto a pitched roof.
ROOFPORT® RPV - Roof Void Point Ventilators
Verified 3 days ago
Nicholson STS Ltd
Roof void point ventilators with an integral fly screen mesh, and a ventilation area of 15 000 or 30 000 mm².
AIRTRAK® IL Inline Ventilators - Roof Ventilation System
Verified 3 days ago
Nicholson STS Ltd
Inline ventilators for use at the foot or head of vertical or pitched cladding to provide a continuous airgap for ventilation.
AIRTRAK® VR Ventilated Ridge - Roof Ventilation System
Verified 3 days ago
Nicholson STS Ltd
Introduces ventilation at the head of slated or tiled pitch where it reaches the ridge.
AIRTRAK® VA Ventilated Apron - Roof Ventilation System
Verified 3 days ago
Nicholson STS Ltd
Introduces ventilation at the head of slated or tiled pitch where the roof meets an abutment wall.
AIRTRAK® LV Lead Roof Ventilators - Roof Ventilation System
Verified 3 days ago
Nicholson STS Ltd
Range of compact point ventilators for flat or pitched lead covered roofs up to 30°.
AIRTRAK® CP Change of Pitch Ventilator - Roof Ventilation System
Verified 3 days ago
Nicholson STS Ltd
Provides ventilation at the change of pitch in a slated or tiled mansard roof.
AIRTRAK® CL Cladding Ventilator - Roof Ventilation System
Verified 3 days ago
Nicholson STS Ltd
Provides ventilation into metal cladding from 60° pitch to vertical.
AIRTRAK® BRV Between Roll Ventilators - Roof Ventilation System
Verified 3 days ago
Nicholson STS Ltd
Range of between-roll ventilators for lead ridge details.
AIRTRAK® AB3 Abutment Ventilator - Roof Ventilation System
Verified 3 days ago
Nicholson STS Ltd
Abutment ventilator for mastic asphalt (vertical kerb).
AIRTRAK® AB5 Abutment Ventilator - Roof Ventilation System
Verified 3 days ago
Nicholson STS Ltd
Abutment ventilator for hard metal roofing.
AIRTRAK® CV Cheek Ventilator - Roof Ventilation System
Verified 3 days ago
Nicholson STS Ltd
Provides ventilation into vertical lead cladding.
AIRTRAK® CS Comb Strip - Roof Ventilation System
Verified 3 days ago
Nicholson STS Ltd
Comb strip designed to prevent the entry of birds and vermin into the batten void beneath profiled tiles at the eaves.
AIRTRAK® EA Eaves Ventilators - Roof Ventilation System
Verified 3 days ago
Nicholson STS Ltd
A range of profiles that provide a 25 mm ventilation path into the roof void at the eaves or edge of a flat roof.
AIRTRAK® AB4 Abutment Ventilator - Stainless steel linear ventilator
Verified 3 days ago
Nicholson STS Ltd
Abutment ventilator for mastic asphalt (splayed kerb).
Bauder SVP Cover
Verified 4 days ago
Bauder Ltd
Flat roof soil vent pipe covers.
Glidevale Protect MV253 Vent Pipe Adaptor - Underfloor Ventilation
Verified 5 days ago
BPD Building Product Design Ltd
Vent pipe adaptor.
Glidevale Protect Fresh 80 dB Acoustic Wall Ventilator - Through Wall Vent
Verified 5 days ago
BPD Building Product Design Ltd
Non-electric acoustic through wall vent provides controllable background ventilation
Glidevale Protect MV254 Vertical Adaptor - Underfloor Ventilation
Verified 5 days ago
BPD Building Product Design Ltd
Vertical adapter to increase depth of the MV251 Periscope where ventilating a sub floor void.
Glidevale Protect Fresh TLF-dB Acoustic Wall Ventilator - Through Wall Vent
Verified 5 days ago
BPD Building Product Design Ltd
Non-electric acoustic through wall vent provides controllable background ventilation.
Glidevale Protect MV255 Straight Sleeve - Underfloor ventilation
Verified 5 days ago
BPD Building Product Design Ltd
Straight cavity sleeve attaches to the MV250 Airbrick to ventilate the subfloor void.
Glidevale Protect MV251 Periscope - Underfloor Ventilation
Verified 5 days ago
BPD Building Product Design Ltd
Provides ventilation beneath suspended floors.
Glidevale Protect Fresh 80 Wall Ventilator - Through Wall Vent
Verified 5 days ago
BPD Building Product Design Ltd
Non-electric through wall vent provides controllable background ventilation
Showing 1-36 of 301