AIRTRAK® PE Pitched Eaves Ventilators - Roof Ventilation System
Verified by manufacturer 14 days ago
Airtrak PE120-FR Pitched Eaves Ventilator
Airtrak PE120-FR Pitched Eaves Ventilator
ISO 9001 Quality Management
Certificate type
Provides an unobtrusive ventilation path into the roof void at the bottom of a pitched roof slope.
Application
- Suitable for providing ventilation in metal, membrane and liquid roof coverings.
- E Version: For increased resistance to both wind uplift in exposed locations and corrosion in coastal locations, the ventilator can be supplied in 1.0 mm-thick, 316 grade stainless steel. Where extreme weather conditions are likely, consideration should be given to providing more weathering cover to upstands and slating or tiling to improve the integrity of the detail.
- FR Version: To reduce spread of fire through ventilation apertures, the ventilator can be supplied with an intumescent seal.
Note: Standard AIRTRAK® details assume moderate weather conditions. Small amounts of moisture may be admitted under heavy storm conditions. Where more severe weather conditions are likely, consideration should be given to increasing the vertical overlap dimension to upstands and to slating or tiling to improve the integrity of the weathering detail. For slate and tile details the manufacturer also recommends the use of the AIRTRAK® LPS where appropriate. Contact manufacturer for further technical help.
Description
Provides an unobtrusive ventilation path into the roof void at the bottom of a pitched roof slope.
Features and benefits:
- After installation, the ventilator is covered by the flashing or roofing material.
- Available in different downstand dimensions.
- Supplied pre-bent to a specified angle.
- Can be combined with AIRTRAK® CF ClipFast clips where it is possible that the flashing might slip off the ventilator over time and the welt disengage from the lower edge.
General information
Color | Black Grey Silver |
Finish | Metallic |
Material | Stainless steel Glass Reinforced Plastic (GRP) Guidance for specification option: Insect mesh. |
Shape | Rectangle |
Length | 1000 mm |
Width | 125 mm 145 mm 180 mm Manufacturer guidanceOverall girth. |
Warranty description | Ten year |
Uniclass | |
CAWS | H60/72 Top edge ventilated abutments H60/675 Top edge ventilated abutments J41/80 Roof ventilators J41/485 Roof ventilators |
Specification data - Abutment ventilators
Ventilation opening | 25 mm continuous air gap equivalent. |
Colour | Stainless steel. |
Type | Fire resistant ventilator with intumescent seal. |
Grade | 304. |
Dimensions | 1000 x 145 mm. Guidance for specification option: Unit length x overall girth. Downstand: 120 mm. |
Activation | 180—200°C. |
Expansion | 30:1. |
Pitch | Guidance for specification option: Insert requirement. |
Airtrak CF ClipFast fixing clips | Not required. Airtrak CF ClipFast clips, stainless steel. Guidance for specification option: 70 x 60 mm, 0.6 mm thickness. Airtrak CF ClipFast clips, copper. Guidance for specification option: 70 x 60 mm, 0.5 mm thickness. Manufacturer guidanceFixing clip for securing lead flashings to the Airtrak ventilators to prevent flashing creep over time. Clips locate in the slots found in the lower edge of the ventilator; these slots are spaced at approximately 330 mm centres. |
Sustainability data
Contains Red List materials | No |
Country of material origin | United Kingdom |
Country of product manufacture | United Kingdom |
Material | Stainless steel Glass Reinforced Plastic (GRP) Guidance for specification option: Insect mesh. |
Recyclability | Recyclable at end of life |
Recycled contentAs defined in clause 7.8 of BS EN ISO 14021 | 50 % |
Expected Life | 30 year |
Third party certifications
ISO 9001 Quality Management
Citation
Literature
AIRTRAK Roof Void Ventilation System 2020
AIRTRAK PE100 Technical Data Sheet
AIRTRAK PE120 Tech Data Sheet
AIRTRAK PE100S Tech Data Sheet
AIRTRAK PE100S-CB Tech Data Sheet
Case studies
AIRTRAK™ - St Johns Chapel
AIRTRAK™ - Coal Drops Yard
Clifton Cathedral