NBS Source
I'm a manufacturer

Ali SLIDE Inline Sliding Door

Verified by manufacturer 21 days ago

Senior Architectural Systems Ltd Third party certifications:
  • UKAS

    UKAS

    Certificate type

Ali SLIDE is a slimline, high-performance range of inline aluminum sliding doors with PAS 24 security, designed to fit all budgets and is suitable for both domestic and commercial applications.

Jump to:
+44 (0)1709 772600 Website

Application

Suitable for both domestic and commercial projects.

Description

Ali SLIDE is available as both a Standard version with a 79 mm interlock and as a Slimline version with an interlock of just 50 mm to give maximum daylight and uninterrupted views. Both versions use the same locking hardware, which is why the Slimline version can also achieve PAS 24.


Ali SLIDE doors have a polyamide thermal break to give impressive thermal efficiency with U values as low as 1.64 W/m2K and are fully weather tested.


Construction

Unique jointing method of head and sill allows thermal breaks to always line through with door sash for thermal efficiency

  • Adjustable locking points for easy locking and weatherproof seal
  • Choice of chamfered or square beads, or Mix and Match
  • All hardware is securely fixed into the aluminium profiles, not the thermal break, to avoid thermal bridging and provide a more secure fixing
  • Simple drainage option allows cill to be dropped down to give a lower threshold for easy access


Fabrication and Installation:

  • Constructed using mitred corners with alignment chevrons to assist in clean, accurate mitres
  • No need for complicated drainage preps to outerframe track
  • Mechanical corner cleats for ease of fabrication
  • Punch tool available for help in fabrication
  • Adjustable rollers for quick and easy installation


General information

Finish

Anodized

Guidance for specification option:

To BS3897:1991 to a minimum of 25microns (AA25), supplied in either satin or polished finish in a limited range of colours.

Powder-coated

Guidance for specification option:

To BS EN 12206-1: 2004 Part 1 painted in house. Surface finish at 40 microns standard, or enhanced to 60 microns for marine environments. Available in a wide range of RAL finishes.

Material

Aluminium

Length

Bespoke

Width

Bespoke

Height

Bespoke

Uniclass

Pr_30_59_24_80 Sliding door and partition setsPrimary

CAWS

H11/135 Doors

L20/520 Sliding doors

L20/540 Sliding folding doors

L20/60 Doors

Specification data - Sliding door and partition sets

Performance

External.

Arrangement

Multi-leaf bottom-rolling.

Track system

Single track.

Double track.

Triple track.

Door leaves

-

Finish and colour

Anodized.

Guidance for specification option:

Insert colour requirements, 25 µm (minimum), satin or polished finish available.

Polyester powder coated.

Guidance for specification option:

Insert colour requirements, 40 µm standard and 60 µm available for marine environments.

Operation

Manual.

SecurityRating

Security tested to PAS24:2016, Q-Mark fully Certified.

Watertightness

200 Pa.

Guidance for specification option:

Tested in accordance with BS 6375-1, BS 6375-2 and BS 6375-3 Annex A.

Air permeability

600 Pa.

Guidance for specification option:

Tested in accordance with BS 6375-1, BS 6375-2 and BS 6375-3 Annex A.

Wind resistance

1200 Pa.

Guidance for specification option:

Tested in accordance with BS 6375-1, BS 6375-2 and BS 6375-3 Annex A.

Glazing unit

Double.

Triple.

Sustainability data

Country of product manufacture

United Kingdom

Recyclability

100

Third party certifications

UKAS

UKAS

ISO 14001

UKAS

UKAS

ISO 45001

UKAS

UKAS

ISO 9001

Literature

Introduction to Senior Architectural Systems Brochure

Introduction to Senior Architectural Systems Brochure

SAS BREEAM Brochure

SAS BREEAM Brochure

SAS Featured Projects Brochure

SAS Featured Projects Brochure

SAS Accommodation Brochure

SAS Accommodation Brochure

SAS Commercial Brochure

SAS Commercial Brochure

SAS Education Brochure

SAS Education Brochure