Compare

Anhydrite Liquid Screed - Gypsol HTC - High Strength High-Performance Screed

Name: Anhydrite Liquid Screed - Gypsol HTC - High Strength High-Performance Screed
Brand: LKAB Minerals
SKU: dKywehJ6dpNRdD4iK3Ktrm

Verified by manufacturer 3 months ago

LKAB Minerals

Third party certifications:

BBA Agrément Certificate
Certificate type
EPD
Certificate type

Gypsol HTC is a high strength high-performance screed explicitly designed to enhance the thermal properties of an underfloor heating system.

Jump to:

0800 622 6023 Website

Application

This free-flowing and self-compacting liquid screed produces a highly efficient heating system with a co-efficient of performance some 25% higher than competing sand cement screed systems. The screed is independently third-party verified for the thermal conductivity of up to 2.5 W/mK.

Screed will give you a surface finish which is:

Smooth.
Flat.
Level.

Therefore, it forms a subfloor for tiles, vinyl, laminate, or any other floor covering for internal floors.

Specially trained screeders using specialized equipment pump Gypsol HTC into place. Screed can be applied thinner than other flowing screeds because it requires just a 20 mm cover to any underfloor heating pipes/cables. Improves overall diffusivity and offers unrivaled thermal performance.

Description

Gypsol HTC is specifically formulated for use with underfloor heating and cooling systems. It suitable for both warm water and electric underfloor heating.

Gypsol Binder is an integral component of Gypsol HTC, a screed specially formulated to allow thinner depths than other Gypsol liquid screeds, allowing just a 20 mm cover to heating conduits. Gypsol HTC is designed to offer high thermal performance in conjunction with underfloor heating and cooling systems. Gypsol HTC is suitable for all types of floor covering, including traditional tiles, carpets, vinyl, and wood floors.

Features and benefits:

Rapid application.
Unrivalled thermal performance.
Up to 2.5 W/mK thermal conductivity.
Up to 25% improvement in COP.
Reduced depth.
Reduced operating energy.
Higher output.
Up to 94% lower Carbon Emissions.
Thin Screed sections: 40 mm Floating Commercial, 35 mm Floating Domestic, 30 mm Unbonded, 25 mm Bonded, 20 mm cover to underfloor heating pipes/cables.
Fast drying: 28 days natural drying*, 13 days forced drying*. Is also available in Rapide format for even quicker drying times
Rapid commissioning of underfloor heating: Underfloor heating can be commissioned and run after just seven days.
No reinforcement nor fibres required.
No curing agents required.
Fully self-compacting and high density: Offers 80 kg/m² density at just 40 mm.
Rapid return to service of work areas.
Foot traffic after only 48 hours.
Full loading after just seven days.
Assured high strength: Minimum Ca-C30—F5.

*Independently tested and based on 50 mm depth at 20˚C and 60% RH. Complete test data is available on request.

General information

Color	White
Finish	Smooth
Material	Other Guidance for specification option: Gypsol Screed.
Shape	Formless
Length	Bespoke
Width	Bespoke
Height	25 mm 30 mm 35 mm 40 mm

Uniclass	Pr_35_31_06_77 Screed flooringPrimary
CAWS	K11/295 Floating floor system M12/120 Resin flooring M12/12 Resin flooring M12/35 Coated resin flooring M12/10 Resin flooring M12/110 Resin flooring

Specification data - Screed flooring

Third party product certification	BBA certified.
Colour	Off white.

Appearance	Fluid mortar.
Density	2000 kg/m³ (dry); 2200 kg/m³ (wet).
Strength	C25—F4. Guidance for specification option: Minimum binder content 800 kg/m³. Manufacturer guidance Required strength.
Required Flow	To EN 13454-2, 230—270 mm.
Reaction to fire	Class A1fl Non-Combustible.
Working time	3 hours. Guidance for specification option: Place and finish within 3 hours of batching.
Drying time	24—48 hours (foot traffic); 7 days (loading). Guidance for specification option: Drying (50 mm depth): At 20°C and 60% RH - 28 days Active force drying - 13 days. Can be force dried after 7 days.
ThermalConductivity	Up to 2.5 w/mK.
Depth	Guidance for specification option: Bonded: 25 mm. Unbonded: 30 mm. Floating: 35 mm domestic/ 40 mm commercial. Acoustic 80 kg/m² @ 40 mm. Cover to conduits 20 mm. Prepare the substrate in accordance with BS8204:7:2003 using a gritted two coat epoxy resin DPM or similar. Manufacturer guidance Minimum depth requirements.

Sustainability data

Country of product manufacture	United Kingdom
Embodied carbon A1-A3 (production stage) as defined in BS EN 15804	7.5 kg CO₂ eq/m² Guidance for specification option: Minimum: 6.5 kg/m². Manufacturer guidance Maximum.