Bauder LiquiTEC Cold Roof / Terrace Cold Roof System - Cold Applied

Bauder LiquiPRIME 1.

Guidance for specification option:

A cold liquid-applied, fast-curing primer, for use when installing the Bauder LiquiTEC system over timber and bitumen-based substrates. The product is a poly(methyl methacrylate) (PMMA)-based resin, and requires the addition of a catalyst to trigger curing. It is solvent, isocyanate and halogen-free, minimizing its environmental impact.

• Colour: Clear.
• Coverage: 0.4 kg/m² (minimum).
• Application temperature: 0–35°C.
• Application method: Roller.
• Rainproof time: 30 minutes (approximate).
• Overcoat/ traffic time: 45 minutes (approximate).

Bauder LiquiPRIME 2.

Guidance for specification option:

A cold liquid-applied, fast-curing primer, for use when installing the Bauder LiquiTEC system over brick, block and cementitious-based substrates. The product is a poly(methyl methacrylate) (PMMA)-based resin, and requires the addition of a catalyst to trigger curing. It is solvent, isocyanate and halogen-free, minimizing its environmental impact.

• Colour: Clear.
• Coverage: 0.4 kg/m² (minimum).
• Application temperature: 0–35°C.
• Application method: Roller.
• Rainproof time: 30 minutes (approximate).
• Overcoat/ traffic time: 45 minutes (approximate).

As 'Horizontal work'.

Bauder 110 g/m² reinforcement fleece.

Not required.

Bauder 100/60 GRP Trim Angle.

Guidance for specification option:

GRP roof edge trim for use with Bauder Cold Applied Liquid Waterproofing systems where the system is terminated at perimeter details, such as drip edges, watercheck kerbs or parapets.

• Length: 3 m.
• Face depth: 60 mm.
• Fixing arm: 100 mm.

Note: The trim may be used either way round as required.

• Thickness: 2 mm.
• Colour: Black.
• Installation: 

-  The trims must be bedded in Bauder Sealant and mechanically fixed with corrosion resistant flush headed screws. 

-  Fixings centres must be no greater than 300mm with fixings within 50mm of the ends. In high wind risk areas or above 10m high, fixing centres are to be at no more than 150mm.

-  The new trim must cover any open joint, which may exist between the kerb and the top of the wall by a distance of minimum 20mm.

-  The reinforced Bauder LiquiTEC system is to be dressed over the trim to its full extent and past the edge of the downward facing edge. Once the system has cured, the excess is to be trimmed off to a neat finish.

Bauder Aluminium Termination Bar.

Guidance for specification option:

Natural finish aluminium alternative to a lead counterflashing, for use at upstand details to give protection to the top edge of the waterproofing. It should be restricted to use on upstands where a chase cannot be cut into the wall.

Bauder GRP Termination Bar.

Guidance for specification option:

Black glass-reinforced plastic (GRP) alternative to a lead counterflashing, for use at upstand details to give protection to the top edge of the waterproofing. It should be restricted to use on upstands where a chase cannot be cut into the wall.

Bauder lightning conductors.

Guidance for specification option:

Lightning conductor clips are specially designed, secure clips that allow for movement.

• Bauder Lightning conductor – Type 4: polyvinyl chloride (PVC)-coated or bare conductor.

Bauder LiquiDETAIL.

Guidance for specification option:

Cold liquid-applied, fast-curing waterproofing resin that can be used on upstands and details. PMMA-based resin that requires the addition of catalyst to trigger curing, and is solvent, isocyanate and halogen-free.

Bauder rooflights/ glazing/ ventilation.

Guidance for specification option:

All these glazing products are fully compatible with the roof waterproofing systems. Consult manufacturer for details and insert requirements.

• BauderDOME Rooflight.
• Bauder Euroglaze Rooflight.
• Bauder Special Modular Rooflight.
• Bauder Continuous Rooflight.
• Bauder Walk-on Rooflight.
• Bauder Direct Glazing.
• Bauder AOV.
• Bauder Modular Link Glazing.
• Bauder Structural Rooflight.
• Bauder Fire Rated Rooflight.

Thermofol PVC Rigid Outlet.

Guidance for specification option:

A rigid PVC outlet enabling Themofoil membrane to be welded to the flange plate. UV stable throughout.