Compare

Bauder LiquiTEC Cold Roof / Terrace Cold Roof System - Cold Applied

Name: Bauder LiquiTEC Cold Roof / Terrace Cold Roof System - Cold Applied
Brand: Bauder Ltd
SKU: 7CcpV6GtBbacc7yTxqSsuf

Verified by manufacturer 3 days ago

Bauder Ltd

Product certifications:

BBA Agrément Certificate
Certificate type
EPD
Certificate type

Cold liquid applied, cold roof system suitable for new build, refurbishment and green roof applications.

Jump to:

BOS

+44 (0)1473 257671 Website

Application

Suitable for new build and refurbishment applications.

Description

Cold liquid-applied, cold roof system suitable for new build, refurbishment and green roof applications. It is compatible with most existing waterproofing products, making it suitable for use as an overlay system. The system is appropriate for both new build or refurbishment applications for cold, warm, and inverted roof constructions. The system can be used as exposed roof waterproofing or as a roof terrace when protected by hard landscaping as well as extensive and intensive green roof systems. The system can be used in zero falls applications in protected roof situations.

Plus points:

Totally cold applied minimum 1.8mm dry film thicknesses.
Polyester reinforced wet-on-wet seamless application.
FLL approved root resistance for green roofs.
Suitable for roofs with a high degree of detailing.
Comprehensive range of guarantee packages.

Verified properties:

CCPI Verification 0007700033/1125: this systems CCPI mark provides accuracy of data delivering assurance to specifiers.
BBA Certificate 14/5152
Fire properties – membranes deemed “unrestricted” in certain circumstances as categorised in BBA certificate.
Fire classification BROOF(t4) to BS EN 13501-5 tested to TS 1187 test 4 for external fire exposure on defined permutations of product build up.
Service life > 25 years.
EPD Certification: LiquiTEC products.

General information

Color	Grey Guidance for specification option: LiquiFINISH, Blue grey (RAL 7031). LiquiFINISH, Stone grey (RAL 7030). LiquiFINISH, Traffic grey (RAL 7043). Manufacturer guidance Bauder LiquiDEK is Blue Grey (RAL 7031).
Finish	Smooth
Material	Polymethyl methacrylate (PMMA) Manufacturer guidance Liquid applied polymethyl methacrylate membrane.
Shape	Formless Guidance for specification option: Liquid.
Warranty description	- Manufacturer guidance A comprehensive range of guarantee options are available. Please contact your local Bauder Area Technical Manager for more information.

Uniclass	Ss_30_40_30_40 Liquid-applied cold roof covering systemsPrimary
CAWS	J31/110 Cold deck roof coating J31/5 Cold deck roof coating

Product range	Liquid-applied roof covering system - Cold Applied

Specification data - Liquid-applied cold roof covering systems

Classification data
Preparation	-
Horizontal work	Bauder LiquiPRIME 1. Guidance for specification option: A cold liquid-applied, fast-curing primer, for use when installing the Bauder LiquiTEC system over timber and bitumen-based substrates. The product is a poly(methyl methacrylate) (PMMA)-based resin, and requires the addition of a catalyst to trigger curing. It is solvent, isocyanate and halogen-free, minimizing its environmental impact. Colour: Clear. Coverage: 0.4 kg/m² (minimum). Application temperature: 0–35°C. Application method: Roller. Rainproof time: 30 minutes (approximate). Overcoat/ traffic time: 45 minutes (approximate). Bauder LiquiPRIME 2. Guidance for specification option: A cold liquid-applied, fast-curing primer, for use when installing the Bauder LiquiTEC system over brick, block and cementitious-based substrates. The product is a poly(methyl methacrylate) (PMMA)-based resin, and requires the addition of a catalyst to trigger curing. It is solvent, isocyanate and halogen-free, minimizing its environmental impact. Colour: Clear. Coverage: 0.4 kg/m² (minimum). Application temperature: 0–35°C. Application method: Roller. Rainproof time: 30 minutes (approximate). Overcoat/ traffic time: 45 minutes (approximate).
Skirtings and vertical work	As 'Horizontal work'.
Liquid-applied waterproofing	-
Reinforcement	Bauder 110 g/m² reinforcement fleece.
System accessories	Not required. Bauder GRP Trim Angle. Guidance for specification option: Important note: To be used on parapets and perimeter kerbs over 200 mm in width – must not be used on its own as a check kerb. Product: Bauder GRP Trim Angle Length: 3 m Face depth: - 100/60 Angle: 60 mm - 150/75 Angle: 75 mm Fixing arm: - 100/60 Angle: 100 mm - 150/75 Angle: 150 mm Installation: - Carrier Membrane (where applicable): - Apply the specified primer to the detail and dress the carrier membrane up and over the perimeter detail. Please refer to Bauder standard detail drawings. Setting out: The new trim must cover any open joint, which may exist between the kerb and the top of the wall by a distance of minimum 20 mm.The trims must be bedded in Bauder LiquiPASTE and mechanically fixed with corrosion resistant flush headed screws. Fasteners: Screw fasteners of type appropriate to kerb or deck substrate. Nail fixing is not permitted. Fixing: 30 mm from ends and at 300 mm (maximum) centres, stagger fixed. In high wind risk areas or above 10m high, fixing centres are to be at no more than 150 mm Corner pieces: Purpose made to suit orientation of trim. Completion: Contact surfaces: Clean with Bauder PMMA Cleaner to remove dust or any other contamination from the trim surface. Mask off the top of the trim recess. - Waterproofing: Dress the full Bauder LiquiDETAIL system over the trim to its full extent and past the edge of the downward facing edge. Once the system has cured, the excess is to be trimmed off to a neat finish. Bauder Aluminium Termination Bar. Guidance for specification option: Natural finish aluminium alternative to a lead counterflashing, for use at upstand details to give protection to the top edge of the waterproofing. It should be restricted to use on upstands where a chase cannot be cut into the wall. Bauder GRP Termination Bar. Guidance for specification option: Black glass-reinforced plastic (GRP) alternative to a lead counterflashing, for use at upstand details to give protection to the top edge of the waterproofing. It should be restricted to use on upstands where a chase cannot be cut into the wall. Bauder lightning conductors. Guidance for specification option: Lightning conductor clips are specially designed, secure clips that allow for movement. Bauder Lightning conductor – Type 4: polyvinyl chloride (PVC)-coated or bare conductor. Bauder LiquiDETAIL. Guidance for specification option: Cold liquid-applied, fast-curing waterproofing resin that can be used on upstands and details. PMMA-based resin that requires the addition of catalyst to trigger curing, and is solvent, isocyanate and halogen-free. Bauder rooflights/ glazing/ ventilation. Guidance for specification option: All these glazing products are fully compatible with the roof waterproofing systems. Consult manufacturer for details and insert requirements. BauderDOME Rooflight. Bauder Euroglaze Rooflight. Bauder Special Modular Rooflight. Bauder Continuous Rooflight. Bauder Walk-on Rooflight. Bauder Direct Glazing. Bauder AOV. Bauder Modular Link Glazing. Bauder Structural Rooflight. Bauder Fire Rated Rooflight. BauderFLATGLASS rooflight. Thermofol PVC Rigid Outlet. Guidance for specification option: A rigid PVC outlet enabling Themofoil membrane to be welded to the flange plate. UV stable throughout.
Wearing course	LiquiDEK, Blue grey (RAL 7031). Guidance for specification option: As standard. Cold liquid-applied, fast-curing waterproofing resin. LiquiFINISH, Stone grey (RAL 7030). Guidance for specification option: A fast curing cold applied liquid final coat. LiquiFINISH, Traffic grey (RAL 7043). Guidance for specification option: A fast curing cold applied liquid final coat.
Surfacing layer	Bauder LiquiDEK incorporating Bauder quartz.

Sustainability data

Contains Red List materials	No
Country of material origin	Germany
Country of product manufacture	Germany
Material	Polymethyl methacrylate (PMMA) Manufacturer guidance Liquid applied polymethyl methacrylate membrane.