Classic Electronic Sensor Tap

Combining the benefits of no-touch technology with water savings and robust reliable performance, no-touch automatic taps are an ideal choice for washrooms across a wide variety of applications, offering benefits to commercial and public sector environments. Suitable for use by the elderly or disabled and the superior heavy duty construction offers resistance to vandalism and misuse. DVS no-touch taps have been extensively developed and tested to achieve high levels of reliability and consistent performance, combined with attractive design options.

Features and benefits:

• Fully programmable.
• Hygienic.
• Reliable.
• Provide water savings.
• Easy to use – ideal for disabled or elderly.
• Battery or mains powered.
• Adjustable run on time.
• Adjustable range and trigger level.
• Adjustable anti-vandal lockout time.
• Automatic purge.
• Adjustable purge run times.
• Commissioning flush.

Controls:

- Tap Control System:

The tap control system can be used to control mixed water for one or two taps, or to control both hot and cold on a single tap using two sensors. The control system can be used with wave-on or tactile sensors. The tap control system also features built-in purge control option to avoid stagnation. When a user waves their hand past the sensor (or pushes the tactile switch) the control system activates the solenoid valve, the valve will then run for a pre-set time before automatically closing the valve and stopping the tap.

- Purge controller:

The automatic tap purge controller reduces the risk of Legionella by purging the taps if they have not been operated for a predefined time. Purge run times are adjustable and can be set between 5 seconds and 5 minutes. A periodic purge can be switched on or off.

- Battery backup unit:

The automatic tap battery backup unit will automatically switch from mains supply to battery in the event of a power failure (comes complete with AT00-024 battery pack). When mains power is restored the unit will switch back to mains supply.