NBS Source
I'm a manufacturer

Cold Applied Liquid for Roofs, Balconies & Terraces - IKO Metatech

Verified by manufacturer 2 months ago

IKO Ireland

Two-component polymethyl methacrylate (PMMA)-based waterproofing resin system.

Jump to:
+353 1 88 55 090 Website

Application

IKO metatech is used as fully reinforced waterproofing resin in the

following liquid waterproofing systems:

  • IKO metatech Roof.
  • IKO metatech Balcony.
  • IKO metatech Car Park.

Description

A two-component coating based on methacrylates that cures after the hardener powder has been incorporated. Apart from fast curing (after only 45 minutes), it is also characterized by rapid installation, as the second layer is applied wet-on-wet to the first layer.


ETA-15/0478 certificate (European Technical Assessment) according to ETAG005. CE Marked.


Features and benefits:

  • Two-component: extremely fast installation and drying.
  • Sustainable PMMA technology.
  • Installation possible under poor weather conditions.
  • Viscous: does not drip down when applied vertically.
  • IKO guarantee up to 25 years.
  • Approved contractor and installer application.
  • Consumption rate of min 3 kg/m².

General information

Color

Grey

Material

Polymethyl methacrylate (PMMA)

Length

Bespoke

Width

Bespoke

Uniclass

Ss_30_40_30_42 Liquid-applied inverted roof covering systemsPrimary

CAWS

J31/12 Inverted roof coating

J31/130 Inverted roof coating

Specification data - Liquid-applied inverted roof covering systems

Preparation

-

Horizontal work

IKO metatech porous surface primer.

IKO metatech non porous surface primer.

Skirtings and vertical work

IKO metatech porous surface primer.

IKO metatech non porous surface primer.

Carrier membrane

-

Type

Guidance for specification option:

IKO Systems H-A underlays are polyester reinforced bitumen membranes used as underlays within a built up roofing system, The membranes are coated on both sides with self-adhesive bitumen SBS elastomeric coating. They have a fine mineral upper surface with a 75 mm release film selvedge to facilitate rapid installation of lap joints. Size: 1 x 16 m.

Liquid-applied waterproofing

-

Type

IKO metatech waterproofing.

Guidance for specification option:

A two-component coating based on methacrylates that cures after the hardener powder has been incorporated. Apart from fast curing (after only 45 minutes), IKO metatech Detail is also characterised by rapid installation, as the second layer is applied wet-on-wet to the first layer.

Reinforcement

IKO Protection Fleece.

Guidance for specification option:

A reinforcement fleece consisting of non-woven polyester with a density of 110 g/m². This fleece is rolled out in the wet first layer of IKO metatech Detail and pressed in areas that are subject to heavy footfall. It therefore ensures the strength, stability and longevity of the system.

Insulation

-

Type

IKO enertherm XPS insulation, 600 x 1250 mm.

Guidance for specification option:

IKO enertherm XPS is a light orange rigid extruded polystyrene (XPS) board with a Global Warming Potential (GWP) of less than five. A lightweight, lap jointed board with high compressive strength and performance. Thermal performance of an inverted roof is improved when used in conjunction with IKO enertherm WCL. Used for the thermal insulation of a wide variety of flat roofs including an inverted roof below ballast or paving slabs or a green/garden roof. BBA certified 17/5467. Thickness: 50, 70, 100, 130, 160, 180, 200, 220 mm available, consult literature and insert requirements.

Water control layer

IKO enertherm WCL (Water control layer).

Ballast

IKO Paving supports and 50 mm paving.

50 mm ballast.

Colour

Stone grey, RAL 7043.

Pebble grey RAL 7032.

Density

+/- 1,22 g/cm³.

Guidance for specification option:

This relates to the IKO Metatech coating.

Hardness

+/- 62 (Shore A 23°C).

Guidance for specification option:

This relates to the IKO Metatech coating.

TensileStrength

+/- 4,5 N/mm².

Guidance for specification option:

This relates to the IKO Metatech coating.

Elongation

+/- 240%.

Guidance for specification option:

This relates to the IKO Metatech coating.

Viscosity

+/- 17 dPas (25°C, 20 rpm, spindle3).

Guidance for specification option:

This relates to the IKO Metatech coating.

Curing time

Pot life: +/- 15 min. Rain proof: +/- 30 min. Can be walked on: +/- 45 min. Fully cured: +/- 2 h.

Manufacturer guidance

This relates to the IKO Metatech coating.

Storage

12 months in the hermetically sealed packaging, when stored in a dry,
cool and frost-free place.

Guidance for specification option:

Keep the edges of the tin clean.


When closing the tin, place the lid and the lever lock ring in the

correct way and remove any product that might remain on the tin.

Standards

To ISO 9001, ISO 14001.

Outlets

IKO Elite Outlets.

Sustainability data

Material

Polymethyl methacrylate (PMMA)

Literature

Brochure - IKO PLC ESG Report July 2023

Brochure - IKO PLC ESG Report July 2023

Similar products from IKO Ireland

IKO Permatec Anti-Root Hot Melt Roofing System

IKO Permatec Anti-Root Hot Melt Roofing System

IKO Permatec Ecowrap

IKO Permatec Ecowrap

Single-Component Cold Applied Liquid System for Inverted Roofs - IKO 1K PU Hybritech - Waterproofing system

Single-Component Cold Applied Liquid System for Inverted Roofs - IKO 1K PU Hybritech - Waterproofing system