Single-Component Cold Applied Liquid System for Inverted Roofs - IKO 1K PU Hybritech - Waterproofing system
Verified by manufacturer 2 months ago
Single component, odour-free liquid waterproofing system.
Application
Inverted flat roof constructions.
Description
A solvent-free and odour-free single-component liquid waterproofing system based on flexible hybrid polymers. It cures through reaction with the air humidity and it is used as a fully reinforced waterproofing resin in the IKO Hybritech Liquid Waterproofing System.
Features and benefits:
- Excellent durability and puncture resistance.
- Highly flexible in design application, simplifying complex detailing.
- Wet on wet application saves time.
- Does not require a primer.
- Suitable for most roof types.
- IKO 20 year guarantee.
- Approved contractor and installer application.
- Consumption rate of min 2.5 kg/m².
General information
Color | Grey |
Material | Polymer |
Length | Bespoke |
Width | Bespoke |
Warranty description | 20 year |
Uniclass | |
CAWS | J31/12 Inverted roof coating J31/130 Inverted roof coating |
Specification data - Liquid-applied inverted roof covering systems
Preparation | |
Horizontal work | IKOpro Bonding Agent.Guidance for specification option: IKOpro Systems Bonding Agent (black) is a specially formulated primer. Enhancing the properties of self- adhesive bitumen roofing membranes, it promotes strong bonds even at temperatures as low as 5°C. IKOpro Sprayfast MPP.Guidance for specification option: KOpro Sprayfast MPP (Black, Multipurpose Primer) is a specially formulated high performance bonding primer. It allows the speed of application of the bonding primer to be five times faster than conventional bitumen primers, promoting strong bonds at temperatures as low as 5°C. For self adhesive and torch applied bitumen membranes. IKOpro Quick Dry Primer.Guidance for specification option: IKOpro Quick Dry Bitumen Primer (black) is a fast-drying bitumen priming solution for torch applied bitumen membranes. Hybritech Bitumen Primer.Guidance for specification option: IKO hybritech Bitumen Primer is a white single-component water based primer with excellent penetration properties. |
Skirtings and vertical work | IKOpro Bonding Agent.Guidance for specification option: for self adhesive bitumen membranes only. IKOpro Sprayfast MPP.Guidance for specification option: for self adhesive and torch applied bitumen membranes. IKOpro Quick Dry Primer.Guidance for specification option: for torch applied bitumen membranes. Hybritech Bitumen Primer.Guidance for specification option: IKO hybritech Bitumen Primer is a white single-component water based primer with excellent penetration properties. |
Carrier membrane | |
Type | Guidance for specification option: IKO Systems H-A underlays are polyester reinforced bitumen membranes used as underlays within a built up roofing system, The membranes are coated on both sides with self-adhesive bitumen SBS elastomeric coating. They have a fine mineral upper surface with a 75 mm release film selvedge to facilitate rapid installation of lap joints. Size: 1 x 16 m. |
Liquid-applied waterproofing | |
Type | IKO hybritech waterproofing.Guidance for specification option: IKO hybritech is a isocyanate free, solvent free and odour free single component coating based on flexible hybrid polymers. IKO hybritech cures through reaction with the air humidity. |
Reinforcement | IKO Protection Fleece.Guidance for specification option: A reinforcement fleece consisting of non-woven polyester with a density of 110 g/m². This fleece is rolled out in the wet first layer of IKO metatech Detail and pressed in areas that are subject to heavy footfall. It therefore ensures the strength, stability and longevity of the system. IKO 110 sgm Polyester Fleece. |
Insulation | |
Type | Unilin XPS insulation board.Ravatherm XPS insulation board.Fibran XPS insulation board. |
Water control layer | IKO enertherm WCL (Water control layer). |
Ballast | IKO Paving supports and 50 mm paving.50 mm ballast. |
Colour | Dusty grey (RAL 7037). |
Density | +/- 1,37g/cm³. Guidance for specification option: This relates to the waterproof coating layer. |
Viscosity | +/- 6.500 mPas (25°C, 5 rpm, spindle 5). Guidance for specification option: This relates to the waterproof coating layer. |
Hardness | +/- 80 (Shore A 23°C). Guidance for specification option: This relates to the waterproof coating layer. |
TensileStrength | +/- 5 N/mm². Guidance for specification option: This relates to the waterproof coating layer. |
Elongation | +/- 120%. Guidance for specification option: This relates to the waterproof coating layer. |
Application temperature | Air temperature: 5°C - 35°C. Substrate temperature: 5°C - 30°C. Product temperature: 5°C - 30°C. Manufacturer guidanceThis relates to the waterproof coating layer. |
Storage | 6 months in the hermetically sealed packaging, when stored in a dry, Guidance for specification option:
Manufacturer guidanceThis relates to the waterproof coating layer. |
Standards | To ISO 9001, ISO 14001. |
Outlets | IKO Elite Outlets. |
Sustainability data
Material | Polymer |
Literature
Brochure - IKO PLC ESG Report July 2023