CorruSec SR3 (C5) Rated Security Fencing
Verified by manufacturer 4 months ago
CorruSec SR3 (C5) Rated Security Fencing
CorruSec SR3 (C5) Rated Security Fencing
High security fencing system, providing a ten minute delay.
Application
Suitable for protecting assets on sites, including:
- Water utility sites.
- Oil and gas compounds.
- Data centres.
- Other sites of Critical National Infrastructure (CNI).
Description
High security, patent pending perimeter fencing solution, tested with a minimum delay time of ten minutes.
Features and benefits:
- Unique configuration of welded mesh panels, which have been tested to defeat a wide range of attack methods, including hand and power tools.
- Provides good visibility for use with CCTV camera systems.
- Can be used in conjunction with a variety of fence security toppings.
- Concealed fixings.
- Features a maximum corrugated infill of 2.4 m high.
- Manufactured in accordance with BS 1722, Part 14.
General information
Finish | Galvanized Powder-coated |
Material | Metal |
Width | 2515 mm |
Height | 2438 mm 2997 mm 3302 mm 4204 mm 5207 mm |
Uniclass | |
CAWS | Q40/125 Open mesh steel panel general purpose fencing Q40/126 Open mesh steel panel security fencing Q40/27 Open mesh steel panel general purpose fencing Q40/30 Proprietary fencing Q40/430 Proprietary fencing |
Specification data - Metal mesh panel fencing systems
Standard | To BS 1722-14, ISO 12944. |
Posts | 80 x 80 mm square hollow section (SHS) posts.Guidance for specification option: Centres: 2540 mm. |
Panels | HiSec Super 10 flat front and rear panels and a corrugated HiSec 3/5/10 mesh panel in the centre.Guidance for specification option: Each flat panel features a 76.2 x 12.7mm mesh configuration with 4 mm horizontal and 10mm vertical wires. All three layers are bolted together using bolts fixed into place in a grid pattern throughout the combined fence panel. |
Fence topping | Manufacturer guidanceConsult manufacturer and insert requirements. |
Height | 2400 mm. Manufacturer guidanceAdditional heights available upon request. |
Applied finishes | Galvanized and polyester powder-coated (PPC). |
Colour | Guidance for specification option: Insert RAL colour requirement. |
Fixing | Base plated, bolt down. In ground. Through bolts. Washers. Nuts and anti tamper security fxings. |
Panel fixings | Panel assembly is fixed to the posts using 80 mm full-height clamp bars with fixing centres of 228.6 mm. |
Gates | Guidance for specification option: Consult manufacturer and insert requirements. |
WireDiameter | 3 mm / 3 mm. Guidance for specification option: Vertical x Horizontal. |
Width | 2515 mm. |
Mesh size | 76.2 x 12.7 mm. |
Literature
High Security Perimeter Fencing
Vehicle Gates & Pedestrian Gates & Barriers