Verified by manufacturer 4 months ago
BRE Certificate
Certificate type
Security Rated Double Wire Rigid Mesh Fencing to LPS 1175 SR1 (A1) and Secured by Design (SBD)
Tested and Certified to offer a guaranteed minimum delay of at least 60 seconds, the Duo8 SR1 double wire system is your first line of protection where Secured by Design accreditation is required. It is manufactured from dual horizontal 8 mm wires sandwiching a single 6 mm vertical wire, producing a 50 x 200 mm mesh pattern that is strong and vandal resistant.
Fence panels are available in 2.0–2.4 m heights.
Coupled with Zaun’s tamper-resistant fasteners, the result is a rigid perimeter fence that offers a high degree of vandal resistance and an extremely high level of through visibility. This fencing system offers the same product benefits as the standard Duo8, but with added security and tamper-resistant clamp bars and fixings.
Features and benefits:
Finish | Galvanized Powder-coated |
Material | Metal |
Width | 2510 mm |
Height | 2430 mm 2030 mm |
Uniclass | |
CAWS | Q40/125 Open mesh steel panel general purpose fencing Q40/27 Open mesh steel panel general purpose fencing Q40/30 Proprietary fencing Q40/430 Proprietary fencing |
Standard | To BS1722, ISO 12944. |
Posts | 60 x 60 mm rectangular hollow section (RHS) posts.Guidance for specification option: Spaced at a maximum of 3025 mm centres. |
Panels | Duo8 SR1 mesh.Guidance for specification option: Comprising 50 x 200 mm mesh with single 6 mm wires, vertical wires are at 50 mm centres, dual 8 mm horizontal wires at 200 mm centres. |
System accessories | Not required.Pedestrian gates.Guidance for specification option: Single leaf, 1.2 m wide, or width to suit, consult manufacturer and insert requirements. Vehicular gates.Guidance for specification option: Double leaf, 3.0 m wide, or width to suit, consult manufacturer and insert requirements. |
Height | 2030 mm. 2430 mm. 3030 mm. |
Applied finishes | Galvanized and polyester powder coated. |
Width | 2510 mm. Manufacturer guidanceOptional sizes available on request. |
Fixing | Bolt down. In ground. Wall. |
Gates | 50 x 50 mm RHS frame, Zaun Duo8 mesh welded inside the frame, with slide latch, rubber bump stop and two gate posts. Guidance for specification option: Vehicular access also supplied with drop bolts. |
Projection | Minimal. Standard. |
Panel fixings | Panels fixed to posts with full height 40 x 5 mm clamp bar with stainless steel fixings at 400 mm centres. Guidance for specification option: The full height clamp bars create a flush safe finish with the mesh ends behind the clamp bar, with an enhanced over clip on the upper most and lower most fixings. |
SecurityRating | SR1. Guidance for specification option: Opportunist attack by bodily force using minimal tools (screwdriver, knife, pliers). |
Mesh size | 200 x 50 mm. |
Fixings | Anti tamper security fixings. |
Country of product manufacture | United Kingdom |