NBS Source
I'm a manufacturer
Compare variants

CorruSec SR3 (C5) Rated Security Fencing

Verified by manufacturer 3 months ago

CorruSec SR3 (C5) Rated Security Fencing

Zaun Limited Variant:

High security fencing system, providing a ten minute delay.

Jump to:
+44 (0)1902 796699 Website

Application

Suitable for protecting assets on sites, including:

  • Water utility sites.
  • Oil and gas compounds.
  • Data centres.
  • Other sites of Critical National Infrastructure (CNI).

Description

High security, patent pending perimeter fencing solution, tested with a minimum delay time of ten minutes.


Features and benefits:

  • Unique configuration of welded mesh panels, which have been tested to defeat a wide range of attack methods, including hand and power tools.
  • Provides good visibility for use with CCTV camera systems.
  • Can be used in conjunction with a variety of fence security toppings.
  • Concealed fixings.
  • Features a maximum corrugated infill of 2.4 m high.
  • Manufactured in accordance with BS 1722, Part 14.

General information

Finish

Galvanized

Powder-coated

Material

Metal

Width

2515 mm

Height

2438 mm

2997 mm

3302 mm

4204 mm

5207 mm

Uniclass

Ss_25_14_61_51 Metal mesh panel fencing systemsPrimary

CAWS

Q40/125 Open mesh steel panel general purpose fencing

Q40/126 Open mesh steel panel security fencing

Q40/27 Open mesh steel panel general purpose fencing

Q40/30 Proprietary fencing

Q40/430 Proprietary fencing

Specification data - Metal mesh panel fencing systems

Standard

To BS 1722-14, ISO 12944.

Posts

80 x 80 mm square hollow section (SHS) posts.

Guidance for specification option:

Centres: 2540 mm.

Panels

HiSec Super 10 flat front and rear panels and a corrugated HiSec 3/5/10 mesh panel in the centre.

Guidance for specification option:

Each flat panel features a 76.2 x 12.7mm mesh configuration with 4 mm horizontal and 10mm vertical wires. All three layers are bolted together using bolts fixed into place in a grid pattern throughout the combined fence panel.

Fence topping

-

Manufacturer guidance

Consult manufacturer and insert requirements.

Height

2400 mm.

Manufacturer guidance

Additional heights available upon request.

Applied finishes

Galvanized and polyester powder-coated (PPC).

Colour

Guidance for specification option:

Insert RAL colour requirement.

Fixing

Base plated, bolt down.

In ground.

Through bolts.

Washers.

Nuts and anti tamper security fxings.

Panel fixings

Panel assembly is fixed to the posts using 80 mm full-height clamp bars with fixing centres of 228.6 mm.

Gates

Guidance for specification option:

Consult manufacturer and insert requirements.

WireDiameter

3 mm / 3 mm.

Guidance for specification option:

Vertical x Horizontal.

Width

2515 mm.

Mesh size

76.2 x 12.7 mm.

Literature

High Security Perimeter Fencing

High Security Perimeter Fencing

Vehicle Gates & Pedestrian Gates & Barriers

Vehicle Gates & Pedestrian Gates & Barriers

Similar products from Zaun Limited

Advantage Tennis Court Fencing

Advantage Tennis Court Fencing

ArmaWeave CPNI Rated Security Fencing

ArmaWeave CPNI Rated Security Fencing

Axiom Profile Mesh Perimeter Fencing

Axiom Profile Mesh Perimeter Fencing

DualGuard Twin Wire Perimeter Fencing

DualGuard Twin Wire Perimeter Fencing

Duo Sports MUGA Fencing

Duo Sports MUGA Fencing

Duo SR1 (A1) Rated Security Fencing

Duo SR1 (A1) Rated Security Fencing

Duo-6 Perimeter Twin Wire Mesh Fencing

Duo-6 Perimeter Twin Wire Mesh Fencing

Duo8 Perimeter Twin Wire Mesh Fencing

Duo8 Perimeter Twin Wire Mesh Fencing

Gemini Concave Architectural Perimeter Fencing

Gemini Concave Architectural Perimeter Fencing

Gemini Convex Architectural Perimeter Fencing

Gemini Convex Architectural Perimeter Fencing