NBS Source
I'm a manufacturer

Damp Proofing Cream - Koster Crisin Cream

Verified by manufacturer 5 months ago

Koster Aquatecnic Ltd Third party certifications:
  • ISO 9001 Quality Management

    Certificate type

DPC injection cream with a very high amount of active ingredients.

Jump to:
+44 (0)1387 270252 Website

Application

For retro installation of a new damp proof course.


Koster Crisin Cream has 85% active ingredients and is able to function regardless of wall moisture or salt content.


The material can be installed into any open pored and capillary active constructions such as:

  • Brick.
  • Block.
  • Concrete.
  • Mortar.
  • Stone.


For more information or assistance with specification please contact the Koster Technical team on - Tecnical@kosteruk.com.

Description

Koster Crisin Cream is a system specially designed for simple and effective installation of a retroactive damp proof course (DPC).

This system can be installed from inside and/ or from the outside of the building without need for high pressure injection equipment - only a hand cartridge is required to process the material.

It can be applied in cases of high degrees of moisture penetration (95% ±5% saturation) and with all degrees of salt contamination.


Features and benefits:

  • Solvent-free.
  • Easy application.
  • Highly effective.
  • More than 85% active ingredients.


Installation:

  1. Holes with a diameter of 14 mm are drilled horizontally, ideally in the lowest masonry joint. Drill until 3 cm away from the other side of the wall - do not drill completely through the wall.
  2. The drilled holes are then cleaned by flushing with water or with compressed air. The holes are to be spaced 10 cm apart independent of the wall thickness.
  3. Koster Crisin Cream is then injected from the cartridge with the aid of an injection tube to ensure material reaches the deepest part of the pre-drilled hole.
  4. When using the 600 ml tubular bags, the tubular bags are placed in the cartridge gun fitted with the injection tube and the tubular bag opener and pressed into the holes.
  5. When installing the material, make sure that the borehole is filled evenly and without voids from the back to the front. The holes can be sealed immediately with Koster KB Fix 5 flush with the wall.


Koster Aquatecnic offer a series of finishing systems such as Koster Restoration Plaster. Please see separate NBS listing.

General information

Color

White

Finish

Natural

Material

Silane

Shape

Formless

Length

Bespoke

Width

Bespoke

Height

Bespoke

Warranty description

Ten year

Uniclass

Pr_20_31_53_41 Injection mortar damp-proof coursesPrimary

CAWS

C45/30 Chemical injection dpc system

C45/220 Chemical injection dpc system

Product range

Internal Basement Waterproofing Systems
Restoration of Masonry

Specification data - Injection mortar damp-proof courses

Material

Silane/ Siloxane emulsion.

Form

Ready mixed.

Sustainability data

Contains Red List materials

No

Country of material origin

Germany

Country of product manufacture

Germany

Recyclability

Packaging is fully recyclable.

Recycled content

As defined in clause 7.8 of BS EN ISO 14021

0 %

Third party certifications

ISO 9001 Quality Management

ISO 9001 Quality Management

Koster Bauchemie AG - ISO 9001 Certificate

Literature

Koster Waterproofing Systems: Horizontal Barriers Against Rising Damp in Masonry

Koster Waterproofing Systems: Horizontal Barriers Against Rising Damp in Masonry

Koster Waterproofing Systems Company Brochure

Koster Waterproofing Systems Company Brochure

Koster System Advice Sheet - Koster Crisin Concentrate and Koster Crisin Cream

Koster System Advice Sheet - Koster Crisin Concentrate and Koster Crisin Cream

Case studies

Hasbury Methodist Church - Koster Flooring Systems

Hasbury Methodist Church - Koster Flooring Systems

‘Our Lady Star of the Sea’ Church in Amlwch - Isle of Anglesey

‘Our Lady Star of the Sea’ Church in Amlwch - Isle of Anglesey

Waterproofing to domes on Historic Building

Waterproofing to domes on Historic Building